Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Fun/Fancy fold card, Gratitude/ Thanks, Sponge Dauber

Gather Together for Friday’s Fun Fold

The Gather Together stamp set in the 2020 Stampin’ Up! Mini Catalog is so versatile. Today’s Fun Fold is yet another way to use the set for a nice Autumn card.

I saw this Fun Fold on a YouTube from Karen Titus. Her card was a Christmas one, but I wanted to make a Thanksgiving-style card. The large sentiments are from the Ornate Thanks stamp set in the 2020-21 Stampin’ Up! Annual Catalog. If you plan on making a lot of thank you cards, getting the Ornate Thanks set is the way to go!

A Technique I will be sharing today is Sponging with the Sponge Dauber. Sponging is how I was able to add some color to the leaves and pumpkins!

Measurements: Very Vanilla Card Stock (CS): 4 1/4 x 11 inches with a score line at 5 1/2 inches, two at 2 1/2 x 4 1/4 inches, 1 3/4 x 4 inches, 1 3/4 x 3 inches and 3 x 6 inches; Cajun Craze CS: two at 2 3/4 x 4 1/2 inches; and Gilded Autumn Designer Series Paper: two at 3/4 x 4 inches.

Usually we stamp first. But for today’s card, se have to do a little cutting. Cut 1 inch past the 5 1/2 inch score line on the 4 1/4 x 11 inch Very Vanilla CS, then cut 1 inch off the bottom of the piece you just cut off.

Lay the 1 x 4 1/4 inch Very Vanilla piece on the bottom of the back of the card front, and make a pencil mark near the upper border. Make a pencil mark on the bottom border of the piece that folds down. The two pencil marks on each side will guide you where to stamp.

Use the Terracotta Tile ink and the sentiments from the Ornate Thanks stamp set to stamp between the pencil marks and along the side borders. Remember to use the Stampin’ Pierce Mat or a catalog to stamp on when stamping with the Photopolymer Stamps.

Use the Terracotta Tile ink to stamp the sentiment “May this season bring you smiles…” in the center of one of the 2 1/2 x 4 1/4 inch Very Vanilla CS. Stamp the wheat on the bottom. Both of these stamps are in the Gather Together stamp set.

Also from the Gather Together stamp set is the sentiment “Gather Together” which you will stamp in Cajun Craze ink onto the 1 3/4 x 4 inch Very Vanilla CS. Punch the sentiment out with the Label Me Fancy Punch.

Using the Cajun Craze ink, stamp the two different pumpkin stamps onto the 1 3/4 x 3 inch Very Vanilla CS. Stamp two of the Maple Leaves in Cajun Craze ink onto the 3 x 6 inch Very Vanilla CS.

Technique: to use the Sponge Dauber, gently tap the white foam tip onto the Cajun Craze ink. Rub the ink off in small circles onto a scrap paper. Apply a light layer to the Maple Leaf.

Gradually add more ink until you are satisfied with the look. Follow the same procedure for coloring the pumpkins.

Fussy cut the leaves and pumpkins with your Paper Snips, or if you have the Stampin’ Cut & Emboss Machine along with the Gathered Leaves Dies, you can cut the leaves and pumpkins out that way.

Adhere the inner sentiment and wheat sheaf to one of the 2 3/4 x 4 1/2 inch Cajun Craze CS card pieces.

Lay the two Maple leaves and the pumpkins, along with the “Gather Together” sentiment in place on the other 2 3/4 x 4 1/2 Cajun Craze CS card pieces. Adhere the two Maple leaves and the large pumpkin with adhesive.

Use Stampin’ Dimensionals to adhere the sentiment and the pair of small pumpkins.

Adhere the inside panel to the inside of the Very Vanilla CS card base.

Adhere the 3/4 x 4 inch strips of Gilded Autumn Specialty DSP to the Very Vanilla CS strips on the upper and lower border of the card front.

Apply adhesive to the upper and lower edges of the “Gather Together” sentiment piece and adhere it to the card front as shown.

Viola! You have an amazing Autumn Fun Fold to share how grateful you are!

