Posted in 2023 January-April Mini Catalog, Aqua Painters, Emboss Resist Technique, Gratitude/ Thanks, Ink & Inspiration Blog Hop, Lake/Sea/Ocean, Nature, Sale-a-Bration 2023, Sea, Sealife, Stampin' Emboss Powder, Watercolor Techniques

Inspirations in Ink February 2023-Seaside Bay Emboss Resist Thank You Card

Today I have a Super Fun Seaside Bay Emboss Resist Thank You Card!

Welcome and thanks for visiting Theresa’s Treasures Paper Crafts! I am Theresa and I am a Stampin’ Up! Demonstrator in Arizona, USA. Today is the monthly Inspirations in Ink Blog Hop! I am excited to be hopping with awesome demonstrators from around the world. Be sure to check out everyone’s projects using the Seaside Bay Bundle. The Seaside Bay Bundle is in the 2023 Jan-April Mini Catalog. You may order form my Online Store HERE.

Seaside Bay Emboss Resist Thank You Card

Measurements

  • Balmy Blue card stock (cs) card base: 5 1/2 x 8 1/2 inches scored and folded at 4 1/4 inches
  • Textured 12×12 inch Shimmer Paper, Shaded Spruce: 4 x 5 1/4 inches (algae die cuts are from the center of this piece)
  • Fluid 100 5×7 inch Watercolor Paper: 3 1/2 x 4 3/4 inches
  • Crumb Cake cs: 1 1/2 x 4 inches for the seashell die cuts
  • Basic White cs: 4 x 5 1/4 inches (inside of card)

Supplies

  • Seaside Bay Bundle (stamp & dies)
  • Ink: Night of Navy, Shaded Spruce, Balmy Blue & Coastal Cabana
  • Versamark
  • Stampin’ Emboss Powder, Basics, White
  • Heat Tool
  • Water Painters, large pointed tip
  • Stampin’ Spritzer
  • Flat Adhesive-Backed Pearls
  • Wink of Stella Glitter Brush
  • Stampin’ Cut & Emboss Machine
Seaside Bay Emboss Resist Thank You Card

Instructions

Step 1- Emboss the Watercolor Paper

  1. Using the Versamark Ink stamp the images onto the Fluid 100 Watercolor Paper.
  2. Stamp two images, then cover them with the White Emboss Powder. Shake off the excess.
  3. Use the Heat Tool to set.
  4. Stamp two more images and repeat.
  5. That way you can see where you stamped to avoid stamping on top of another image.

Step 2- Emboss Resist Technique

  1. Prepare several layers of paper towels to work on.
  2. Squeeze each of the colored ink pads to get ink on the inside of the lid. Open & set up in a line above the paper towels.
  3. Use the Stampin’ Spritzer to spray water on the embossed Watercolor Paper. The water beads up on the paper.
  4. Use the Water Painter to pick up ink from the lid.
  5. Brush the ink onto the moist Watercolor Paper one color at a time.
  6. TIP: In between colors, squeeze water from the Water Brush onto a paper towel until it runs clear.
  7. Dry overnight. Or use the Heat Tool to speed up the drying process.

Step 3- Assembling the Card

  1. Use the Stampin’ Cut & Emboss Machine and the Seaside Bay Dies to cut one large & one small algae from the center of the Shaded Spruce Textured Shimmer Paper. C
  2. Cut 2 small & one large seashell from the Crumb Cake cs.
  3. Adhere the Basic White cs to the inside of the Balmy Blue cs card base.
  4. Adhere the Shaded Spruce Textured Shimmer Paper to the card front.
  5. Use Stampin’ Dimensionals to adhere the embossed & watercolored card piece to the card front.
  6. Adhere the large algae diecut to the bottom left corner of the card front. Adhere the small algae.
  7. Adhere the seashells

Step 4- Bling!

  1. First add some Wink of Stella to the seashells.
  2. Then add some of the Flat Adhesive-Backed Pearls.

Voila!

