Posted in Animals, Birthday, Child's Birthday, Mini Catalog 2020, Photopolymer, Two-step stamping

Bonanza Buddies Birthday

My kids are all grown and I can remember each birthday. One theme was mermaids. Another was NASCAR. Each child sure had their own idea for the birthday party. It was loads of fun! The Birthday Bonanza Suite brings back memories of a circus birthday theme one of my kids had.

This is a lighthearted card made with the Bonanza Buddies Stamp Set from Stampin’ Up!. And making this card is really very simple.

Measurements: Whisper White Card stock (CS) 8 1/2 x 5 1/2 inches scored at 4 1/4 inches, 3 x 2 1/2 inches and 2 1/4 x 1 1/4 inches; Bermuda Bay CS 5 3/8 x 4 1/8 inches and 5 3/8 x 1 1/2 inches; Birthday Bonanza Designer Series Paper (DSP) 5 1/4 x 4 inches and
5 3/8 x 1 1/4 inches.

You will also need a piece of the Birthday Bonanza DSP with a toucan and balloons. Let’s get started!

Tip: The Bonanza Buddies is a Photopolymer stamp set so you will need the Stampin’ Pierce Mat to get the best image. Use Bermuda Bay ink to stamp the sentiment “Happy Birthday” onto the 2 1/4 x 1 1/4 inch piece of Whisper White CS.

The lion is a Two-Step Stamp. I tried stamping the mane first, then the lion’s body first and felt that it was easier to stamp the mane first. Use Mango Melody ink to stamp the lions mane and tail. Next use the Daffodil Delight ink to stamp the lion’s body by lining up the lions face with the mane and the tail with the tail tuft.

Use the Smoky Slate ink to stamp the koala bear. Next use the Memento ink to stamp the two different faces on to the respective animals.

Fussy cut the lion and koala bear. If you do have a Big Shot you can use the Bonanza Dies to cut the animals out.

Fussy cut the toucan and balloons from the Bonanza Birthday DSP.

Fold the 8 1/2 x 5 1/2 inch Whisper White CS on the 4 1/4 inch score line and use the Bone Folder to get a nice crisp fold. This is your card base.

Adhere the 5 3/8 x 4 1/8 inch Bermuda Bay CS to the front of the Whisper White card base.

Adhere the 5 3/8 x 1 1/4 inch Birthday Bonanza DSP to the 5 3/8 x 1 1/2 inch Bermuda Bay CS. Now adhere the strip to the card front as shown.

Trim the sentiment banner about 1/4 inch. Make a small cut in the center of the right side in preparation of cutting a banner edge.

Make a cut from the top corner to the end of the center cut. Do the same for the bottom corner. Viola! This is the easy way to make a centered banner end.

Apply Stampin’ Dimensionals to the back of the animals and the sentiment banner. Tip: To make the Dimensionals last longer, cut them in half.

Adhere the animals and the sentiment banner to the card front.

Viola! You are now ready to send off a cheery circus themed card to a special young one!

Thanks for joining me today for this wonderful birthday card. This set is so much fun! I will show another card I made with this stamp set at the end of the week. Please join me then.

This is the best time of year to order products from Stampin’ Up! because it is Sale-a-bration! That means for every $50 of product you order, you may choose from a Sale-a-bration Brochure and receive FREE PRODUCT! There are stamp sets, Designer Series Paper and even an embossing folder! Shop Now at my online store. Sale-a-bration is only until March 31st and products do run out. Both the Metallic Twine and Sequins and the Kerchief Card Kit are already gone! There is a second release which starts on March 4th so stay tuned. I am an Independent Stampin’ Up Demonstrator so if you need any assistance please email me at theresastreasures.az@gmail.com or send me a message on my Facebook page

Stampin’ Up! supplies used include: Stamp Set: Bonanza Buddies #151567; Paper: Whisper White CS #100730, Bermuda Bay CS #131197 and Birthday Bonanza DSP #151313; Ink: Bermuda Bay #147096, Mango Melody #147093, Daffodil Delight #147094, Smoky Slate #147113 and Memento #132708; Clear Blocks: A #118487 and C #118486; Bone Folder #102300; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Stampin’ Dimensionals #104430; Stampin’ Pierce Mat #126199 and Paper Snips #103579.