Thanks again for joining me on this Fun Fold Friday! Please leave a comment. I would love to hear from you.

If you need any of the following products, just click on the photo and you will go directly to my online store.

Product List

Happy Crafting!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Punch, Punch Art, Winter Holiday

Stampin’ Up!® Perfectly Plaid Christmas Card

Hello! Happy November! I can’t believe how fast this year is going for me! I am showing a Christmas card today because I am worried I will not be able to create and send all of my Christmas cards on time. It is good to get started early. However, I am not forgetting Thanksgiving. I plan to do a few Thanksgiving cards in the blogs over the next few weeks.

This is a fun and simple Christmas card using the Perfectly Plaid stamp set, the Pine Tree Punch and the ‘Tis The Season Designer Series Paper (DSP). You will find the Perfectly Plaid stamp set and Pine Tree Punch in the 2020-21 Stampin’ Up! Annual Catalog. The ‘Tis The Season DSP is in the 2020 Stampin’ Up! August-December Mini Catalog. Let’s get started!

Measurements: Whisper White Card Stock (CS): 4 1/4 x 11 inches with a score line at 5 1/2 inches and 2 1/4 x 4 inches; Real Red CS: 4 x 5 1/4 inches; and ‘Tis The Season DSP 2 x 5 1/4 inches and 4 different designs at 2 1/4 ix 6 inches.

Using Garden Green ink, stamp the sentiment “Merry Christmas” on the 2 1/4 x 4 inch Whisper White CS leaving space around the sentiment so you can punch it out. Stamp the sentiment “Hoping that your busy year…” on the inside of the 4 1/4 x 11 inch Whisper White CS card base.

Use the Everyday Label Punch to punch out the sentiment “Merry Christmas”. Set aside.

Get together the Pine Tree Punch and the 4 ‘Tis The Season DSP strips that measure 2 1/4 x 6 inches.

Punch out one Pine Tree from each strip of ‘Tis The Season DSP.

Adhere the 2 x 5 1/4 inch strip of the ‘Tis The Season DSP to the 4 x 5 1/4 inch Real Red CS. Fold the 4 1/4 x 11 inch Whisper White CS card base at the 5 1/2 inch score line and use the Bone Folder to make the fold crisp. Adhere the Real Red/DSP card piece to the front of the Whisper White CS card base.

Position all of the Pine Trees and the sentiment on the card front. Adhere two of the Pine Trees flat.

Adhere the third Pine Tree and the sentiment with Stampin’ Dimensionals.

Adhere the fourth Pine Tree to the inside of the card.

Now for the Bling! The Champagne Rhinestone Basic Jewels and the Star Designer Elements can both be found in the 2020-2021 Stampin’ Up! Annual Catalog.

Place a star over each tree and then scatter the Champagne Rhinestone Basic Jewels.

Viola! You have a fun and simple Christmas card!

Thank you so much for stopping by today. Announcements: Be sure to order from the Stampin’ Up! August-December Mini Catalog as soon as possible. Some items will sell out, and once they are on backorder you may not get them before Christmas. Consider purchasing a stamp kit as a gift. There are all inclusive kits in both the Annual and Mini Catalogs. If you would like a paper catalog, shoot me an email at: theresastreasures.az@gmail.com.

To get to my online store, click on any one of the photos below.

Product List

Have a wonderfully creative week!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Avid Stamper, Gratitude/ Thanks, Stampin" Blends Alcohol Markers

Kylie’s Monthly International Blog Highlights Gallery- November 2020-Stampin’ Up!®-Country Home and Beautiful Autumn Thank You

Thank you for stopping by Theresa’s Treasures today. I am Theresa and I am a Stampin’ Up!® Demonstrator in Arizona, USA. Today I am taking part in Kylie Bertucci’s Monthly International Blog Highlights Gallery. The theme is- Thank You. On this gallery, you can see thank you cards made by folks from all over the world! My thank you card was so much fun to make! I hope you enjoy it. Please remember to visit the Highlights Gallery and vote for me! Thank you!

