Posted in 2020-2021 Stampin' Up! Catalog, 2021 January-June Stampin' Up!®Mini Catalog, Gilded Leafing, Heart, Love/Affection, Sponging technique, Techniques, Valentine's Day

Gilded Leafing Embellishment- More Techniques for Wacky Wednesday

Stampin’ Up!® Gilded Leafing Embellishment is so fun to use! I introduced the Gilded Leafing last Wednesday and showed a couple of ways to use it. Today I want to expand upon that blog by showing you a few more techniques for using the Gilded Leafing Embellishment.

This card is made using the Meant To Be and Heart to Heart stamp sets which are in the 2020-2021 Stampin’ Up!® Annual Catalog. The Heart Punch Pack is also in the Annual Catalog.

Measurements

Measurements: Merry Merlot Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Very Vanilla CS: 4 x 5 1/4 inches; Merry Merlot CS: 4 x 5 1/4 inches; and Gold Foil Sheets: 1 x 5 inches.

You will also need 3 of the scalloped hearts from the Heart Punch Pack in Merry Merlot.

Additional products and supplies needed include: Versamark ink, a microfiber cloth, a quarter of a Stamping Sponge, a stiff paint brush, a spoon, and the Heat & Stick Powder .

And of course you will need the star of the show- the Gilded Leafing. I have gathered some tips from other demonstrators. One tip is to open the jar and put the Gilded Leafing in a larger container. I just used a container from the dollar store that is about 1/2 of a shoe box in size.

Gilded Leafing with Stamping

The first technique is going to be to use a stamp and the Heat & Stick powder to apply the Gilded Leafing. Stamp the sentiment “Happy Valentine’s Day” in Versamark. Use a spoon to sprinkle some of the Heat & Stick Powder over the sentiment. Shake off the excess. Tip: The size of the font on the sentiment cannot be too thin or much smaller than what I have used.

The next step is to use the Heat Tool to make the Heat & Stick Powder melt. When the white powder melts it turns dark.

Now you can put the heart face down into the Gilded Leafing. Press down slightly. When you pull it out it will have a lot of Gilded Leafing stuck to it.

I brushed of the large pieces with my fingers. (Now my finger tips are gold!) I followed that up with gentle strokes over the sentiment using the Stamping Sponge. Finally I used the microfiber cloth to remove all of the excess Gilded Leafing.

One more piece that requires stamping to apply the Gilded Leafing is the background. The small heart is from the Heart to Heart stamp set. Stamp the heart in Versamark onto the 4 x 5 1/4 inch Merry Merlot CS. Now apply the Heat & Stick power and use the Heat Tool.

Again place the CS with the sticky side face down into the Gilded Leafing and press slightly. Next remove the excess with your fingers, then a Stamping Sponge and finally the microfiber cloth.

Sponging and Gilded Leafing

This is a fun technique which will apply the Gilded Leafing to the edge of the heart. The first step is to apply the Versamark by Sponging it onto the edge. Gently flick the sponge over the edge of the heart. Tip: I cut up the Stamping Sponges until I get a wedge that is an eighth of the sponge. I label the sponge with a square of CS stapled to the top of the sponge wedge.

In order to apply the Gilded Leafing, you will be repeating the procedure described above for the stamping. First you apply the Heat & Stick Powder and use the Heat Tool to melt it. Then you place the heart face down in the Gilded Leafing. Lastly, remove the excess Gilded Leafing with the Stamping Sponge then the microfiber cloth. Now you have a really pretty border around the CS heart.

Gilded Leafing with the Versamark Pad

This time I used the pad of the Versamark to apply a layer of Versamark evenly over the whole heart.

I repeated the procedure above, namely, apply the Heat & Stick Powder, melt it with the Heat Tool, place face down in the container of Gilded Leafing, and remove the excess. Here is the final result! Now I have even more Gilded Leafing on my fingers and everywhere else! Not quite as bad as glitter though.

In summary, now you have a heart with the Gilded Leafing applied with a stamp, one with sponging and one using the whole pad of Versamark.

