Posted in 2022 January-June Stampin' Up!® Mini Catalog, Animals, beginner stamper, Designer Series Paper, Easter, Fun/Fancy fold card, Rabbit

Stampin’ Up!® Easter Friends Fun Fold Easter Card

Hello my fellow crafters! Happy Friday and welcome to my Friday Fun Fold! Today’s card is an Easter card made with Stampin’ Up!® Easter Friends stamp set!

Measurements & Supplies

  • Daffodil Delight Card Stock (CS) card base: 5 1/2 x 5 3/4 inches with a score line at 1 1/2 inches with the 5 3/4 inch side on top
  • Daffodil Delight CS: 1 1/2 x 5 1/2 inches and 3 x 4 1/4 inches
  • Basic White CS: two at 2 3/4 x 4 inches
  • Flowering Fields Designer Series Paper (DSP): 4 x 5 1/4 inches and two at 1 1/4 x 5 1/4 inches
  • Bumblebee 1/4 inch Gingham Ribbon
  • Iridescent Rhinestone Basic Jewels
  • Ink: Soft Suede, Evening Evergreen and Mango Melody

Stamping

On the first 2 3/4 x 4 inch Basic White CS stamp the bunny in Soft Suede. The “Happy Easter” is done in Evening Evergreen Ink. On the second Basic White CS stamp the sentiment “sending warm and happy wishes this spring” also in Evening Evergreen Ink. The little chick is stamped in Mango Melody Ink.

Assembling the Card

Adhere the bunny card piece to the 3 x 4 1/4 inch Daffodil Delight CS. Adhere one of the 1 1/4 x 5 1/4 inch Flowering Tulip DSP to the 1 1/2 x 5 1/2 inch Daffodil Delight CS. Adhere the other 1 1/4 x 5 1/4 inch Flowering Tulip DSP to the corresponding space on the Daffodil Delight CS card base as shown. Adhere the 4 x 5 1/4 inch Flowering Fields DSP to the inside of the card base.

Adhere the little chick card piece to the inside of the card. Close the card and lay the 1 1/2 x 5 1/2 inch Daffodil Delight CS/DSP piece in place on the right. Apply adhesive to the left and right edges of the bunny card piece and adhere to the card.

Tie a small bow with the Gingham Ribbon and use a Mini Glue Dot to adhere the bow to the bunny. Add the Iridescent Rhinestone Basic Jewels and Voila! you are all set for a Happy Easter!

Supply List

Product List

Hope you have a wonderful and crafty day!

Theresa

Posted in 2021 January-June Stampin' Up!®Mini Catalog, Animals, beginner stamper, Easter, Rabbit, Simple stamping, Sponging technique

Stampin’ Up!® Springtime Joy- Stamping with Coloring & Masking

Hello and Happy Spring! I am fortunate to have some flowers starting to bloom in my garden outside! Springtime Joy is a stamp set with super cute animals to help welcome spring and Easter. Today’s card is a step up from Simple Stamping, and is simple nonetheless.

Measurements

Measurements: Basic White Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Gorgeous Grape CS: 4 x 5 1/4 inches; and Basic White CS: 3 1/2 x 4 3/4 inches.

Stamping

Start off stamping the sentiment “Welcome Spring” in Memento Black ink onto the 3 1/2 x 4 3/4 inch Basic White CS. Add the little butterfly.

The next step is to stamp the cute little bunny onto both the 3 1/2 x 4 3/4 inch Basic White CS and a piece of full sticky sheet.

Carefully fussy cut the bunny on the full sticky note. This will be used as a mask.

Sponging Around the Mask

Using a Stamping Sponge that has been cut into a small wedge, dab the sponge first on the Balmy Blue ink. Then rub in small circles on a scrap sheet of paper. Next Sponge some onto the card around the little bunny. Do the same with the Granny Apple Green ink. (For more information on Sponging check out this blog post: Sponging.)

Tip: I find it to be very easy to remove the mask by using the Take Your Pick tool.

Finishing the Card

The sponging helps to accentuate the bunny. Again using the Memento Black ink, stamp some of the flowers and tulips around the bunny.

Use whatever you like to color the card. I really enjoy using the Stampin’ Blends Alcohol Markers. The colors I used were: Daffodil Delight, Granny Apple Green, Magenta Madness, Highland Heather and Balmy Blue.