For this card I used the milk can and floral arrangement from the Country Home stamp set in the 2020-21 Stampin’ Up! Annual Catalog. The oak and maple leaves are from the Beautiful Autumn stamp set in the 2020 Stampin’ Up! August-December Mini Catalog. The pumpkin and squash were cut from the Gilded Autumn Specialty Designer Series Paper also in the Mini Catalog. Yes-I did a lot of fussy cutting!

I used the Gold Hoop Embellishment to make a sort of wreath for the arrangement. The sentiment is from the Beautiful Autumn stamp set. The background is the Brushed Metallic card stock embossed with the Tin Tile 3D embossing folder. I also used a bit of the Plaid Tidings Designer Series Paper.

Viola! After much fussy cutting and arranging, trimming here and there, I settled on this arrangement for this card. Remember to say thank you often as it is always nice to be appreciated.

Please stop by the International Blog Highlights Gallery and see all the awesome Thank You cards from all over the world!

Theresa

Product List
Posted in 2020-2021 Stampin' Up! Catalog, Designer Series Paper, Gratitude/ Thanks, Uncategorized

Stampin’ Up! Artistry Blooms Thank You Card

Since saying “Thank You” to others is such an important gesture I decided to break from the Halloween and Fall cards to make a fun Thank You card that uses the Artistry Blooms Designer Series Paper (DSP). Artistry Blooms is one of the many Designer Series Papers currently available for 15% off. More on that below.

I just love the Artistry Blooms DSP because of all the bright colors and abstract patterns.

Measurements: Whisper White Card Stock (CS): 4 1/4 x 11 inches with a score line at 5 1/2 inches and 2 x 4 inches; Mango Melody CS: 3 x 5 inches; Magenta Madness CS: 2 x 4 1/4 inches; Artistry Blooms DSP: 2 3/4 x 4 3/4 inches and 1 3/4 x 4 inches.

Peaceful Moments is a really great sentiment stamp set for the beginner. It has most of the major categories included: Happy Birthday, Congratulations, Sympathy, and Thank you.

Using Magenta Madness ink, stamp the sentiment “Thank You” onto the 2 x 4 inch Whisper White CS. Punch the sentiment out with the Timeless Label Punch. Believe it or not, that is it for the stamping.

Adhere the 2 3/4 x 4 3/4 inches Artistry Blooms DSP to the 3 x 5 inches Mango Melody CS. Then adhere the 1 3/4 x 4 inch Artistry Blooms DSP to the 2 x 4 1/4 inch Magenta Madness CS.

Fold the 4 1/4 x 11 inch Whisper White CS at the 5 1/2 inch score line and use the Bone Folder to make a crisp fold. Adhere the Mango Melody CS and DSP card piece to the left side of the card front. I try to leave a white border on the left side, the top and the bottom that are roughly equal, about 1/4 inch. Add the Magenta Madness CS and DSP card piece so that the right white border is the same as the left white border.

Use the Stampin’ Dimensionals to adhere the sentiment “Thank You” to the card front. This card is perfectly fine the way it is. However, I wanted to add some butterflies and Bling! to dress the card up a bit.

I cut a 2 inch strip of the Artistry Blooms DSP in a pattern that would show up against the two patterns already on the card. I punched out one large and two small butterflies with the Butterfly Duet Punch.

I used the Bone Folder to curl the ends of the butterfly’s wings.

I put them on the card and moved them around until I felt I had a nice balance.

Now for the Bling! I used the 2020-2022 In Color Enamel Dots in the Magenta Madness and Bumble Bee colors in the center of the butterflies.

Viola! You have a colorful thank you card to send off! A card that expresses gratitude is really beneficial not only to the recipient of the card but also to the sender. I think if the card is made by the sender, the sender benefits even more! Good feelings all around!

Thanks so much for stopping by my blog today. I really enjoy hearing your comments, so let me know what you think. Also, please like my post. Thank you!