Putting It All Together

The first step in putting the card together is to adhere the Very Vanilla CS to the inside of the Merry Merlot CS card base. Next adhere the 4 x 5 1/4 inch Merry Merlot CS to the front of the Merry Merlot CS card base. Use your Paper Snips to cut the banner end on the 1 x 5 inch strip of Gold Foil. Now apply Stampin’ Dimensionals to the back of the Gold Foil card piece and adhere it to the card front. The final step is to arrange the hearts as you like and adhere them to the Gold Foil. This is one version I came up with.

Here is the second version that has the Gold Foil strip on a diagonal and the hearts arranged in a cluster.

Viola! You have learned 3 more techniques to use with the Gilded Leafing and have versions of the card to try!

Thanks for coming by today. I hope you are able to experiment with the Gilded Leafing Embellishment soon. If you figure out any new ways to use the Gilded Leafing, please let me know in the comments.

Supplies

Product List

I hope you have a wonderful day!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Avid Stamper, Birds, bow, Fun/Fancy fold card, Stampin" Blends Alcohol Markers

Hey Birthday Chick Fun Fold for Friday!

Hello! Stampin’ Up!® will release Hey Birthday Chick on February 2, 2021! This set is so adorable and fun to use to create cards made to bring a smile to anyone’s face.

The Fun Fold for today is wonderful to help showcase the images and sentiments in the Hey Birthday Chick stamp set! Don’t worry. It really isn’t as complicated as it looks, especially if you try it more than once.

Measurements

Measurements: Basic White Card Stock (CS) card bases: 4 x 9 inches with a score line at 3 1/2 inches, and 3 x 8 1/2 inches with a score line at 4 1/4 inches; Mango Melody CS: 3 3/4 x 5 1/4 inches, and 3 1/4 x 3 3/4 inches; Artistry Blooms Designer Series Paper (DSP): 3 1/2 x 5 inches, 2 3/4 x 4 inches, and 3 x 3 1/2 inches; and Basic White CS: 2 1/4 x 2 3/4 inches, and 2 1/4 x 3 1/2 inches. You will also need about 16-18 inches of the Daffodil Delight 1/4 inch Ruched Ribbon (not pictured).

Stamping

Start out by stamping the cupcake chick onto the 2 1/4 x 2 3/4 inch Basic White CS in Memento Black ink. Next stamp the “Happy Birthday” sentiment under the chicken.

Stamp the sentiment “let’s celebrate you” onto the middle of the 2 1/4 x 3 1/2 inch Basic White CS. Stamp the confetti around the sentiment, first with Bumblebee ink, then with Magenta Madness ink.

Tip-Halos

Tip: When I stamped the confetti in the Bumblebee ink, I got a “halo“. Sometimes the red rubber stamps need a little trimming to avoid having the halos in the future. Some folks trim theirs with an Exacto knife. I just use my sharp Paper Snips to trim the excess red rubber off.

Now it’s time to color in this image. I like the Stampin’ Blends Alcohol Markers. If you haven’t tried them yet, I highly recommend that you do. It is very easy to make color gradients and shadows with the Blends. The cupcake wrapper is colored in Light and Dark Magenta Madness. The chicken’s feet are Daffodil Delight. I colored the Buttercup Comb on the chicken’s head in Light Calypso Coral.

To complete the coloring of the comb, first I used the Dark Calypso Coral to shadow some strands. Then I colored with the Light Calypso Coral and blended the two shades together for the final result.

Switch to the 3 x 8 1/2 inch Basic White CS with the score line at 4 1/4 inches. This is a small secondary card base. Using the Memento Black ink stamp the little chick in the middle to the left of center. Follow up by stamping the sentiment “you’re still a spring chicken” to the right of the chick. I again used the Stampin’ Blends Alcohol Markers to color the chick. (I forgot to color the little chick until I had finished the card.) The birthday hat is colored in Magenta Madness. The chick is colored in Daffodil Delight and his beak and legs in Light Calypso Coral.