Seaside Bay Emboss Resist Thank You Card

Thank you so much for visiting today! Please visit all the blogs in this hop. You will see all the fun and inspiring projects made by the Inspirations In Ink demonstrators. You are currently visiting Theresa McEntee-USA creator of Theresa’s Treasures Paper Crafts.

Julie Golding Page – Canada   

Rebecca Nutley – Australia

Robbie Rubala – USA   

Theresa McEntee – USA  

Vicky Wright – Australia

Christy Gridley – USA  

Deirdre Croal – USA

Clickable Supply List

Product List

Have a most wonderful and creative day!

Theresa

Would you like your own Mini Cut & Emboss Machine? How about a Boho Blue Mini Cut & Emboss Machine! Join my Stamping Gems Team today and you can get a Mini Cut & Emboss Machine in your starter kit! Or if you already have a Cut & Emboss Machine and have a long wish list, you can join and get $175 UDS in product for $129 USD! This is the best deal! Click HERE to order your starter kit!

Thinking of adding creativity to your life? Try a monthly paper crafting kit! The Paper Pumpkin Monthly Subscription delivers a kit with everything you need to make a project-right to your door! Sign up for a Pre-paid Paper Pumpkin Subscription HERE. The February kit has an Add On Die that coordinates with the images in the kit!

Ciao!

Posted in 2023 January-April Mini Catalog, Gratitude/ Thanks, Quick & Easy Handmade Cards

Quick & Easy Something Fancy Thank You Card for Kylie & Bruno Bertucci’s Demonstrator Training Program Blog Hop-January 2023

Hello! Thank you for visiting today to see this Quick & Easy Something Fancy Thank You Card!

Welcome to the Kylie & Bruno Bertucci’s Demonstrator Training Blog Hop for January 2023. I’m Theresa with Theresa’s Treasures Paper Crafts. I am so glad you are joining me today! We are a group of Stampin’ Up! Demonstrators from around the world. We are taking part in training to help us build a successful Stampin’ Up! business. Today’s card will be my customer Thank You card for anyone ordering from my Online Store in January. This blog hop is also full of ideas and creative inspiration! Be sure to visit everyone’s blog by clicking on the links at the end of my blog.

This Quick & Easy Something Fancy Thank You Card is made using the awesome Fancy Flora 6 x 6 inch Designer Series Paper. The “Thank You” sentiment is part of a must-have sentiment set Something Fancy. The Something Fancy stamp set has sentiments for a variety of common card themes!

The beauty of the Quick & Easy Something Fancy Thank You Card is that you can use a variety of the Stampin’ Up! colors. TIP: The coordinating colors are always listed on the back of the package of Designer Series Paper. The colors for the Fancy Flora DSP that I chose are: Balmy Blue, Night of Navy, Orchid Oasis, Fresh Freesia & Calypso Coral.

Measurements

  • Basic White card stock (cs) card base: 4 1/4 x 11 inches with a score line at 5 1/2 inches
  • Basic White cs: 2 x 2 inches for the sentiment
  • Colored cs: 3 3/4 x 5 inches & 1 3/4 x 1 3/4 inches
  • Fancy Flora DSP: 3 1/2 x 4 3/4 inches

Supplies

  • Stylish Shapes Dies
  • Iridescent Pastel Gems
  • Stampin’ Cut & Emboss machine or Mini Stampin’ Cut & Emboss Machine
  • Multipurpose Liquid Glue
  • Stampin’ Dimensionals
  • Take Your Pick Tool (for moving the gems)

This version of my Quick & Easy Something Fancy Thank You Card is done with Orchid Oasis cs.

Instructions

  1. Stamp the “Thank You” sentiment in Orchid Oasis Ink onto the
    2 x 2 inch Basic White cs.
  2. Use the Stampin’ Cut & Emboss Machine and the second to the smallest stitched square die in the Stylish Shapes Dies to die cut the sentiment.
  3. Adhere the Fancy Flora DSP to the Orchid Oasis cs. Then adhere the panel to the front of the Basic White cs card base.
  4. Use glue to adhere the 1 3/4 x 1 3/4 inch Orchid Oasis cs square to the sentiment at a slight angle. Then use Stampin’ Dimensionals to adhere the sentiment to the card front.