Here is more on the Designer Series Paper Sale:

Product List

Have a wonderful and creative day!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Avid Stamper, Gratitude/ Thanks, Sponging technique, Stampin" Blends Alcohol Markers

International Blog Highlight Winners Hop October- Country Home

I am so excited and thankful to be part of the Top 10 Winners Hop from Kylie Bertucci’s International Blog Highlight! Thank you to everyone who voted for my card from October’s International Blog Highlight, allowing me another opportunity to post on the Winners Hop. Ten Demonstrators from around the world will be posting today. The theme today is Thanks.

I created this card using several techniques including masking and sponging. I have fallen in love with all you can do with the Stampin’ Blend Alcohol Markers and the Country Home stamp set. Additional texture was added with the use of the Textured Essentials stamp set. I continued the background design on the right of the inside.

By sponging, I blended Misty Moonlight and Cajun Craze inks together to create the background. The sentiment and blotches are in Early Espresso ink. The Stampin’ Blends colors are: Misty Moonlight, Gray Granite, Smoky Slate, Just Jade, Calypso Coral, Poppy Parade and Crumb Cake.

I hope you enjoyed my card. I am very thankful for all the good things; sometimes they are difficult to see, but there are many good things and good people out there.

Thank you for stopping by today!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Emboss Powder, Halloween, Punch Art

Stampin’ Up!® Ghostly Halloween Greetings and the Emboss Powder Technique

Hello everyone! It is good to be back home after my road trip to Kentucky. I had a wonderful time visiting my son who is in the Army. I am anxious to start stamping and making cards again!

I have a fun and spooky Punch Art Style card for you today. Punch Art consists of card designs made entirely by using different punches to make images. This is a very simple Punch Art card, where I just turned the Tulip Punch upside down to create the ghost shape. The Halloween stamp set is Hallows Night Magic in the Stampin’ Up! 2020 August-December Mini Catalog. The faces and bows were from the Hippo Happiness stamp set found in the 2020-21 Stampin’ Up! Annual Catalog. I will also go over using Emboss Powder to make the white sentiment on the Basic Black card stock.

Measurements: Basic Black Card Stock (CS): 4 1/4 x 11 inches with a score line at 5 1/2 inches and 3/4 x 4 1/8 inches; Whisper White CS: 4 x 5 1/4 inches (inside) and 2 1/4 x 4 1/2 inches; the black bat design in the Magic In This Night Designer Series Paper (DSP): 4 1/8 x 5 3/8 inches.

Additional supplies: Memento Black ink, Versamark ink, White Stampin’ Emboss Powder and Rhinestone Basic Jewels.

Embossing Supplies Here are the supplies I keep handy when I want to use Emboss Powder. I keep everything in a bag so that when I want to use it, it is all together. Pictured: Versamark ink, Embossing Buddy, White Emboss Powder, spoon, small paint brush and a microfiber cloth. Note: Stampin’ Up! is not currently selling the Embossing Buddy but there are several you can find online, or you can make your own with some tightknit fabric and cornstarch. I have seen instructions for the homemade version online as well.

In order to prepare the 3/4 x 4 1/8 inch Basic Black CS strip for embossing, it is very important to use the Embossing Buddy first to decrease the static and absorb oils from your skin that may be on the paper. Just move the Embossing Buddy firmly from left to right 2 or 3 times. There will be a white residue left behind that we will remove later. Use the Versamark ink and the sentiment “Happy Halloween” to stamp onto the Basic Black CS.

Take care not to touch the stamped sentiment. Hold onto one end of the strip and use the spoon to sprinkle a good amount of the White Emboss Powder onto it. Shake the excess off. Use the paintbrush to remove any of the Emboss Powder that is in the wrong place. Tip: I put my emboss powders in a plastic container because I find it much easier to use than trying to keep the powder in the little jar it comes in. This container has 3 jars of the White Emboss powder in it.

Hold onto one end and use the Heat Tool to apply an even flow of heated air to the Emboss Powder. I move my Heat Tool back and forth to avoid concentrating the heat in one spot and burning the paper. You will suddenly see that the Emboss Powder becomes a bright white and is shiny. Tip: Hold the strip up to a light and ensure that the entire sentiment is white and shiny. If it is still a little dull, apply more heat to that spot.