To finish up here, use the Everyday Label Punch to punch out the “let’s celebrate you” sentiment. Now you have all the stamping done!

Putting It All Together

To begin putting this Fun Fold together, we will start with the baby chick card base. Use your Bone Folder to make a nice crisp fold at the 4 1/4 inch score line. Then adhere the 2 3/4 x 4 inch piece of Artistry Blooms DSP to the front.

Now we will work on the larger 4 x 9 inch Basic White CS card base. Start by preparing the pieces. Adhere the 3 x 3 1/2 inch Artistry Blooms DSP to the 3 1/4 x 3 3/4 inch Mango Melody CS. Now adhere the 3 1/2 x 5 inch Artistry Blooms DSP to the 3 3/4 x 5 1/4 inch Mange Melody CS.

Lay the larger card base open on the table with the larger section on top. Adhere the 3 3/4 x 5 inch piece of Mango Melody CS with the Artistry Blooms DSP onto this larger portion.

To put together the front of this card base, use your Bone Folder to make a crisp fold at the 3 1/2 inch score line and fold the bottom up. Now you can adhere the 3 1/4 x 3 3/4 inch Mango Melody/Artistry Blooms DSP piece to the front of the bottom section.

This is the tricky part. You will need to adhere the smaller Basic White CS card base to the inside of the larger Basic White CS card base so that when the card is closed up, it is centered.

Finishing Up

In order to get the Happy Birthday chicken piece in the right spot you will need to place it on the front flap of the larger card base so that it is hidden when the smaller card base is closed. Adhere in place.

T

To make the finishing touches, use Stampin’ Dimensionals to adhere the “let’s celebrate you” sentiment piece, then wrap the ribbon around the front of the smaller card base and tie a bow.

Three Bow Tying Tips

There are a few tips I use to tie a bow. The first tip is to do it upside down. The second tip is to use a pair of self closing tweezers to hold the knot while you finish tying the bow.

The third tip is to use a Mini Glue dot under the center knot of the bow to hold it in place. If the tails are not in the proper place, you can also use a Mini Glue Dot to hold the tails in place.

Viola!

Viola! Hopefully you made it through the instructions with a nice card. If you did not, don’t give up. Try it again. Often when I am creating and designing a Fun Fold, I have to do it more than once.

Thanks for hanging in there and reading my blog today. I hope you will find this a great Fun Fold to use to design your own cards.

Just A Note

There has been a change in the white cardstock that Stampin’ Up! is selling. The Whisper White CS is no longer available. Now there is Basic White CS, envelopes, notecards, etc. Below is the flyer with the new item numbers you will need to use to order. I have some on the way, but I have heard there is not much difference.

Supplies

Product List

Hope you have a great day!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Cars, Guys cards, Simple stamping, Stamping-off technique

Stampin’ Up!® Simple Stamping with Moving Along

Hello! I hope you all had a great weekend. Today I have a fun simple stamping card. The Moving Along stamp set by Stampin’ Up! is great for simple stamping. You can create a fun scene with all the little stamps in this set.

There are 24 stamps in this set! Each of the vehicles is a Two-Step Stamp. I recently made a going away card for someone with this set. The card for today is more of a congratulations and happy travels card.

This card is made with several ink colors that are good for a beginner stamper to have on hand. The primary colors are: Pacific Point (blue), Poppy Parade (red) and Daffodil Delight (yellow). I also used Smoky Slate (grey) and Memento black ink.

Measurements

Measurements: Basic White Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Poppy Parade CS: 4 1/8 x 5 3/8 inches; and Basic White CS: 4 x 5 1/4 inches.

Stamping

First I used the Smoky Slate ink to stamp the road on the bottom of the 4 x 5 1/4 inch Basic White CS.

Next switch to the Memento Black ink and stamp the outline for the little car and then the railroad tracks. My tracks are not quite straight so I guess the train ride will be a little bumpy!

Continuing with the Memento black ink, stamp the outline of the train, the caboose and the helicopter. Things are starting to look busy!