Now for some Bling! The Iridescent Pastel Gems come in 3 colors-Balmy Blue, Calypso Coral and Gold. I used 3 of the Balmy Blue gems around the sentiment to add a little sparkle!

Voila!

Use a variety of the designs in the Fancy Flora DSP along with different colors of card stock to create your own set of the Quick & Easy Something Fancy Thank You Card!

Remember to visit everyone’s blog. You will see creative inspiration from Demonstrators around the world! You are currently at Theresa McEntee-Theresa’s Treasures-USA. Enjoy!

I appreciate your visit to Theresa’s Treasures Paper Crafts blog today. Remember to sign up for my Theresa’s Treasures Paper Crafts Newsletter. You can click on the “Subscribe to my Newsletter” tab. Please subscribe to my blog as well. If you need any assistance with placing your order, let me know in the comments. Thanks!

Have a most wonderful & crafty day!

Theresa

Product List

Would you like your own Mini Cut & Emboss Machine? How about a Boho Blue Mini Cut & Emboss Machine! Join my Stamping Gems Team today and you can get a Mini Cut & Emboss Machine in your starter kit! Or if you already have a Cut & Emboss Machine and have a long wish list, you can join and get $175 UDS in product for $129 USD! This is the best deal! Click HERE to order your starter kit!

Posted in 2022-23 Stampin' Up! Annual Catalog, 2023 January-April Mini Catalog, 3D Embossing Folder, Designer Series Paper, Gratitude/ Thanks, Stamparatus, Stampin" Blends Alcohol Markers

Kylie’s International Blog Highlights Gallery-January 2023: Two-Tone Flora & Something Fancy Thank You

I am so excited to be participating in Kylie Bertucci’s International Blog Highlight Gallery with my Two-Tone & Something Fancy Thank You card, along with Stampin’ Up! demonstrators from around the world! The theme for this Gallery is “Thank You”.

We often forget those simple words – “Thank you”. However, it really is important to show your appreciation to the people in your life who have helped you or inspired you in some way. And don’t forget those who have supported you. Be sure to send a handmade thank you card to express your appreciation often. Spread joy! We really need more joy in the world today!

This thank you card spotlights the Two-Tone Flora stamp set, Two-Tone Flora Dies, Something Fancy stamp set & Something Fancy Dies, The Embossing Folder is the new Cane Weave 3D. The cool geometric paper is the Dandy Designs 12 x 12 inch Designer Series Paper (DSP), FREE during Sale-a-bration with a qualifying order. The current Host Code is MBR2U6TN.

Measurements

  • Basic White card stock (cs) card base: 4 1/4 x 11 inches with a score line at 5 1/2 inches
  • Basic White cs: 2 x 2 inches (to stamp & die cut the sentiment),
    3 x 3 inches (to die-cut the stitched circle) and enough scrap to stamp all of the images on
  • Calypso Coral cs: 4 x 5 1/4 inches
  • Petal Pink cs: 1 1/4 x 3 3/4 inches (to die cut the banner) and
    2 1/4 x 5 1/8 inches
  • Dandy Designs DSP: 2 x 5 inches

Supplies

Instructions

  • I recommend using the Stamparatus for Two-Step Stamping. I find it is much easier to line up the second stamp. Each flower is a Two-Step Stamp. Stamp the larger part of the flower in Petal Pink Ink first. Then stamp the detailed stamp in Calypso Coral. The small bunch of flowers is stamped in Fresh Freesia Ink first. Then stamped in Blackberry Bliss Ink. Use the Blackberry Bliss Stampin’ Write Marker to draw the center of each of the Petal Pink flowers.
  • Next, stamp the “Thank You” sentiment in Blackberry Bliss Ink. Die cut the sentiment using the Something Fancy Dies.
  • Use the Stylish Shapes Dies to die cut the 2 1/2 inch stitched circle and the banner.
  • Use the Stampin’ Cut & Emboss Machine to emboss the 4 x 5 1/4 inch Calypso Coral cs with the Cane Weave Embossing Folder
  • Adhere the Cane Weave card piece to the front of the Basic White cs card base.
  • Adhere the Dandy Designs DSP to the 2 1/4 x 5 1/8 inch Petal Pink cs. Then adhere this to the left side of the card front.
  • Use Stampin’ Dimensionals to adhere the sentiment.
  • Adhere the Petal Pink cs banner. Use Stampin’ Dimensionals to adhere the Basic White cs stitched circle.
  • Place the flowers as desired. Use Stampin’ Dimensionals on some flowers. Add the leaves.
  • Color the White Seam Binding Ribbon with the Dark Fresh Freesia Stampin’ Blend Alcohol Marker. Tie into a bow. Adhere to the card front with a Mini Glue Dot.