Allow the Embossed sentiment to cool completely for about 10 minutes, then gently use the microfiber cloth to remove the white residue. Set this aside for the time being.

Lay the 4 x 5 1/4 inch Whisper White CS in a landscape orientation. Use the Memento Black ink to stamp the sentiment “Trick-or-Treat” in the center of the bottom. Turn the card piece to a vertical orientation. Use the Memento to stamp the spider crawling along the side. Set aside.

I usually recommend stamping before cutting. However, I felt it was easier to put the ghost’s faces on after I punched them out. Punch one from each end first, then punch the one in the middle.

Use the Memento ink and the face from the Hippo Happiness stamp set to stamp the faces. I added a little bow to add some variety.

Fold the 4 1/4 x 11 inch Basic Black CS card base at the 5 1/2 inch score line. Use the Bone Folder to get a nice crisp fold. Adhere the black bat design from the Magic in This Night DSP to the card front.

Adhere the stamped 4 x 5 1/4 inch Whisper White CS card piece to the inside.

Stampin’ Up! has white and black Stampin’ Dimensionals. I used the white Dimensionals on the back of the ghosts, and the black Dimensionals on the back of the sentiment. Tip: If you cut the large Dimensionals in half they last longer and you still get a good effect.

Adhere the sentiment and the ghosts as shown.

Time for the Bling! I used the Rhinestone Basic Jewels and the Take Your Pick tool to embellish the background.

And Viola! You have a very fun and spooky card to wish someone a “Happy Halloween”! I know Halloween is going to be different this year. My youngest still wants a costume even though there will not be any house to house Trick-or-Treating. I hope folks can still find a way to have some fun!

Thanks for stopping by today. I feels good to be blogging again.

All of the supplies, except the Embossing Buddy, are available at my online store which you may access HERE, or you may click on any of the photos below to go directly to the store.

Product List

Have a wonderful rest of the week!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, encouragement, Love/Affection, Nature, Outdoors, Photopolymer, Sea, Sponge Dauber

Sending Sunshine Stampin’ Up!®

The card for today will be a #simplestamping card because I will use only stamps, ink and paper (and a punch). There is a set of stamps made by Stampin’ Up! to help you easily create your own scenes. Sending Sunshine is the one I will use today. The other similar stamp sets are My Meadow and Snow Front. All of these sets are in the 2020-21 Stampin’ Up! Annual Catalog.

This really is a very simple card to create. You will be surprised.

Measurements: Whisper White Card Stock (CS): 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches (card base), 2 3/4 x 3 3/4 inches and 2 1/4 x 3 1/2 inches; Balmy Blue CS: 4 x 5 1/4 inches.

Use the Memento Black Ink to stamp the sentiment “Hoping Your Day is Perfect” onto the 2 1/4 x 3 1/2 inch Whisper White CS. Take care to position the stamped sentiment so that you can punch it out with the 2 inch Circle Punch.

Lay the layers of the card on the card front and position the sentiment. Move it slightly downward and trace the edge. This will help make sure that the scene is positioned properly.

Place the 2 3/4 x 3 2/4 inch Whisper White CS on the Stampin’ Pierce Mat. When using the Photopolymer stamps (the see-through ones) you need a slight cushion. You could also use your catalog. I cover my Pierce Mat with white scrap paper to avoid getting ink on it. I put the black paper down so you could see the card piece better. Stamp the smaller water onto the Whisper White CS. I placed mine slightly to the right so that it would not be covered by the sentiment later.

Apply the Daffodil Delight ink to the bottom portion of the setting sun stamp. Apply the Calypso Coral ink only to the upper portion by placing the stamp on the edge of the ink pad.

Carefully line up the setting sun and the horizon of the water. Mine is a little too high, but I opted to just let it be. (It’s the little imperfections that make a handmade card special!)

Use the Granny Apple Green ink to stamp the larger branch of leaves. Add some of the smaller branches to make the trees more full.

I added some faint clouds with the Balmy Blue ink by first stamping onto my scrap paper, then stamping onto the card piece. This is called Stamping Off.