Finishing up with the Memento black ink, stamp the banner behind the vehicles. On hindsight, the train could be moved a little to the right so that the banner fits better.

To complete the card we just need to fill in the color which is the second step of the Two Step Stamping. I stamped the train in Smoky Slate, the car in Daffodil Delight, the caboose in Poppy Parade and the helicopter in Pacific Point ink. The blades on the helicopter are stamped in Smoky Slate ink. Now we can add the sentiments. I wanted it to be colorful so I just stamped the sentiments in the coordinating color of the vehicle. You can also add some birds with the Smoky Slate ink. Tip: I put both of the bird stamps on one block and stamped them together.

In order to finish the scene, add some clouds in Pacific Point ink. Tip: To make some clouds look farther away I used the Stamping Off Technique. Stamp the image once, then without adding more ink, stamp a second time.

Putting It All Together

Now we are ready to put it all together. First, adhere the stamped Basic White CS to the 4 1/8 x 5 3/8 inch Poppy Parade CS. There will be a very thin line of color showing around the stamped card piece. Use your Bone Folder to make a crisp fold at the 4 1/4 inch score line on the Basic White CS card base. Adhere the stamped card piece to the front of the Basic White CS card base.

Viola! You have a great card to wish someone a congratulations and happy travels.

Thank you for visiting my blog today. I am a Stampin’ Up! Demonstrator in Arizona, USA and I sell all of the products I use on my cards. Right now is Sale-a-bration! During Sale-a-bration you can choose a FREE product from the Sale-a-bration Brochure when you order $50 in the US. If you are in need of a 2021 January-June Stampin’ Up!® Mini catalog or 2020-2021 Stampin’ Up!® Annual catalog please leave me a comment or go to my Facebook page at Theresa’s Treasures Arts & Crafts and leave me a private message.

Supplies

Product List

Have a great day!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Fun/Fancy fold card, Heart, Love/Affection, Valentine's Day

Stampin’ Up!® Meant To Be Fun Fold Friday

This Stampin’ Up!® Meant To Be Fun Fold Friday card is fun to make and to receive. This unique card is a great one to give as a Valentine to your sweetheart, or even to your Mom, best friend or sister!

Measurements

This card is super fun and uses some of the shiny new Love You Always Specialty Designer Series Paper (DSP).

Measurements: Very Vanilla Card Stock (CS) card base: 4 1/2 x 8 inches with a score line at 3 3/4 inches (score line is not in the center); Rococo Rose CS: 3 1/2 x 7 inches with a score line at 3 1/2 inches; Very Vanilla CS: 2 3/4 x 2 3/4 inches; Love You Always Specialty DSP: 3 1/2 x 4 inches and 4 x 4 inches.

Starting off

I would like to point out that the card base is not scored in the middle. There should be a 1/2 inch difference. Use your Bone Folder to make a nice crisp fold.

The next step is to adhere the Love You Always Specialty DSP. The inside piece is the 4 x 4 inch piece and the outside is the 3 1/2 x 4 inch piece.

Now we will make the Fun Fold piece by using the scalloped heart punch from the Heart Punch Pack to punch a heart out of the right-hand side of the Rococo Rose CS. Save the punched out heart for a later step. Tip: Be sure to push the Rococo Rose CS all the way into the punch to be able to punch the heart out in the position shown.

Stamping

Usually I do the stamping first, but in this case we needed to wait until the heart was punched out. Now it’s time to stamp! In order to coordinate the colors, but also make the ink dark enough, I chose the Merry Merlot ink to stamp the sentiment “Happy Valentine’s Day”.

Putting It All Together

In order to put this card together, you will first fold the Rococo Rose CS card piece on the score line with the open ends on the left; i.e., backwards. Next, center the Rococo Rose on the inside panel of the Very Vanilla CS card base. Close the front of the card to check to see that the card can close completely before adhering the Rococo Rose CS card piece. Adhere the Rococo Rose piece in place.

In preparation of completing the inside of the card, adhere the 2 3/4 inch square Very Vanilla CS to the center of the inside of the Rococo Rose card piece.