Bling! Use the Adhesive-Backed Milky Dots in Petal Pink to add Bling! to the card front.

Voila!

Experiment with different colors to see which one you like best!

I hope you enjoyed my card today using the new Two-Tone Flora and Something Fancy Bundles. Visit my Online Store to order what you need to make this card for yourself. Please use Host Code MBR2U6TN

Please vote for my card today by clicking on the Vote Button. You will be taken to the Gallery. My card is
# 20. Click on the small heart in the upper right corner to vote. Thanks in advance.

Product List
Stamparatus
[146276]
$49.00

Thanks again for stopping by! Have a most wonderful and crafty day!

Theresa

Joining Special

Joining my Stamping Gems Team couldn’t be better. You have 3 options as shown on the image above. If you have any questions email me at theresastreasures.az@gmail.com. I would love to talk with you!

2023 Sale-a-bration now until February 28, 2023

Check out the Sale-a-bration Brochure to see all of the FREE products you can earn with a qualifying order. Note: Ordering the two-Tone Flora Bundle & the Something Fancy Bundle will allow you to choose the Dandy Designs DSP for FREE!

2023 Mini Catalog now until April 30, 2023

Check out all the new Stampin’ Up! products in the 2023 Jan-Apr Mini Catalog!

Click on the images above to view the Sale-a-bration Brochure & the 2023 January-April Mini Catalog. Keep a list and visit my Online Store using the current host code HERE

Posted in 2023 January-April Mini Catalog, Animals, Designer Series Paper, Heart, Love/Affection, Stamparatus, Valentine's Day

Stampin’ Up! Love Cats Valentine-simple and fast

Hello fellow stampers! I have a very simple and cute Love Cats Valentine’s card today. The stamp set is Love Cats from the Stampin’ Up! 2023 January-April Mini Catalog! You can start purchasing product from the Mini Catalog today! You can order from my Online Store HERE!

Measurements

  • Basic White card stock (cs) card base: 4 1/4 x 11 inches with a score line at 5 1/2 inches
  • Basic White cs: 2 3/4 x 4 inches
  • Melon Mambo cs: 3 1/4 x 3 1/2 inches
  • Flirty Flamingo cs: 3 x 4 1/4 inches
  • Dandy Designs 12 x 12 inch Designer Series Paper: 4 x 5 1/4 inches (FREE with $100 order during Sale-a-bration!)

Supplies

  • Love Cats stamp set
  • Stamparatus
  • Memento Black Ink
  • Melon Mambo Ink
  • Melon Mambo Stampin’ Write Marker
  • Opaque Adhesive-Backed Gems
  • Scotch Tape
  • Stampin’ Dimensionals
  • Multipurpose Liquid Glue

Instructions

  1. I strongly recommend using the Stamparatus for the cat. Stamping solid images is much easier when you use the Stamparatus because you can re-stamp several times to get a nice solid black color.
  2. Cover the little heart with a piece of scotch tape before you apply the Memento Black Ink. Remove the piece of tape before stamping onto the 2 3/4 x 4 inch Basic White cs. Repeat as many times as you need to in order to get a nice black cat.
  3. Then use the Melon Mambo Stampin’ Write Marker to apply ink to the little heart. Stamp and repeat until dark enough.
  4. Stamp the sentiment with the Melon Mambo Ink.
  5. Remove the paper from the Stamparatus.
  6. Stamp the sentiment “Hi there, VALENTINE” on the inside panel of the Basic White cs card base.
  7. Adhere the Dandy Designs DSP to the front panel of the Basic White cs card base.
  8. Adhere the stamped cat card piece to the Flirty Flamingo cs.
  9. Adhere the Melon Mambo card piece to the front of the card.
  10. Use Stampin’ Dimensionals to adhere the Flirty Flamingo cs/stamped cat card piece to the card front.
  11. Add the Melon Mambo Opaque Adhesive-Backed Gems as desired. Bling!