To help the sentiment stand out a little, I used a Sponge Dauber with Balmy Blue ink to sponge the edge.

Adhere the 4 x 5 1/4 inch Balmy Blue CS to the Whisper White CS card base, then adhere your stamped card piece. I prefer to use the Tombow Multipurpose Liquid Glue because when I first put the card piece down, I can wiggle it a little to make sure it is straight.

Add Stampin’ Dimensionals to the back of the sentiment and put it in place on the card front being sure to cover the pencil marks.

The card is finished. However, if you would like to add a little Bling! you could use the Wink of Stella Glitter Brush on the water to make it sparkle.

Viola! See how quick and simple that was! Experiment with different colors and combinations of the stamps from the Sending Sunshine stamp set, or combine it with the My Meadow or Snow Front. There are endless possibilities to the scenes you can create!

Product List

Thank you! I really enjoy having you visit. Please leave me a comment.

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Fun/Fancy fold card, Gratitude/ Thanks, Stampin" Blends Alcohol Markers

Kylie’s Monthly International Blog Highlights Gallery- October 2020-Stampin’ Up!® Beautiful Moments with Inspiring Iris

Thank you for visiting Theresa’s Treasures today. I am Theresa and I am a Stampin’ Up!® Demonstrator in Arizona, USA. Today I am taking part in the Monthly International Blog Highlights Gallery put on by Kylie Bertucci. You can see thank you cards made by folks from all over the world! My thank you card was so much fun to make! I hope you enjoy it. Please remember to visit the Highlights Gallery and vote for me!

As I was looking through my collection of Stampin’ Up!® stamps sets, I saw that the Beautiful Moments and Inspiring Iris went together, so I decided to try and make a card using both. I also decided to use my favorite color- purple!

I stamped the women’s dress onto the Soft Sea Foam from the Subltles 6 x 6 Designer Series Paper and carefully cut it out to adhere over the women’s dress on the card front. I colored with the Stampin’ Blends Alcohol Markers in Highland Heather, Purple Posy,Granny Apple Green, Pool Party, and Soft Suede.

The Stampin’ Up!® Card Stock colors are: Gorgeous Grape, Highland Heather and Whisper White. The measurements and instructions are found on my blog post from October 2, 2020 which you can see HERE.

Viola! You have a really special thank you card to send to someone who is very special. I really enjoyed making this thank you card.

Please visit the Highlights Gallery and see everyone else’s card for today!

Product List

Thank you so much for visiting and have a most wonderful day!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, 3D Technique, Animals, Fun/Fancy fold card

Happy Birthday Fun Fold From All Of Us Stampin’ Up!®

I have an awesome Fun Fold Card for you today! This card is great for showcasing the Forever Greenery Designer Series Paper(DSP) which is currently one of the DSP’s on sale for 15% off from October 1 – 31, 2020! It makes a perfect background for the From All Of Us stamp set! This is such a fun card, sure to bring a smile to the Birthday person’s face!

Measurements: Pretty Peacock Card Stock (CS): 5 1/2 x 8 1/2 inches (card base) and 1 1/4 x 3 1/2 inches; Whisper White CS: 3 x 5 1/4 inches, 3 1/2 x 4 inches, and 2 1/4 x 3 1/2 inches; Pear Pizzazz CS: 2 3/4 x 3 1/8 inches, 1 1/4 x 3 1/2 inches, 7/8 x 5 3/8 inches and two at 1 1/8 x 3 1/8 inches; and the Forever Greenery DSP: 3/4 x 5 1/4 inches and 7/8 x 3 inches.

First I would like to show you how to set up the fun fold Pretty Peacock CS card base. You will need your Stampin’ Up!® Paper Trimmer to be able to make cuts in the middle of the card base. I will be showing you the measurements in the next photo. Here I wanted to show how to place the paper and put the cutting blade to cut in the middle of the paper. Place the left edge of the Pretty Peacock card at the 1 1/4 inch mark with the ruler housing the cutting blade raised. Move the cutting blade to the proper measurement (1 inch), then lower the ruler. Move the blade down to the 5 1/4 inch mark on the ruler with the cutting blade, then lift the ruler.