Posted in Butterfly, flowers, Friendship, Mini Catalog 2020, Multi-layer Stamping, Spring, Stamping-off technique

Sending Positive Thoughts

So much of life is just, well difficult. We all have our struggles. Sending a handmade card with positive thoughts can really make someone’s day and lift their spirits.

This card is very colorful, springy and sends a positive message. The colors are Mint Macaron, So Saffron, Balmy Blue and Highland Heather.

I used the Stampin’ Up! Positive Thoughts stamp set which is available in the 2020 Mini Catalog.

Measurements: Whisper White card stock (CS): 8 1/2 x 5 1/2 inches with a score at 4 1/4 inches, 5 x 3 3/4 inches and 4 x 2 inches; Garden Lane Designer Series Paper (DSP): 5 1/4 x 4 inches.

The technique I am going to show you today is Multi-layer Stamping. This is when you stamp several layers on top of each other. It is much easier than you would think!

Start with the main sentiment “Sending positive thoughts and feel good wishes” in Balmy Blue ink.

Use a scrap paper to stamp off before stamping the next image of this sentiment. Stamping Off is when you ink your stamp, stamp on the scrap paper, then stamp on your card front.

Do this several times, Stamping Off each time, until you reach the top of the card front. Do not worry if each line is not perfectly straight. It will not be that obvious once you add the rest of the images.

Use the Mint Macaron ink to stamp the leaf onto the card front. Stamp a second time without re-inking to the right of the first leaf. Mine is so light it is difficult to see in this photo.

Stamp the flowers in So Saffron ink at full strength.

Stamp three of the butterflies in Highland Heather ink onto the 4 x 2 inch Whisper White CS.

Cut out the butterflies with your paper snips. If you do happen to have a Big Shot or other die cutting machine, there are Natures Thoughts Dies available for this stamp set.

To make the butterflies pop off of the card, use the Bone Folder to bend the wings back a bit. Do this gently so you do not tear the wing off.

Use the Mini Stampin’ Dimensionals on the back of each butterfly.

Adhere the butterflies to the left upper side of the card front.

Fold the Whisper White CS 8 1/2 x 5 1/2 inch card base at the 4 1/4 inch score line and use the Bone Folder to make a crisp fold. Next, adhere the 5 1/4 x 4 inch Garden Lane DSP to the front panel of the Whisper White CS card base.

Adhere the stamped card front onto to the Garden Lane DSP layer.

And now for some Bling! I used the Wink of Stella Glitter Brush on the butterflies.

It is very hard to get a good photo of how sparkly this is. Try it and see for yourself!

And Viola! You now have a handmade card to send positive thoughts to someone to brighten their day!

Thank you again for joining me today. I hope you can find some creative time today and make something to spread some positive thoughts and kindness. We all need more kindness in today’s world! Be the change you want to see!

This is the best time of year to order products from Stampin’ Up! because it is Sale-a-bration! That means for every $50 of product you order, you may choose from a Sale-a-bration Brochure and receive FREE PRODUCT! There are stamp sets, Designer Series Paper and even an embossing folder! Shop Now at my online store. Sale-a-bration is only until March 31st and products do run out. The Metallic Twine and Sequins are already gone! I am an Independent Stampin’ Up Demonstrator so if you need any assistance please email me at theresastreasures.az@gmail.com or send me a message on my Facebook page

Stampin’ Up! supplies used include: Stamp Set: Positive Thoughts #151490; Paper: Whisper White CS #100730 and Garden Lane DSP #149488; Ink: Balmy Blue #146982, Mint Macaron #138337, So Saffron #105118 and Highland Heather #146986; Clear Blocks C #118486, D #118485, E #118484 and H #118490; Bone Folder #102300; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Mini Stampin’ Dimensionals #144108; and the Clear Wink of Stella Glitter Brush #141897.