Voila!

This is a simple and quick Valentine’s card! Be sure to look through the Stampin’ Up! 2023 January-April Mini Catalog and place your order starting today- January 5, 2023. Round up to the next $50 so you can choose a Sale-a-bration Reward for FREE! Sale-a-bration ends February 28,2023.

Host Code: MBR2U6TN

Order from my Online Store HERE.

Clickable Photographic Supply List

Product List
Stamparatus
[146276]
$49.00

Thanks so much for stopping by today. I hope you have a very nice day/evening! Stay safe and happy crafting!

Theresa

Posted in 2023 January-April Mini Catalog, Animals, Blending Brushes, Inspiration in Ink Blog Hop, Outdoors, Stampin' Write Marker

Inspirations in Ink Blog Hop January 2023- On the Farm Bundle Fun Fold

Welcome and thanks for visiting Theresa’s Treasures Paper Crafts! I am Theresa and I am a Stampin’ Up! Demonstrator in Arizona, USA. Today is the monthly Inspirations in Ink Blog Hop! I am excited to be hopping with awesome demonstrators from around the world. Be sure to check out everyone’s projects using the On the Farm Bundle or Dainty Delights Bundle. These will be available to purchase in the 2023 Jan-April Mini Catalog which is going live on January 5, 2023! On that day you may order form my Online Store HERE.

Today I am showcasing the On the Farm Bundle.

Measurements

  • Cherry Cobbler card stock(cs) card base: 4 1/4 x 11 inches scored and folded at 5 1/2 inches
  • Garden Green cs: 4 x 5 1/4 inches
  • Sahara Sand cs: 3 3/4 x 5 inches
  • Basic White cs: 4 x 5 1/4 (inside), 2 1/4 x 3 1/2 inches (to stamp the cow) and 3 x 4 1/4 inches (cut with the Scalloped Contours Dies)
  • New FREE Sale-a-bration Day at the Farm 12 x 12 inch Designer Series Paper(DSP)-chicken wire design: 2 x 5 inches (When you purchase the On the Farm Bundle January 5, 2023 you will be able to choose this DSP for FREE!)

Supplies

  • On the Farm Bundle
  • Scalloped Contours Dies
  • Early Espresso Faux Suede Ribbon: 6 inches
  • Enamel Dot Essentials (New)
  • Memento Black Ink
  • Balmy Blue Ink pad
  • Garden Green Ink Pad
  • Pear Pizzazz Ink pad
  • Stampin’ Write Markers in Garden Green, Cherry Cobbler, Soft Suede, Sahara Sand and Pear Pizzazz
  • Small Blending Brush (New)
  • Mini Glue Dots
  • Stampin’ Dimensionals
  • Multipurpose Liquid Glue

Instructions

  1. This is a pattern for the card base. You will flip it over and turn it so that the scored panel is on the left.

Making the Inside of the Card

2. Take out the 4 x 5 1/4 inch Basic White cs. Use the Balmy Blue Ink and the Small Blending Brush to apply ink to the lower right corner.

3. Stamp the grass in Garden Green ink leaving spaces. Use Pear Pizzazz Ink to fill in the spaces.

4. Take out the 2 1/4 x 3 1/2 inch Basic White cs. Use Memento Ink to stamp the cow.

5. Color in the cow’s spots with the Soft Suede Stampin’ Write Marker. Use the Sahara Sand Marker to make a shadow on the cow’s belly and back legs.