Here are the measurements for the Pretty Peacock CS card base on Whisper White CS so you can see them better. The solid lines are where you cut.

Turn the Pretty Peacock CS card base and make score lines where the dashed lines are shown here.

To fold the card, first make a mountain at the 4 1/4 inch score line, then a mountain at the 5 1/4 inch score lines. Then you make a mountain at the 1 inch score line and a valley at the 2 inch score line. Use a Bone Folder on all the folds to make them nice and crisp. And that is the card base.

Let’s get stamping!

The group of animals from the From All Of Us stamp set is fairly large. I find it easier to apply an even coat of Memento Black ink if I turn the stamp over and lay it on the table to ink it. Stamp onto the 3 1/2 x 4 inch Whisper White CS.

Stamp the small branch of leaves in the Memento ink onto the upper right corner of the 3 x 5 1/4 inch Whisper White CS.

Stamp the “Happy Happy Birthday” sentiment onto the 2 1/4 x 3 1/2 inch Whisper White CS in Pretty Peacock ink. Try as I may, I could not get this stamp to work without leaving a halo (green arrow). Fortunately it is easy to fix.

I made sure I was applying the ink with a straight downward and upward motion. Despite that, ink was still getting on the edge of the red rubber. This makes it easy to see where to do some trimming with you Paper Snips.

Now that the excess red rubber has been cut away, I can get a nice clean stamp of the sentiment.

I used the 1 3/4 inch Circle Punch when I made this card not realizing that the punch had retired. I did try the 1 1/2 inch Circle punch and it does still fit the sentiment. The 1 1/2 inch Circle Punch is current.

I colored with the Stampin’ Blends Alcohol Markers. I used Bronze for the branch, and the Light & Dark Granny Apple Green for the leaves. Adhere the Whisper White CS with the branch on it to the inside of the Pretty Peacock CS card base.

You are going to laugh– I thought the bird was a Flamingo! After I colored it pink I realized it’s an Ostrich! Oh well, it is a Flirty Flamingo colored Ostrich! The beak is actually Light Poppy Parade. The markers are the Stampin’ Blends Alcohol Markers. I used the Light & Dark Granny Apple Green for the turtle. The nose for the bear is Ivory and his belly is Light Cinnamon Cider.

The body of the bear is Dark Cinnamon Cider. The cute little monkey was colored in Light & Dark Crumb Cake. I colored the small bird with the Light & Dark Pretty Peacock. The beak is Dark Mango Melody. I love the Stampin’ Blends Alcohol Markers because they are so brightly colorful and easy to blend.

Fussy cut the group of animals.

Adhere the strips of Forever Greenery DSP to the corresponding strips of Pear Pizzazz CS, then adhere them to the Pretty Peacock CS card base as shown. Adhere the 2 3/4 x 3 1/8 inch Pear Pizzazz CS to the center panel.

I used the new Foam Adhesive Sheets cut them into 1/4 inch strips to add dimension to the group of animals where I adhered them to the front panel of the card base. You could also use Stampin’ Dimensionals.

Use the Sprig Punch to punch 2 sprigs from the 1 1/4 x 3 1/2 inch Pear Pizzazz CS and 2 from the 1 1/4 x 3 1/2 inch Pretty Peacock CS.

Adhere the sentiment circle to the card front by using a 1/4 x 3/4 inch strip of the Foam Adhesive strips (or a couple of Stampin’ Dimensionals) and a little adhesive on the monkey. Adhere the sprigs to the back of the sentiment circle.

Yes there is Bling! There just happens to be Butterfly Gems!

I chose the Terracotta Tile colored Butterfly Gems because I wanted them to stand out.

And Viola! You have an awesome 3D Fun Fold Card to wish a “Happy Happy Birthday”!

More about the Designer Series Paper Sale. From October 1- 31, 2020 select Designer Series Papers are 15% off! There are 15 different packs to choose from and they include DSP from both the 2020-21 Stampin’ Up! Annual Catalog and Stampin’ Up! August- December Mini Catalog. Shop my Stampin’ Up! Online store HERE.