Posted in #simplestamping, beginner stamper, flowers, Gratitude/ Thanks, Masking Technique, Mini Catalog 2020

Peaceful Poppies for Gratitude

Hello! I hope you all enjoyed a long weekend for President’s Day. My family and I went to the local Renaissance Festival and had a great time. I am so grateful for my family and for fun activities!

Because I try to practice gratitude, I am always in need of a thank you note. This one is very quick and simple!

This thank you card is made using the Stampin’ Up! Painted Poppies and the Peaceful Moments stamp sets which are available in the 2020 Mini Catalog. Items in this catalog are available until March 31, 2020 (unless they run out).

Measurements: Whisper White card stock (CS) 8 1/2 x 5 1/2 inches scored at 4 1/4 inches for the card base and 3 3/4 x 3 inches; and Basic Black CS 3 7/8 x 3 1/8 inches. Yes, only 3 pieces of paper!

First I used some sticky note tape to cover the bottom 1 1/2 inches of the 3 3/4 x 3 inch piece of Whisper White CS. This is a masking technique. You will need Memento ink.

Stamp the field of poppies onto the Whisper White CS. Let dry before removing the sticky note tape.

Use a ruler and the fine tip of the Stampin’ Write Basic Black marker to draw a line under the field of poppies.

Stamp the “Thank You” sentiment in the Memento ink in the center of the bottom half.

Use the Light and Dark Poppy Parade Stampin’ Blend alcohol markers to color the poppies.

Fold the 8 1/2 x 5 1/2 inch Whisper White card base at the 4 1/4 inch score line. Use the Bone Folder to make the fold nice and crisp.

Adhere the stamped card piece to the 3 7/8 x 3 1/8 inch Basic Black CS.

Add Stampin’ Dimensionals to the back of the Basic Black CS.

Adhere the Basic Black card piece to the Whisper White card base in the center of the front panel.

Now for some fun! The Whisper White 1/4 inch Crinkled Seam binding can be colored to any color with the Stampin’ Blend Alcohol Markers. I used the Dark Poppy Parade marker.

I just placed the ribbon on some scrap paper and colored it.

Tie a bow and adhere it to the card front with a Glue Dot.

Now for some Bling! The are Peaceful Poppy Sequins! Place a small dot of Tombow Multipurpose Liquid Glue where you would like to place the sequins. You could also try a Glue Dot.

And Viola! you have a really nice, simple and quick Thank You card!

Please leave me a comment and let me know how I am doing. Thank you for following my blog. I could not be successful without you!

This is the best time of year to order products from Stampin’ Up! because it is Sale-a-bration! That means for every $50 of product you order, you may choose from a Sale-a-bration Brochure and receive FREE PRODUCT! There are stamp sets, Designer Series Paper, sequins and twine and even an embossing folder! Shop Now at my online store. Sale-a-bration is only until March 31st and products do run out. If you need any assistance please email me at theresastreasures.az@gmail.com or send me a message on my Facebook page

Stampin’ Up! supplies used include: Stamp Set: Painted Poppies #151599 and Peaceful Moments #151595; Paper: Whisper White CS #100730, Basic Black #121045;
Ink: Memento #132708; Stampin Blends Alcohol Markers in Poppy Parade #147275; Stampin’ Write Marker in Basic Black #100082; Clear Blocks D #118485; Bone Folder #102300; Adhesives: Tombow Multipurpose Liquid Glue #110755, Glue Dots #104430 and Stampin’ Dimensionals #104430; Embellishments: Whisper White 1/4 inch Crinkled Seam Binding #151326 and Peaceful Poppies Sequins #151325.