6. Use the On the Farm Dies to die cut the cow.

7. Use Stampin’ Dimensionals to adhere the cow to the Basic White cs panel. Adhere to the inside of the Cherry Cobbler cs. Note: this will be the side that is NOT scored.

Making the Outside of the Card

8. Adhere the Chicken Wire design from the Day at the Farm DSP to the bottom of the Sahara Sand cs.

9. Wrap the Early Espresso Faux Suede Ribbon around the front. Then adhere to the back with Mini Glue Dots. Adhere this card piece to the Garden Green cs. Set aside.

10. Die cut the 3 x 4 1/4 inch Basic White cs with the corresponding Scalloped Contours die. Use Memento Ink to stamp the barn on the Basic White cs. Stamp a second barn onto a full sticky paper (yellow). Fussy cut just inside the border. Adhere to the barn.

11. Stamp the silo next to the barn. Stamp a second silo on the full sticky paper. Fussy cut jsut inside the border. Adhere to the silo.

12. Now stamp the hills.

13. Stamp more hills. Add the trees and cloud. Remove the sticky note paper. Stamp the sentiment.

Coloring

1. Color the barn with the Cherry Cobbler Stampin’ Write Marker. I used a White Gel Pen to draw the barn doors.

2. Color the hills and trees with the Garden Green and Pear Pizzazz markers. The tree trunks are colored with the Soft Suede marker.

3. Use the Balmy Blue Ink and a Small Blending Brush (New) to gradually blend on the sky color.

4. Adhere the Scalloped Contours die cut to the card front with Stampin’ Dimensionals.

5. Adhere the Garden Green cs layer to the front of the card base by applying adhesive below the score line as shown. (Add the Enamel Dot Essentials as shown)

6. Tuck the front of the card base behind the cow on the inside as shown below.

Voila!

Thank you so much for visiting today! Please visit all the blogs in this hop. You will see all the fun and inspiring projects made by the Inspirations In Ink demonstrators. You are currently visiting Theresa McEntee-USA creator of Theresa’s Treasures Paper Crafts.

Deirdre Croal – USA   

Julie Golding – Canada   

Rebecca Nutley – Australia

Robbie Rubala – USA   

Theresa McEntee – USA  

Vicky Wright – Australia

Karen Gilbert Beck – Canada

Christy Gridley – USA  

Supply List

Product List

Be sure to make out your wish list now and shop my Online Store HERE on Thursday January 5, 2023!

Have a wonderful and safe day!

Theresa

Posted in 2023 January-April Mini Catalog, Designer Series Paper, Fish, Gratitude/ Thanks, Lake/Sea/Ocean, Nature, Outdoors, Sea, Sealife

Kylie Bertucci’s Top 10 International Blog Highlight Winners Hop: Stampin Up!® Sneak Peek- Seaside Bay Bundle Thank You card

Welcome! I am Theresa McEntee, creator of Theresa’s Treasures Paper Crafts. I am so excited and thankful to be part of the Top 10 Winners Hop from Kylie Bertucci’s International Blog Highlights Gallery! Thank you to everyone who voted for my card from December 2022 Peaceful Deer & Fabulous Frames! Your vote for that card is allowing me an opportunity to post on the Winners Hop today. Ten fabulous demonstrators from around the world will be posting today! The theme for the card today is “Thank you”

My card today is a Sneak Peek of the Seaside Bay Bundle and By the Bay Designer Series Paper. These products will be in the Stampin’ Up! 2023 January- April Mini Catalog. They will be available for purchase on January 5, 2023! You can order from my Online Store HERE. A complete supply list is at the end of the blog.

Measurements

  • Night of Navy card stock(cs) card base: 5 1/2 x 8 1/2 inches scored & folded at 4 1/4 inches
  • Balmy Blue Textured 12 x 12 inch Shimmer Paper: 4 x 5 1/4 inches (NEW)
  • Basic White cs: 4 x 5 1/4 inches (inside) and 1 1/2 x 3 inches (sentiment)
  • Gold Foil: 1 1/2 x 3 inches
  • By the Bay Designer Series Paper(DSP): Iridescent Navy Blue Shell design: 1 1/2 x 3 3/8 inches; Balmy Blue crab design: 1 1/8 x 2 1/4 inches; Multicolor sea shell design: 1 1/2 x 1 1/2 inches; and Gold fish circle design: 3 1/8 x 2 1/4 inches.

