Posted in Animals, Birthday, Masking Technique, Mini Catalog 2020

More Fun with Bonanza Buddies

The Birthday Bonanza Suite is just so much fun! I made another card I think you will enjoy. You will see how doable this is if you go step by step.

Sale-a-bration is going on until the end of March. If you purchase the Birthday Bonanza Suite, you can choose a free Sale-a-bration item! If you add on a package of Whisper White Card stock, 2 ink pads and a bottle of Tombow Multipurpose Liquid Glue, you can choose 2 free items!

Now to start to make this card!

Measurements: Whisper White card stock (CS): 11 x 4 1/4 inches scored at 5 1/2 inches, 5 x 3 3/4 inches and 4 x 2 inches; Birthday Bonanza Designer Series Paper (DSP): 5 3/8 x 4 1/8 inches and a 3 3/4 x 1 1/4 inch strip of the birthday candle design; and Bermuda Bay CS: 5 x 2 1/2 inches.

Stamp the koala bear in Smoky Slate ink onto the 4 x 2 inch Whisper White CS to the right. You will need your Stampin’ Pierce mat or a catalog to stamp on since this is a Photopolymer stamp.

Use the Memento ink to stamp the toucan and the eyes and nose for the koala.

Finish the toucan by stamping the beak in Mango Melody ink.

Fussy cut the koala and toucan with your paper snips. If you do have a Big Shot or other die cutting machine, use the Bonanza Dies.

Adhere the strip of birthday candles to the bottom of the 5 x 3 3/4 inch Whisper White CS. Position the 1 1/2 inch circle punch as shown to make the bottom port hole.

Position the same punch as shown to make the top port hole.

Continuing with the 1 1/2 inch circle punch, punch 2 circles from the Bermuda Bay CS leaving space around the circle.

Use the 1 3/4 inch circle punch to cut a rim around the smaller circle. This will create a piece to accent the “port holes”.

Tip: To apply the Tombow Multipurpose Liquid Glue to small pieces I use a set of tweezers. That way I do not get (too much) glue on my fingers. It is very easy to position the piece and lay it down without getting glue everywhere.

Now use the Coastal Cabana ink to stamp the sentiment “Happy Birthday” in the upper right corner. Also stamp the square present as shown leaving room to stamp other presents around it. Stamp a square present on a piece of sticky note. Tip: It is easiest to use a full sticky note. Stamp the bow for the square present in Bermuda Bay ink.

Fussy cut the present on the sticky note with your paper snips and use it to cover the present that is stamped on the card front. This is a mask for the Masking Technique.

Stamp the rectangular present in Calypso Coral partially over the masked present. Stamp another onto the sticky note paper. You will use this as a mask too. Stamp the bow for the rectangular present in Cajun Craze ink.

Fussy cut the rectangular present and apply it over the rectangular present on the card front.

Stamp the rectangular present again but turn it vertically. Use Mango Melody ink for the present and Coastal Cabana for the bow.

Remove all the masks. Now you have a pile of presents!

Fold the 8 1/2 x 4 1/4 inch Whisper White CS at the 5 1/2 inch score line and use the Bone Folder to make the fold crisp. Adhere the 5 3/8 x 4 1/8 inch piece of the Birthday Bonanza DSP to the card front.

Prepare to adhere the stamped port hole piece by applying Stampin’ Dimensionals to the back.

Adhere the stamped port hole piece to the card front.

Apply a Stampin’ Dimensional to the back of the head of the koala and toucan.

Apply adhesive to the feet of the koala and toucan and place them so they are peeking out of the port holes.

And Viola! You have an adorable birthday card with these cute animals again! See the post before the previous post for another card with the Bonanza Buddies Stamp set.

Thanks for visiting my blog. This blog is geared toward the beginner with an occasional more difficult card. This card would be a more difficult card since it requires more ink colors and uses the Masking Technique.

I hope you enjoyed this card. I had a fun time making it. Remember that during Sale-a-bration, which is until March 31, 2020, you may choose free product when you make a $50 or a $100 order. Today there are new products to choose from as well as the products that came out in the first release. Check out the details at my online store here.

Stampin’ Up Products used include: Stamp set: Bonanza Buddies #151567; Punch: 1 1/2 inch Circle #138299 and 1 3/4 inch Circle (I didn’t realize this one was retired, use the 2 inch Circle #133782 instead) Paper: Whisper White CS #100730, Bermuda Bay CS #131197, and the Birthday Bonanza DSP #151313; Ink: Smoky Slate #131202, Memento #132708, Mango Melody #146989, Bermuda Bay #131197, Coastal Cabana #131297, Calypso Coral #122925 and Cajun Craze #119684; Clear Blocks: A #118487, B #117147 and C #118486; Bone Folder #102300; Paper Snips #103579; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Stampin’ Dimensionals #104430; Stampin’ Pierce Mat #126199.