Posted in Designer Series Paper, Love/Affection, Mini Catalog 2020, Photopolymer, Punch, Sale-A-Bration 2020, Valentine

Two Heartfelt Hearts

It’s Valentine’s week and it is not just for couples. This is a great time to let someone know just how much you love them.

These two Valentine’s Day cards are just wonderful for sharing your love. Today I will show you how to make the Two Hearts card.

This card is made with the Stampin’ Up! Heartfelt stamp set available in the 2020 Mini Catalog which you can view at my store.

Measurements: Whisper White Card stock (CS) 8 1/2 x 5 1/2 inches scored at 4 1/4 inches and 5 x 3 3/4 inches, Real Red CS 5 1/4 x 4 inches, From My Heart Designer Series Paper (DSP) 5 x 2 1/4 inches and a strip of the foil hearts from the From My Heart DSP.

Adhere the 5 x 2 1/4 inch From My Heart DSP to the bottom of the 5 x 3 3/4 inch Whisper White CS.

Tip: Since this stamp set is Photopolymer, use the Stampin’ Pierce mat to get the best image. Stamp the sentiment “Roses are red, Violets are blue” in Real Red ink onto the right side of the Whisper White CS portion, just above the border of the From My Heart DSP.

Use the Bone Folder to fold the 8 1/2 x 5 1/2 inch Whisper White CS at the 4 1/4 inch score line. This is your card base.

Stamp the sentiment “Being friends is better than eating candy (but let’s do that too)” on the inside of the Whisper White CS card base in Real Red ink.

Stamp a few heart doilies on the inside with Flirty Flamingo ink.

You can clean the extra ink off of the Stampin’ Pierce mat with a baby wipe or wet rag.

Punch out the foil hearts from the From My Heart DSP using the scalloped-edged heart punch from the Heart Punch Pack.

Adhere the stamped Whisper White card piece to the 5 1/4 x 4 inch Real Red CS.

Measure the Red Double-Stitched Satin Ribbon to be about 1 inch longer on each side of the card piece.

Use a Mini Glue Dot to adhere the ribbon to the card piece. Tip: The easiest way to get the glue dot onto the ribbon is to press the ribbon on top of the glue dot while it is on the roll.

I also put a glue dot in the center of the ribbon to hold it in place, then flip the card piece over and adhere the ribbon to the back side.

Adhere the card piece to the front of the Whisper White card base, making sure the inside sentiment is in the proper orientation.

Apply Stampin’ Dimensionals to the back of the Flirty Flamingo foil heart.

Tip: When you have used all the Dimensionals there is a border left behind. Cut into smaller pieces and use these as well.

Position the two foil hearts, then adhere the Real Red foil heart with Tombow Multipurpose Liquid Glue or Snail Adhesive.

Peel off the protective cover on the Stampin’ Dimensionals and adhere the Flirty Flamingo foil heart over the top of the Real Red foil heart.

Next you will need some Red Rhinestone Basic Jewels and the Take Your Pick tool to add some bling. (Sorry about the blurry photo of the rhinestones).

Use the pick end of the Take Your Pick tool to get under the adhesive of the rhinestone and move it into position on your card. Gently press on the rhinestone with your finger to secure it to the card and remove the pick.

I used three rhinestones.

And Viola! my fellow stampers! You have a wonderful card to send to share your love with someone special!

This is the best time of year to order products from Stampin’ Up! because it is Sale-a-bration! That means for every $50 of product you order, you may choose from a Sale-a-bration Brochure and receive FREE PRODUCT! There are stamp sets, Designer Series Paper, sequins and twine and even an embossing folder! Shop Now at my online store. If you need any assistance please email me at theresastreasures.az@gmail.com or send me a message on my facebook page

Stampin’ Up! supplies used include: Stamp Set: Heartfelt #151417; Punch: Heart Punch Pack #151292; Paper: Whisper White CS #100730, Real Red CS #102482 and the From My Heart DSP #151189; Ink: Real Red #147084 and Flirty Flamingo #147052; Clear Blocks C #118486 and H #118490; Bone Folder #102300; Take Your Pick tool #144107; Paper Snips #103579; Adhesives: Tombow Multipurpose Liquid Glue #110755, Mini Glue Dots #103683 and Stampin’ Dimensionals #104430; Embellishments: Real Red 3/8 inch Double-stitched satin ribbon #151115 and Red Rhinestone Basic Jewels #146924; and the Stampin’ Pierce Mat #126199.