Supplies

  • Night of Navy Ink pad
  • Balmy Blue Ink pad
  • Sahara Sand Ink pad
  • Deckled Rectangles Dies
  • Balmy Blue & White 1/2 inch Variegated Ribbon: 15 inches and 7 1/2 inches (NEW)
  • Flat Adhesive-Backed Pearls (NEW)
  • Mini Glue Dots
  • Stampin’ Dimensionals & Mini Stampin’ Dimensionals
  • Multipurpose Liquid Glue

Instructions

Inside

1.Take out the 4 x 5 1/4 inch Basic White cs. Use Balmy Blue Ink to stamp with the sand & seashell stamp on the right-hand end. Then stamp the snail and conch shells in Sahara Sand Ink.

2. Adhere to the inside of the Night of Navy cs card base.

Front

3. Take out the Balmy Blue 12 x 12 inch Textured Shimmer Paper. Place the By the Bay DSP pieces on top. Then adhere them to the Textured Shimmer Paper with Tombow Liquid Glue.

4. Fold the 15 inch piece of Balmy Blue & White Variegated Ribbon in half. Wrap around the Textured Shimmer Paper. Adhere each end to the back of the paper with Mini Glue Dots.

5. Tie the 7 1/2 inch piece of ribbon around the right-hand side of the ribbon adhered to the Textured Shimmer Paper. Adjust and trim as desired.

Sentiment

6. Take the 1 1/2 x 3 inch Basic White cs out. First Stamp Off then stamp the sand & seashell stamp in Balmy Blue Ink. Stamp the Thank You sentiment in Night of Navy Ink.

7. Die cut the sentiment with the smallest Deckled Rectangle Die.

8. Use Stampin’ Dimensionals to adhere the sentiment over the ribbon on the left side of the card front.

Finish Up

9. Use the Tombow Multipurpose Liquid Glue to adhere the Textured Shimmer Paper to the front of the Night of Navy cs card base.

10. Die cut the scallop seashells from the Gold Foil. You will need one large and two small ones. Use Mini Stampin’ Dimensionals and the Tombow Glue to adhere around the sentiment as shown.

11. Add one Flat Adhesive-Backed Pearls inside each of the Gold Foil shells.

Voila!

Thank you so much for stopping by today! Have a wonderful day! You are at Theresa’s Treasures created by Theresa McEntee-USA. Please visit all the rest of the blogs in Kylie’s Top Ten Winners Blog Hop to see more fabulous creations!

To order in my Online Store click on any photo below.

Supplies

Product List

Bye for now!

Theresa

Posted in 2021-2022 Stampin' Up! Annual Catalog, 2022 July-December Mini Catalog, 2023 January-April Mini Catalog, flowers, Ink & Inspiration Blog Hop, Nature, Snow, Techniques

Winter into Spring for the Ink and Inspiration Blog Hop-December 2022

Hello fellow stampers! You are visiting with Theresa McEntee-author of Theresa’s Treasures Paper Crafts. I am hopping with the Ink & Inspiration Blog Hop today. There are several of us- you will find the list to follow the hop at the end of my blog post.

This is both an image and a color challenge. I was inspired by the zipper in the image, closing on winter to a very colorful image with clear skies. I came up with an idea for a Torn Paper Reveal card (also known as a Torn Paper Window or Rolled Torn Paper Reveal card) using some retiring stamps and some product to be released on January 5, 2023 in the Stampin’ Up! 2023 January-April Mini Catalog.

Details

The lovely snowy trees are from the Regal Reindeer stamp set. This stamp set is still available for another week or so in the 2022 July-Dec Mini Catalog. I found the bunny in the Peaceful Deer stamp set. This stamp set is available in the Annual Catalog until the end of April 2023.