Thanks for taking a look today. I hope you enjoyed this cute Fun Fold Card and will give it a try. One of my customers told me this is her “go to” fun fold card. Yay!

The products I used for today’s card are shown below. Click on any photo to go to my online store.

Product List

Have a wonderful and creative day!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Love/Affection, Thanksgiving

Beautiful Autumn Harvest Blessings Stampin’ Up!®

Even though it is still in the lower 90’s (degrees F) I am anxiously anticipating the cooler weather–soon I hope! I am in the mood for Autumn so I have been making cards with that theme.

The Autumn Punch Pack consists of two leaf punches which I used for the wreath on this lovely autumn card. There is also an acorn punch in the Punch Pack. The sentiment is from an awesome stamp set called Country Home. I have made many cards with this sentiment.

Measurements: Very Vanilla Card Stock (CS): 5 1/2 x 8 1/2 inch card base with a score line at 4 1/4 inches and 3/4 x 3 inches; Bumble Bee CS: 4 x 5 1/4 inches; Forever Gold Laser-Cut Specialty Paper: one panel; scraps that measure at least 1 1/2 x 3 inches in Mango Melody CS, Cajun Craze CS, Pumpkin Pie CS and the Brushed Metal 12 x 12 inch CS in the copper and the gold. You will also need one of the Gold Hoops Embellishments and two of the Acorn Trinkets (not shown).

Stamp the sentiment “Happy harvest Blessings” in Cajun Craze ink onto the 3/4 x 3 inch Very Vanilla CS.

Punch the leaves out with the Autumn Punch Pack leaf punches. I punched out 3 of each of the colors of scrap CS with a mixture of the two leaf types.

The easiest way to adhere the leaves to the card is with the Mini Glue Dots. I stick the end of the leaf onto the Mini Glue Dot right on the roll. When I am ready to use the leaf, I just carefully peel it off of the sheet.

Use the Bone Folder to make a crisp fold at the 4 1/4 inch score line on the Very Vanilla CS card base. Adhere the 4 x 5 1/4 inch Bumble Bee CS and then the Forever Gold Laser-Cut Specialty Paper panel. To adhere the gold panel, I applied the Tombow Multipurpose Liquid Glue around the perimeter very sparingly. Adhere the Gold Hoop Embellishment by applying the Liquid Glue to the back sparingly. Put in place on the card front and apply pressure by placing something like a large punch on top to weight it down for 5 minutes.

Start by applying two Gold Brushed Metallic CS oak leaves slightly to the left of center on the Gold Hoop.

Add one leaf at a time behind the oak leaves. Use a mixture of the colors and different leaf types. Go as far as is pleasing to you.

Cut a banner end on the sentiment card piece. Apply the sentiment to the card with Stampin’ Dimensionals. Add a leaf if desired on the end of the sentiment.

This is a little difficult to see. I used the gold twine in the Forever Greenery Trim Combo Pack to make two bows. The twine was tied onto the two Acorn Trinkets before tying the bow.

To adhere the Acorn Trinkets and bows, use the Mini Glue Dots. Transfer two Mini Glue Dots with the Take Your Pick Tool and place them at the base of the gold oak leaves. Adhere the bow with the Acorn Trinkets, then apply another Mini Glue Dot and adhere the second gold twine bow. NOTE: This card will not be able to be mailed in a standard envelope because the trinkets are too large. You will need to mail it in a bubble envelope.

Now for the Bling! I added the Mango Melody sequins from the Artistry Blooms Sequins. They are very subtle but do add a little more sparkle to the card. Tip: Use the Take Your Pick tool to transfer the sequins-much easier. If you do not yet have the Take Your Pick tool, you can use a toothpick.

Viola! There you have a shiny golden leaf wreath for Autumn!

Thank you for viewing my blog today. Please “like” my blog and leave a comment to let me know what you think. And remember to mail this one in a bubble envelope because of the Acorn Trinkets.

Designer Series Paper sale is coming! From October 1-31, 2020 many of the Designer Series Papers will be 15% off! Stock up and save!

Product List

Theresa