Posted in beginner stamper, Designer Series Paper, flowers, Gratitude/ Thanks, Mini Catalog 2020, Sale-A-Bration 2020

Lovely Lily Pad Thank You

I just love to earn free stuff. During Stampin’ Up! Sale-a-bration, for every $50 you spend, you choose free stuff from the Sale-a-bration brochure. This card is made from the free Lovely Lily Pad stamp set and the Lily Impressions Designer Series Paper (DSP).

This is a really fun and colorful thank you card!

Measurements: Whisper White card stock (CS): 8 1/2 x 5 1/2 inch card base with a score at 4 1/4 inches, 5 1/4 x 4 inches and 2 7/8 x 2 7/8 inches; Grapefruit Grove CS: 5 3/8 x 4 1/8 inches and 3 x 3 inches; Bermuda Bay CS: 4 3/4 x 2 inches; Flirty Flamingo CS 3 x 2 1/2 inches; Granny Apple Green CS 3 x 1 1/2 inches; and Lily Impressions DSP 4 5/8 x 1 7/8 inches. Additional supplies: Flirty Flamingo, Granny Apple Green, and Memento ink, and Metallic Bakers Twine and Sequins Combo Pack.

The sentiment is from the Stampin’ Up! Peaceful Moments stamp set. Stamp the “Thank You” sentiment in Memento ink onto the bottom of the 2 7/8 x 2 7/8 inch piece of Whisper White CS. Tip: This is a red rubber stamp so you do get a good image when stamping on a flat surface.

Stamp the lily in Flirty Flamingo ink onto the 3 x 2 1/2 inch piece of Flirty Flamingo CS. Next, stamp the lily pad in Granny Apple Green ink onto the 3 x 1 1/2 piece of Granny Apple Green CS. Tip: To get the best image with a see through Photopolymer stamp, use the Stampin’ Pierce Mat or your catalog. I cover my Pierce Mat with white copy paper so that the ink goes on the paper and not the Mat.

Cut out the lily and the lily pad with your Paper Snips. (If you do have a Big Shot, there are Lily Pad Dies you could use). Adhere the lily pad onto the Whisper White CS piece just over the “Thank You” sentiment. I use Tombow Multipurpose Liquid Glue.

Apply Stampin’ Dimensionals to the back of the lily.

Adhere the lily just over the lily pad. Now adhere the whole piece to the 3 x 3 inch piece of Grapefruit Grove CS.

Adhere the 4 5/8 x 1 7/8 inch piece of Lily Impressions DSP to the 4 3/4 x 2 inch piece of Bermuda Bay CS.

Wrap the Bermuda Bay colored Metallic Bakers Twine around the card piece 2 times, then tie a bow.

Fold the 8 1/2 x 5 1/2 inch Whisper White CS at the 4 1/4 inch scoreline and run the Bone Folder over it so it is a nice, crisp fold.

Adhere the 5 1/4 x 4 inch piece of Whisper White CS to the 5 3/8 x 4 1/8 inch Grapefruit Grove CS. Then adhere the piece to the front of the Whisper White card base.

Adhere the Bermuda Bay and Lily Impressions DSP piece to the card front.

Apply Stampin’ Dimensionals to the back of the piece with the lily and lily pad on it.
Tip: I get the corner pieces from cutting up the leftover outside edge of the Stampin’ Dimensionals.

Adhere the lily and pad piece to the card front above the bow.

Now for the Bling! Apply the Tombow Multipurpose Liquid Glue to the area you would like to place the sequins.