Now to complete the inside of the card, position the punched out heart with the Rococo Rose portion of the card closed. Adhere the heart in place. Open the front of the Rococo Rose card piece to ensure it does not get adhered.

Bling!

It is time to add some Bling! The Champagne Rhinestone Basic Jewels go really well with the shiny foil in the Love You Always Specialty DSP and the Rococo Rose CS. Tip: The Take Your Pick tool is great for transferring the rhinestones to your card. If you haven’t ordered one yet, click HERE.

Viola! You have a super cool Valentine’s Day Fun Fold to send off to someone special.

Thank you for joining me today for this Stampin’ Up!® Meant to Be Fun Fold card!

Please check out my Welcome page by selecting the Welcome tab along the top of this blog or click HERE. I have posted the most recent posts to make it easier for you to find a specific card, and to see a gallery of the cards I have made. Please like my page if you like this. Thank you.

Supplies

Product List

Ta-ta for now! Happy crafting!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Avid Stamper, Nature, Snow, Winter Holiday

Cardz4guyz Challenge # 262- Let It Snow

I really love the snow. Mostly because I live in Arizona and don’t have to deal with it unless I choose to go up to the mountain to go skiing. Most years our family will venture up into the White Mountains for a weekend of skiing. This year we will not be going due to the Pandemic and the fact that there is very little snow. Arizona is currently in a drought. However, I decided to create a nice snowy forest scene for the Let It Snow Challenge. For this card I used stamps from Stampin’ Up! Winter Woods, Very Versailles and Snowflake Wishes stamp sets.

The snowy scene I created uses 3 layers on a base of Shaded Spruce Card Stock (CS). The first layer is a Basic White CS stamped in Shaded Spruce ink with the large tree in the Winter Woods stamp set. The center tree is stamped at full strength and the two trees in the back are Stamped Off. The little snowflakes on this first layer are from Snowflake Wishes and are stamped in Balmy Blue ink. The inside of the card is also stamped in the large tree and small snowflakes along the right-hand edge.

The second layer is the retired Balmy Blue Glimmer Paper cut out with one of the Stitched Nested Labels Dies. This is adhered to the back of a Basic White CS cut with a larger Stitched Nested Labels Die.

The top layer is also Basic White CS, cut from the Stitched Nested Labels Dies and is stamped with several different stamps from the Snowflake Wishes stamp set. The Stampin’ Up! ink colors are: Balmy Blue, Misty Moonlight and Highland Heather. The sentiment is from the Very Versailles stamp set and is stamped in Shaded Spruce ink. The final touch is the 3 die-cut snowflakes in the Balmy Blue Glimmer Paper.

Thank you for visiting my Cardz4Guyz Challenge # 262- Let It Snow. Check out other snow-themed projects HERE.

Supplies

Product List
Posted in 2020-2021 Stampin' Up! Catalog, Heart, Love/Affection, Valentine's Day

Stampin’ Up!® Heartfelt Valentine’s Day Greeting

I am so excited to share this Stampin’ Up!® Heartfelt Valentine’s Day Greeting card today. There are several Valentine’s Day stamp sets in the new 2021 Jan-June Stampin’ Up! Mini Catalog, but the Heartfelt stamp set can be found in the 2020-21 Stampin’ Up! Annual Catalog.

I always seem to have the holidays sneak up on me. This year I want to send Valentine’s out to my friends and family to let them know how much I love them. The Stampin’ Up!® Heartfelt Valentine’s Day Greeting card is almost monochromatic with mostly Rococo Rose.

Measurements

Measurements: Very Vanilla Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Very Vanilla CS: 3 x 9 1/2 inches and 4 x 5 1/4 inches; Rococo Rose CS: 2 1/4 x 5 1/4 inches; 2019-2021 In Color Designer Series Paper (DSP): 2 1/4 x 5 1/4 inches; Very Vanilla Scalloped Lace Trim: 7 1/4 inches and one bow.