Sneak Peek! The flowers of Spring are one of the designs in the Rain or Shine 12 x 12 inch Designer Series Paper. This can be found in the soon to be released 2023 January-April Mini Catalog!

I added extra Bling! to this card with the Rhinestone Basic Jewels and Wink of Stella. The Bling! on the flowers are the Iridescent Pastel Gems! Also a Sneak Peek!

More Inspiration

I hope my projects inspires you to create. You will see more amazing inspirations along the Ink & Inspiration Blog Hop today. Take a look at the list to see who is next-you are currently visiting Theresa McEntee-USA.

Order Supplies Here

Product List

Have a wonderful day!

Theresa

Posted in 2023 January-April Mini Catalog, Designer Series Paper, Gratitude/ Thanks

Kylie & Bruno Bertucci’s Demonstrator Training Program Blog Hop-December 2022- Sneak Peek-Two Tone Flora Thank You Card

Hello! Welcome to the Stampin’ Up! Demonstrator Training Blog Hop for December 2022. I’m Theresa with Theresa’s Treasures Paper Crafts. I am so glad you are joining me today! We are a group of Stampin’ Up! Demonstrators from around the world. We are taking part in training to help us build a successful Stampin’ Up! business. My goal is that I participate in the monthly Blog Hop. This blog hop is full of ideas and creative inspiration! Be sure to visit everyone’s blog by clicking on the links at the end of my blog.

This “Sneak Peek-Two Tone Flora Thank You Card” spotlights the Two-Tone Flora Bundle and the Something Fancy Bundle! These bundles will be in the 2023 Stampin’ Up! January-April Mini Catalog. You will be able to order HERE starting January 5, 2023! Saleabration will also be starting on January 5, 2023!

Measurements

  • Orchid Oasis card stock (cs) card base: 4 1/4 x 11 inches scored at 5 1/2 inches
  • Fancy Flora Designer Series Paper (DSP): 4 1/4 x 6 inches
  • Basic White cs: 3 x 3 inches for the sentiment and 4 x 5 1/4 inches for inside
  • Metallic Woven Ribbon 1/8 inch in Orchid Oasis: 8 inches

Supplies

  • Something Fancy stamp set
  • Two-Tone Flora Die
  • Orchid Oasis Ink
  • Stampin’ Cut & Emboss Machine
  • Mini Glue Dots
  • Multipurpose Liquid Glue
  • Stampin’ Dimensionals

Instructions

You are going to love this is a super simple & quick Thank You card!

  1. Cut the Fancy Flora DSP to 4 1/4 x 6 inches. Place the large floral die on the very edge of the right-hand and bottom edges. You will trim the excess off the top and left-hand edge later.
  2. I use a sticky note tape to hold the die in place.

3. TIP: Run the die through the Stampin’ Cut & Emboss Machine at a slight angle. The die will go through more smoothly.

4. Trim the excess off of the top & left-hand edges. Leave about a 1/8 inch border.

5. Use the Multipurpose Liquid Glue. Adhere the die cut to the front of the Orchid Oasis cs card base.

6. Use the “Thank You” sentiment from the Something Fancy stamp set. Stamp in Orchid Oasis Ink onto the 3 x 3 inch Basic White cs. Let dry.

7. The sentiment is cut with the hexagonal die from the Two-Tone Flora Die.

8. Place some Mini Glue Dots on the back of the sentiment. This will hold the 1/8 inch Metallic Ribbon in place. Then use Stampin’ Dimensionals to adhere it to the card front.

9. Add some Bling! with the Iridescent Pastel Gems.

Voila! You have a super simple and quick Thank You Note! Beautiful!

Remember to visit everyone’s blog. You will see creative inspiration from Demonstrators around the world! You are currently at Theresa McEntee-Theresa’s Treasures-USA. Enjoy!

I appreciate your visit to my blog today. Remember to sign up for my Theresa’s Treasures Paper Crafts Newsletter. You can click on the “Subscribe to my Newsletter” tab. Please subscribe to my blog as well. If you need any assistance with placing your order, let me know in the comments. Thanks!

I hope you are having a wonderful holiday season! Best wishes for an awesome New Year!

Theresa