The Take Your Pick tool is an easy way to pick up a sequin and place it on the glue.

Easy peasy!

And Viola! you have made a colorful Thank You card!

Thank you for joining me today! I just love making cards and sharing the instructions. Many cards look complicated but they really aren’t if you go step by step. I hope you take time to create something for yourself soon. I feel a lot of joy when I take time to design and make new cards! I wish joy for you too!

I am an Independent Stampin’ Up! Demonstrator and can help you order supplies to be able to make great cards. Visit my store at: https://www.stampinup.com/ecweb?dbwsdemoid=2163434. Email me at theresastreaures.az@gmail.com, or private message me on Facebook Thank you so much for your business.

Stampin’ Up! Supplies used include: Stamp Set: Lovely Lily Pad #152288 and Peaceful Moments #151595; Paper: Whisper White CS #100730, Grapefruit Grove CS #146972, Bermuda Bay CS #131197, Flirty Flamingo CS #141416, Granny Apple Green CS #146990 and Lily Impressions DSP #152284; Ink: Memento #132708, Flirty Flamingo #147052 and Granny Apple Green #147095; Clear Blocks: C #118486, D #118485 and H #118490; Bone Folder #102300; Take Your Pick Tool #144107; Paper Snips #103579; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Stampin’ Dimensionals #104430; Embellishments: Metallic Baker’s Twine and Sequins Combo Pack #152314.

Posted in #simplestamping, beginner stamper, Friendship, Love/Affection, Mini Catalog 2020

Parisian Blossoms -Love is in the Air

Hello! Hope your day is going better than mine. I am having technical difficulties today, but I believe I have everything worked out.

This is a very simple card that was inspired by a swap I received from my friend Jeanne. I just love the pastel colors and the sparkly ribbon.

The Parisian Beauty stamp set is in the Stampin’ Up! 2020 Mini-Catalog. It is part of the Parisian Blossoms Suite that includes matching Parisian Blossoms Designer Series Paper, Petal Pink Metallic Edged Ribbon and Champagne Rhinestones (as well as a Parisian Flourish Embossing Folder and Parisian Dies).

Measurements: Whisper White Cardstock (CS) Card base 81/2 x 51/2 inches scored at 4 1/4 inches and 5 3/8 x 2 1/2 inches; Petal Pink CS 5 3/8 x 4 1/8 inches; Basic Black CS 5 3/8 x 1 inches (you need two); and Designer Series Paper (DSP) 4 1/4 x 1 inches (you need two). I did not have the Parisian Blossoms DSP so I used the Bird Ballad DSP from the Annual Catalog.

Use Smoky Slate Ink to stamp the Eiffel Tower onto the 5 3/8 x 2 1/2 inch piece of Whisper White CS. Stamp the Eiffel Tower near the top to allow room for the sentiment and ribbon.

Stamp the sentiment “You’re the joy of my life” in Smoky Slate ink on the very bottom of the panel to allow room for the ribbon.

Whenever I use the Tombow Multipurpose Glue I use the Silicon Craft mat to help keep the glue off of my table. Adhere the two Basic Black 1 inch strips to the back of the Eiffel Tower panel.

Tie a bow around the bottom.

Apply Stampin’ Dimensionals to the back of the Eiffel Tower panel. I cut the Dimensionals in half to make them last longer. Set the card piece aside.

Use the Bone Folder to fold the Whisper White CS card base at the 4 1/4 inch score line. Adhere the 5 3/8 x 4 1/8 inch Petal Pink card piece to the front of the card base.

Adhere the 4 1/2 x 1 inch DSP panels to the Petal Pink card piece as shown.

Peel off the backs of the Stampin’ Dimensionals and adhere to the card front, lining the Eiffel Tower panel up with the Petal Pink panel.

And Viola! you have a fun card to express your love to a special someone!