First adhere the stamped Basic White CS card piece to the 4 x 5 1/4 inch Gorgeous Grape CS. Use the Bone Folder to make a crisp fold at the 4 1/4 inch score line on the Basic White CS card base. Adhere the Gorgeous Grape CS card piece to the front of the Basic White CS card base.

Viola! You have a super cute bunny to help welcome in the Spring!

Thanks for coming by today. I am still recovering from receiving a COVID-19 vaccination. Although I am grateful for the vaccine, I have been feeling very tired since receiving it. Each day I feel better. I am going to resume the Wacky Wednesday Technique blog next week. I am planning on having something for Fun Fold Friday. See you then!

Have a most wonderful week!

Theresa

Posted in 2020 August-December Mini Catalog, Animals, beginner stamper, Fun/Fancy fold card, Nature, Outdoors, Rabbit, Winter Holiday

Stampin’ Up!® Easy Winter Fun Fold with Warm and Toasty

Hello and welcome to my Fun Fold Friday! Today I created a wintery scene with the Warm and Toasty stamp set and Feels Like Frost Designer Series Paper (DSP). This is an easy Fun Fold to do.

These little critters are having a grand time! Perfect for spreading some cheer this winter!

Measurements: Pacific Point Card Stock (CS): 4 1/4 x 11 inches with a score line at 5 1/2 inches, 4 x 10 1/4 inches with a score line at 2 1/2 and 5 inches, and 1 x 3 1/4 inches; Whisper White CS: 3 3/4 x 5 inches, 4 x
5 1/4 inches and 3/4 x 3 inches; Feels Like Frost DSP: 3 7/8 x 5 1/8 inches and two 2 3/8 x 3 5/8 inches.

Using Memento Black ink, stamp the Polar Bear, Bunnies and Reindeer onto the 3 3/4 x 5 inch Whisper White CS.

Use the Memento Black ink to stamp the Baby Polar Bear onto the bottom right corner of the 4 x 5 1/4 inch Whisper White CS. Using the Pacific Point ink stamp the sentiment “Here’s to a cool yule” next to the Baby Polar Bear.

Finish with the snowflakes stamped in Pacific Point ink. This is the inside of the card. Set aside.

Use the Stampin’ Write Markers in Crumb Cake, Early Espresso, Petal Pink, Highland Heather, Balmy Blue and Pacific Point to color the images. Don’t forget to add a little Petal Pink marker to the Baby Polar Bear’s ears and feet!

Adhere the Feels Like Frost DSP to the corresponding places on the 4 x 10 1/4 inch Pacific Point CS piece that has the score lines at 2 1/2 and 5 inches.

Adhere the Baby Polar Bear card piece to the inside of the 4 1/4 x 11 inch Pacific Point cards base after you have used the Bone Folder on the 5 1/2 inch score line to make a crisp fold.

Adhere the Feels Like Frost DSP/Pacific Point CS piece to the front of the card base.

Fussy cut all of the images.

Adhere the sentiment “Warm & toasty wishes to you” to the 1 x 3 1/4 inch Pacific Point CS. Lay all of the pieces on the card front to see where you would like everything to be.

Adhere all of the images to the card front with Stampin’ Dimensionals.

Now for some Bling! The Rhinestone Basic Jewels are perfect for adding a little more sparkle!

Viola! This easy fun fold is ready to be sent off to wish someone some winter cheer!

Thanks so much for visiting today. I am excited to get into the Holiday Spirit and make some fun festive cards! Please leave a comment and like my blog. I love hearing from you!

Product List

Have a creative Friday, and a relaxing and fun weekend!

Theresa

Posted in Animals, beginner stamper, Easter, Mini Catalog 2020, Rabbit

Kylie’s Demonstrator Training Blog Hop-April 2020

Thank you for joining us for our Stampin’ Up!® Demonstrator Monthly Team Blog Hop! We are so happy that you could join us today for this blog hop for ideas and creative inspiration. We are a group of Stampin’ Up!® Demonstrators from around the world that are taking part in training that is helping us to build a successful Stampin’ Up!® business and reach some goals we have set. We really appreciate your support.
You may be starting here or have come from another blog – either way you can find the link list at the bottom of this post so that you can see every blog post and idea today.