Stamping

Starting with some Petal Pink ink, stamp the scalloped heart from the Heartfelt stamp set onto the end of the 3 x 9 1/2 inch Very Vanilla CS. Switching to the Rococo Rose ink stamp 2 of the scalloped heart. Note: Remember to use some padding under the Photopolymer (See-through) stamps to get the best image. I use the Stampin’ Pierce Mat.

Finish the stamping with the Rococo Rose ink by stamping the heart with the Happy Valentines Day sentiment onto the end of the Very Vanilla CS.

Punching

The next step is to punch the hearts out using both of the punches in the Heart Punch Pack. Use the smooth-edged heart for the stamped heart with the sentiment, and the scalloped heart punch for the scalloped stamped hearts.

Putting It All Together

First use the Stampin’ Dimensionals to adhere the sentiment heart to the Petal Pink colored scalloped heart. The scalloped edge barely shows but this makes the sentiment heart more elegant.

The next step is to adhere the 2 1/4 x 5 1/4 inch Rococo Rose CS to the top of the 4 x 5 1/4 inch Very Vanilla CS. Then you will adhere the Rococo Rose DSP to the bottom. The DSP will overlap the Rococo Rose CS a little.

Now adhere the Very Vanilla Scalloped Lace Trim to the middle of the card by applying a glue dot to each end and adhering the trim to the back of the card. You may need a few glue dots underneath to keep the trim straight. I applied one glue dot to the center of the ribbon.

Begin putting the hearts on the front by using Stampin’ Dimensionals to adhere the 2 Rococo Rose scalloped hearts to the card front as shown.

Follow with the sentiment heart by placing one Stampin’ Dimension in the middle of the bottom, and use adhesive to adhere the sentiment heart over the center of the 2 scalloped hearts and a little below the 2 scalloped hearts.

To complete the card, use your Bone Folder to make a nice crisp fold along the 4 1/4 inch score line on the 5 1/2 x 8 1/2 inch Very Vanilla CS card base. Now adhere the completed card front to the front of the Very Vanilla CS card base.

Bling!

And now for the finishing touch- Bling! The Champagne Rhinestone Basic Jewels look great with the Rococo Rose. I use the Take Your Pick tool to easily transfer the rhinestones from the acetate to the card.

Add the Very Vanilla Lace bow with a Glue Dot and then add the Champagne Rhinestones.

Viola! You have an elegant Valentine’s Greeting card to send to someone you love!

Product List

Thanks so much for coming by! Have a wonderful day!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, 2021 January-June Stampin' Up!®Mini Catalog, 3D Embossing Folder, Gratitude/ Thanks

Kylie’s Monthly International Blog Highlights Gallery- January 2021-Stampin’ Up!®-Art Gallery

Thank you for stopping by Theresa’s Treasures today. I am Theresa and I am a Stampin’ Up!® Demonstrator in Arizona, USA. Today I am taking part in Kylie Bertucci’s Monthly International Blog Highlights Gallery. The theme is- Thank You. On this gallery, you can see thank you cards made by people from all over the world! My thank you card with the Art Gallery stamp set was such fun to make! I hope you enjoy it. Please remember to visit the Highlights Gallery and vote for me! Thank you!

For today’s lovely thank you card I used the Art Gallery stamp set that is in the new 2021 January-June Mini Catalog. This is a two-step stamp which allows you to stamp the image in two colors to add dimension. Lots of fun!

The background is embossed with the Dainty Diamonds 3D Embossing Folder in the 2020-2021 Annual Catalog. The Square Vellum Doilies are also found in the Annual Catalog.

Thanks so much for stopping by. Click on the button below to vote for my card and see all of the thank you cards in the International Blog Highlight Gallery.

Have a wonderful start on the New Year!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, encouragement, Fun/Fancy fold card, Religious, Winter Holiday

Dove of Hope- Happy New Year

Hello and Happy New Year! I do not think I am alone in being extremely excited to leave 2020 behind! I truly hope for a much better 2021! On that note I decided to create a New Year’s card with the Dove of Hope stamp set by Stampin’ Up!® and it is a Fun Fold!