This is the best time of year to order products from Stampin’ Up! because it is Sale-a-bration! That means for every $50 of product you order, you may choose from a Sale-a-bration Brochure and receive FREE PRODUCT! There are stamp sets, Designer Series Paper, sequins and twine and even an embossing folder! Go to my website at https://theresastreasures.stampinup.net/ and select the Shop Now button to reach my online store. If you need any assistance please email me at theresastreasures.az@gmail.com.

Stampin’ Up! Products used include: Stamp Set: Parisian Beauty #151466; Paper: Cardstock: Whisper White #100730, Petal Pink #146985 and Basic Black #121045, Designer Series Paper: Bird Ballad #149592; Ink: Smoky Slate #147113; Clear Blocks:
C #118486 and E #118484; Bone Folder: #102300; Silicon Craft Mat #127853; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Stampin’ Dimensionals #104430; Embellishments: Petal Pink 1/4 inch Metallic Edge Ribbon #151194.

Posted in #simplestamping, 3D Technique, beginner stamper, flowers, Mini Catalog 2020, Punch

Quick Timeless Tulips Note Cards and Tips

Hello fellow stampers. Sometimes I need to replenish my supply of cards that can be used for a variety of occasions. I like a quick and simple card for this purpose.

These cards are fun and quick to make. I made several different colors in no time!

I loved making these tulip cards so much I made a lot! I figured I could use them for Sympathy, Get Well, Birthday and Thank you cards.

The card I am going to demonstrate today is the one in the Stampin’ Up! color Daffodil Delight.

The stamp set is the Stampin’ Up! Timeless Tulips.

Measurements: Whisper White Card stock: 8 1/2 x 5 1/2 inches scored at 4 1/4 inches and 5 x 3 3/4 inches: Daffodil Delight Card stock: 5 1/4 x 4 inches.

The tulip stamp looks better if the ink is not too wet. Tip: Use the Bone Folder to move the ink to the side.

Stamp the largest tulip in the center, then add the smaller tulips. Leave some space between the tulips so that you have room for the leaves.

Tip: In order to keep the stem stamp in the right configuration, I laid it on the Pierce Mat and then picked it up with the block instead of trying to place it on the block. Use this stamp to stamp a stem for the tulip on the right.

Tip: Another way to make sure the stamp is going to stamp a good image, is to put it where you are going to want the image to be, then use the block to pick it up.

Stamp the stem for the middle tulip and the bud on the left.

Now gradually add the leaves. Tip: An odd number of leaves will be more pleasing to the eye than an even number. I added two of the fatter leaf and two of the skinny leaf.

I then added the other skinny leaf to make an odd number of leaves.

Adhere the stamped tulip piece to the 5 1/4 x 4 inch piece of Daffodil Delight cardstock. Adhere this card piece to the front of the Whisper White card stock card base.

And Viola! you have a note card to use in just about any situation that may arise!

This is a very basic card. You can dress it up a little if you wish.

You can add a sentiment.

You can use the Tulip Builder Punch to make the card 3-D.

Lastly you can always add some Bling! I used the Champagne Rhinestone Basic Jewels.

I hope you enjoyed this card. If you would like to make one for yourself, visit my store. The products are listed below. The stamp set is in the new 2020 Mini Catalog.

Shop here: https://theresastreasures.stampinup.net/

Stampin’ Up! products used: Stamp Set: Timeless Tulips #151534*; Punch: Tulip Builder # 151295*; Paper: Whisper White #100730 and Daffodil Delight #119683; Ink: Daffodil Delight #147094, Granny Apple Green #147095 and Memento Black #132708; Clear Blocks: B #117147, C #118486, D #118485 and H #118490; Bone Folder #102300; Adhesives: Tombow Multipurpose Liquid Glue #110755 and Stampin’ Dimensionals #104430; Champagne Basic Rhinestone Jewels #151193. *The stamp set and punch come together in a bundle for a savings of 10% : Timeless Tulips Bundle #153793.

I hope you have a great day and do something creative!