This card is made using the Stampin’ UP!® Welcome Easter stamp set in the 2020 Stampin’ Up!® Mini Catalog.

Thank you so much for coming by today! We have an amazing line up of Stampin’ Up!® demonstrators from around the world, and we know you are going to love all the amazing projects that you are going to see today. Don’t miss one blog link. Remember you are currently on my page – Theresa McEntee, see who is below me to know where to go next.

Blog Hop List

 

Posted in Animals, beginner stamper, Easter, Mini Catalog 2020, Rabbit, Sponging technique

Welcome Easter Cute Bunny

Hello and Good Day! I hope you amazing people are doing well and hanging in there with all the social distancing and self quarantine. It is really different. Easter will be very different as I will be “going” to mass online. Not the usual pretty dress, and new shirt and tie affair I am used too.

This is a cute Easter card with Springtime colors. It is very simple to make using the Welcome Easter stamp set in the Stampin’ UP! Mini Catalog.

Measurements: Card Base is Petal Pink card stock (CS): 8 1/2 x 5 1/2 inches with a score mark at 4 1/4 inches; Whisper White CS: 4 1/2 x 3 1/4 inches and 2 3/4 x 2 1/4 inches; Best Dressed Designer Series Paper (DSP): 5 1/2 x 2 inches; 5/8 inch Organdy Striped Ribbon 7 inches and a bow.

Let’s Get Started:

I wanted the “Happy Easter” sentiment to be able to fit inside the Pretty Label punch. One thing you can do is cut the stamps so you can use a different arrangement for the sentiments. It is a little scary at first! They do fit back together on the block so you can use the original arrangement. Use the Melon Mambo ink to stamp the ‘Happy” onto the 4 1/2 x 3 1/4 inch Whisper White CS.

Stamp the “Easter” sentiment just under the “Happy” and slightly to the right. See how it fits nicely inside the Pretty Label Punch? Go ahead and punch the sentiment out.

Stamp the bunny and the little bee in Memento ink onto the 2 3/4 x 2 1/4 inch Whisper White CS. I just love this cute bunny!

Stamp the little patches of grass in Granny Apple Green ink just under the bunny. Tip: It is best to use the size of block that most closely fits the size of the stamp. You have more control and will not rock the stamp as much, thereby avoiding the halos you can get around your stamp. Sometimes you have to place the stamp on the diagonal to achieve this.

Use the Pineapple Punch Stampin’ Write Marker to color the bee. The Petal Pink Stampin’ Write Marker is used for the bunny’s ears and feet. Add a little bit of black with the Black Stampin’ Write Marker on the bee and the bunny’s nose.

Now we are going to use the Sponging Technique. To get the sponge ready, cut the Stamping Sponges in quarters, then cut each quarter in half. I attach a square of the coordinating color of cardstock with the name of the color written on it by stapling it to the top.

The Sponging Technique is an easy way to add a slight border to the card piece. Dab the ink with the sponge, then brush the edge of the card piece back and forth as you move along the edge. Tip: Start with light pressure so you only get a little ink on the card piece. You can always add more color but you can’t take it away!

This is the completed bunny piece with just a hint of Melon Mambo ink along the edge.

Use the Sponging Technique on the Pretty Label sentiment and the strip of Best Dressed DSP. On the DSP just sponge the two long sides.

We will adhere the ribbon with Glue Dots. Apply one Glue Dot to each end of the 7 inch piece of Organdy Striped Ribbon. Tip: I find it easiest to put the ribbon on top of the Glue Dot while it is still on the roll.

Adhere the ribbon to the strip of Best Dressed DSP, slightly to the left. Use the Bone Folder to make a crisp fold on the card base.

Adhere the DSP piece to the front of the card base, slightly to the left. Use a Glue Dot to adhere the bow to the top left of the card.

Now add some Stampin’ Dimensionals to the back of the bunny and the sentiment. Tip: Make your Stampin’ Dimensionals last twice as long by cutting them in half.

Adhere the bunny piece, then the sentiment piece.

Viola! You have a very sweet Easter card! I hope you are able to observe the Easter season in a way that is still meaningful to you. It may take some creativity. Stay open to new ways of doing things. I have really been enjoying meeting with my friends on Zoom. That may be a great way for you and your family to get together.