Posted in Animals, Birthday, Child's Birthday, Mini Catalog 2020, Photopolymer, Two-step stamping

Bonanza Buddies Birthday

My kids are all grown and I can remember each birthday. One theme was mermaids. Another was NASCAR. Each child sure had their own idea for the birthday party. It was loads of fun! The Birthday Bonanza Suite brings back memories of a circus birthday theme one of my kids had.

This is a lighthearted card made with the Bonanza Buddies Stamp Set from Stampin’ Up!. And making this card is really very simple.

Measurements: Whisper White Card stock (CS) 8 1/2 x 5 1/2 inches scored at 4 1/4 inches, 3 x 2 1/2 inches and 2 1/4 x 1 1/4 inches; Bermuda Bay CS 5 3/8 x 4 1/8 inches and 5 3/8 x 1 1/2 inches; Birthday Bonanza Designer Series Paper (DSP) 5 1/4 x 4 inches and
5 3/8 x 1 1/4 inches.

You will also need a piece of the Birthday Bonanza DSP with a toucan and balloons. Let’s get started!

Tip: The Bonanza Buddies is a Photopolymer stamp set so you will need the Stampin’ Pierce Mat to get the best image. Use Bermuda Bay ink to stamp the sentiment “Happy Birthday” onto the 2 1/4 x 1 1/4 inch piece of Whisper White CS.

The lion is a Two-Step Stamp. I tried stamping the mane first, then the lion’s body first and felt that it was easier to stamp the mane first. Use Mango Melody ink to stamp the lions mane and tail. Next use the Daffodil Delight ink to stamp the lion’s body by lining up the lions face with the mane and the tail with the tail tuft.

Use the Smoky Slate ink to stamp the koala bear. Next use the Memento ink to stamp the two different faces on to the respective animals.

Fussy cut the lion and koala bear. If you do have a Big Shot you can use the Bonanza Dies to cut the animals out.

Fussy cut the toucan and balloons from the Bonanza Birthday DSP.

Fold the 8 1/2 x 5 1/2 inch Whisper White CS on the 4 1/4 inch score line and use the Bone Folder to get a nice crisp fold. This is your card base.

Adhere the 5 3/8 x 4 1/8 inch Bermuda Bay CS to the front of the Whisper White card base.

Adhere the 5 3/8 x 1 1/4 inch Birthday Bonanza DSP to the 5 3/8 x 1 1/2 inch Bermuda Bay CS. Now adhere the strip to the card front as shown.

Trim the sentiment banner about 1/4 inch. Make a small cut in the center of the right side in preparation of cutting a banner edge.

Make a cut from the top corner to the end of the center cut. Do the same for the bottom corner. Viola! This is the easy way to make a centered banner end.

Apply Stampin’ Dimensionals to the back of the animals and the sentiment banner. Tip: To make the Dimensionals last longer, cut them in half.

Adhere the animals and the sentiment banner to the card front.

Viola! You are now ready to send off a cheery circus themed card to a special young one!

Thanks for joining me today for this wonderful birthday card. This set is so much fun! I will show another card I made with this stamp set at the end of the week. Please join me then.

This is the best time of year to order products from Stampin’ Up! because it is Sale-a-bration! That means for every $50 of product you order, you may choose from a Sale-a-bration Brochure and receive FREE PRODUCT! There are stamp sets, Designer Series Paper and even an embossing folder! Shop Now at my online store. Sale-a-bration is only until March 31st and products do run out. Both the Metallic Twine and Sequins and the Kerchief Card Kit are already gone! There is a second release which starts on March 4th so stay tuned. I am an Independent Stampin’ Up Demonstrator so if you need any assistance please email me at theresastreasures.az@gmail.com or send me a message on my Facebook page

Stampin’ Up! supplies used include: Stamp Set: Bonanza Buddies #151567; Paper: Whisper White CS #100730, Bermuda Bay CS #131197 and Birthday Bonanza DSP #151313; Ink: Bermuda Bay #147096, Mango Melody #147093, Daffodil Delight #147094, Smoky Slate #147113 and Memento #132708; Clear Blocks: A #118487 and C #118486; Bone Folder #102300; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Stampin’ Dimensionals #104430; Stampin’ Pierce Mat #126199 and Paper Snips #103579.