Posted in beginner stamper, flowers, Gratitude/ Thanks, Mini Catalog 2020

Thank You Tag card

In the aftermath of Christmas, there are many thank yous to be written. The following is a slightly different type of card. I hope you like it!

This card is made using the new Stampin’ Up! Honey Bee stamp set and the free Golden Honey Specialty Designer Series paper (DSP). These products will be available on January 3, 2020 from the Mini Catalog. See more about getting the free paper at the end of the card instructions.

This stamp set is so cute!

I also used the Healing Hugs stamp set that is available in the 2019-2020 Annual Catalog.

Measurements: Whisper White cardstock 5 1/2 x 4 1/4 inch card base, 5 x 3 3/4 inches and 3 3/4 x 2 1/2 inches; Bermuda Bay cardstock 5 1/4 x 4 inches; Pineapple Punch cardstock 4 x 2 3/4 inches and 1 1/2 x 3 inches; Golden Honey Specialty DSP two of 3 3/4 x 3 inches.

Using Memento ink, stamp the small honey bee onto the 1 1/2 x 3 inch piece of Pineapple Punch cardstock. Set aside.

Using Pineapple Punch ink, stamp the rose from the Healing Hugs stamp set onto the top of the 3 3/4 x 2 1/2 inch piece of Whisper White cardstock.

I did not like the way the rose stamped on the first try because the detail was not as obvious as I would like. The Healing Hugs stamps are Distinctive. This means they are more like a photo. Tip: Sometimes the image looks better when the ink pad is not so wet. You can use the bone folder to temporarily move the ink to the side. The image has more detail when stamped this way. (I just flipped the paper over to re-stamp the image).

Use the Memento ink to stamp the “Thank You” sentiment just under the Pineapple Punch rose. The sentiment is from the Love What You Do stamp set in the 2019-2020 Annual Catalog.

You will need to cut the two pieces of the Golden Honey DSP as shown.

You will be using the two pieces on the bottom.

Adhere the 5 1/4 x 4 inch piece of Bermuda Bay cardstock to the 5 1/2 x 4 1/4 inch piece of Whisper White cardstock.

Apply adhesive only to the square edge of the Golden Honey DSP piece and adhere to the 5 x 3 3/4 inch piece of Whisper White so that the triangles overlap in front and make a pocket.

Adhere the stamped rose and sentiment piece to the 4 x 2 3/4 inch piece of Pineapple Punch cardstock.

Slide the tag into the pocket as shown.

Fussy cut the honey bee with your Paper Snips.

Apply a Stampin’ Dimensional to the back of the honey bee.

Adhere the honey bee to the rose.

Make a bow with the 1/4 inch Mini Striped Ribbon in Bermuda Bay. Adhere to the card with a glue dot.

And Viola! you have a really cute thank you note. I hope you enjoy your New Year’s Eve. Stay safe! See you next year!

How to get free stuff. Stampin’ Up! has a promotion called Saleabration from January 3, 2020 until March 31, 2020. During this time, for every $50 you order, you can choose a product from the Saleabration Brochure. The free product I used today is the Golden Honey Specialty DSP. There are also stamp sets, embellishments and framelits to choose from. You may order from the 2019-2020 Annual Catalog or (starting January 3, 2020) you may order from the Mini Catalog. If you would like a paper catalog, please let me know via email at theresastreasures.az@gmail.com.

Stampin’ Up! products used included: Stamp Sets: Honey Bee #151527, Healing Hugs #148223 and Love What You Do #148042; Paper: Cardstock: Whisper White #100730, Bermuda Bay #131197 and Pineapple Punch #146971; Golden Honey Specialty Designer Series Paper #152311; Ink: Memento #132708 and Pineapple Punch #147141; Adhesives: Tombow Multipurpose Liquid Glue #110755, Glue Dots #103683 and Stampin’ Dimensionals #104430; Ribbon: 1/4 inch Mini Striped Ribbon in Bermuda Bay #146939; Clear Blocks: A #118487 and D #118485; and Paper snips #103579.