Thank you so much for joining me today. I really enjoyed making this cute card.

Today is the last day for Stampin’ Up!’s Sale-a-bration! This is your last chance to chose free product with a $50 or $100 order. There are new items on the list which include the Dual Butterfly Punch and several DSP’s. Check out my store by clicking here.

Posted in beginner stamper, Occasions Catalog 2019, Rabbit

Sweet Baby Bunny

I just love Springtime with all the baby animals I see out in the desert! I used to have a pet bunny, a miniature Lion Head named Snowball. Yes, I know, not a very creative name, but it fit. Snowball loved to lay on his back on my lap. He would actually fall asleep that way! And as you can see I am also a fan of Thumper!

Today’s card showcases the cute bunny in Stampin’ Up!’s Fable Friends stamp set. It is very fitting for a baby card.

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches scored and folded at 4 1/4 inches, Balmy Blue 5 1/4 x 4 inches and 3 3/4 x 2 1/4 inches, Gingham Gala Designer Series paper 5 1/4 x 1 1/2 inches, Whisper White 3 1/2 x 2 inches and a strip that is 5/8 inches wide. You also need 1/2 of a Pearlized Doily.

You will need Stampin’ Up!’s Balmy Blue ink, Memento ink and Stampin’ blends in Light Crumb Cake, Dark Crumb Cake, Light Balmy Blue and Light Petal Pink. You will also need the Stampin’ Write Pineapple Punch marker (not shown),

Lastly, you will need a package of Stampin’ Up!’s Pearl Basic Jewels.

The first step is to stamp the “Sweet Baby” sentiment on the 5/8 inch strip of Whisper White using the Balmy Blue ink. Cut to about 2 1/4 inches long.

To cut the banner end, first make a cut in at the center. Next cut from either corner to the center. Viola! You have a nice, even banner edge! Set this aside.

Use the Memento ink to stamp the bunny image on the 3 1/2 x 2 inch piece of Whisper White.

Starting off with the Light Crumb Cake Stampin’ Blend, color the face, paws and body with one layer of marker. On another bunny, I had gone over the marker a second time and it made the face too dark.

Use the Dark Crumb Cake to add a little shading.

Now use the Light Crumb Cake to blend the Dark Crumb Cake. The shadow on the side of the face and on the belly under the shirt is just a second layer of the Light Crumb Cake.

Color the little jacket with Light Balmy Blue.

Add a second layer of the Light Balmy Blue to create the shadows.

Color the inside of the ears with the Light Petal Pink.

I used the Stampin’ Write Marker in Pineapple Punch for the buttons. Isn’t this little bunny so adorable?

Adhere the bunny card piece to the 3 3/4 x 2 1/4 piece of Balmy Blue.

Now adhere the Gingham Gala Designer series paper to the 5 1/4 x 4 inch piece of Balmy Blue. Adhere this piece to the Whisper White card base.

Adhere one half of the Pearlized Doily to the back of the bunny card piece.

Use the Stampin’ Dimensionals on the back of the bunny and doily card piece.

Adhere the bunny piece to the card front.

Add some Stampin’ Dimensionals to the back of the sentiment and adhere it to the card front as shown.

I wanted to make this card a little more special so I added a large pearl next to the sentiment and 2 little pearls on the doily. The easiest way to adhere the pearls is by using the Paper Piercing Tool to transfer them.

You can also use other colors to make baby cards in green, yellow or pink, depending on the situation. It is nice to have stash so you are ready when a baby card is needed!

Stampin’ Up! products used include: Stamp Set: Fable Friends #148670; Cardstock: Whisper White #100730 and Balmy Blue #146982; Gingham Gala Designer Series Paper #148554 Ink: Balmy Blue #147105 and Memento #132708; Clear Blocks: B #117147 and D #118485; Stampin’ Blends: Light and Dark Crumb Cake combo #144601, Light Balmy Blue #148540 and Light Petal Pink #146866; Stampin’ Write Markers: Pineapple Punch in the 2018-20 In Color set #147159; Pearl Basic Jewels #144219; Paper Piercing Tool #126189; Pearlized Doilies #146936; Stampin’ Dimensionals #104430 and Multipurpose Liquid Glue #110755.