The Dove of Hope stamp set by Stampin’ Up!® is another one of my favorite stamps from the 2020 Stampin’ Up! Mini Catalog. I love the versatility of the dove which could be used all year long for wishing a Happy New Year, religious celebrations (baptism, communion, confirmation), weddings and to just share some peace, joy and love.

The Dove of Hope stamp set is retiring but is still available until January 4, 2021. You may click HERE to purchase it. I also used the “Happy New Year” sentiment from the Itty Bitty Christmas stamp set which is in the 2020-2021 Stampin’ Up! Annual Catalog HERE

Measurements

Measurements: Whisper White Card Stock (CS) card base: 5 1/2 x 7 1/2 inches with a score line at 3 1/4 inches; Pacific Point CS: 4 1/8 x 5 3/8 inches, 3 1/4 x 3 1/4 inches and 7/8 x 2 7/8 inches; Coastal Cabana CS: 3 1/8 x 5 3/8 inches; the Brights Designer Series Paper* (DSP): 1) Coastal Cabana DSP: 3 x 5 1/4 inches and 2) Pacific Point DSP: 1 1/2 x 5 1/4 inches; and Whisper White CS: two at 3 x 3 inches and 3/4 x 2 1/4 inches. (*find out how you can get this paper at the end of the blog)

Stamping

Start off by stamping the dove in Pacific Point ink onto one of the 3 x 3 inch Whisper White CS. Add some snowflakes in Coastal Cabana ink. Some of the snowflakes are full strength and others are Stamped Off. This helps to add dimension to your card.

Switching back to the Pacific Point ink, stamp the “Peace Joy Love” sentiment onto the 3/4 x 2 3/4 inch Whisper White CS.

In order to use just the part of the sentiment that says “And A Happy New Year” you will need a Pacific Point Stampin’ Write Marker. Color the bottom part of the sentiment, huff on it to moisten it a little, and stamp onto the other 3 x 3 inch Whisper White CS.

Putting it all together

Starting with the inside of the card, adhere the 4 x 5 1/4 inch Pacific Point CS to the inside panel of the Whisper White CS card base. Now adhere the 1 1/2 x 5 1/4 inch Pacific Point DSP to the right hand side.

To finish the inside, adhere the 3 x 3 inch Whisper White CS with the “Happy New Year” sentiment as shown.

Moving on to the card front, adhere the Coastal Cabana DSP to the Coastal Cabana CS. Then adhere the Coastal Cabana card piece to the front of the Whisper White CS card base.

To complete the card front, adhere the dove card piece to the 3 1/4 x 3 1/4 inch Pacific Point CS and the “Peace Joy Love” sentiment to the 7/8 x 2 7/8 inch Pacific Point CS.

Taking card to place the adhesive only on the left hand side, adhere the dove card piece to the card front. Be mindful of the placement so that the white panel underneath does not show around the dove card piece.

Lastly, apply adhesive to the left hand side of the sentiment and adhere it to the card front.

And Viola! Here’s hoping for more Peace, Joy and Love in 2021!

Joining My Team

*Here’s how to get your hands on this gorgeous colorful Designer Series Paper which comes in each color family plus the 2020-2022 In Colors. That is 5 packages of beautiful Designer Series Paper-for FREE when you sign up as a Stampin’ Up! Demonstrator! This is one of the best deals for joining my team as a Stampin’ Up! Demonstrator that Stampin’ Up! has put out there! To sign up click HERE now and then select the “JOIN” tab on top.

If you have any questions about joining, why you would want to join, or what’s in it for you- shoot me an email at theresastreasures.az@gmail.com and I will be happy to talk with you.

Purchasing Product

Product List

Thank you very much for coming by on this last day of 2020! May you and your family be Blessed with a wonderful year ahead!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Mini Catalog 2020, Simple stamping, Winter Holiday

Tree Angle Christmas Card Stampin’ Up!

Yay! I may it through the 15-Day Christmas Card Challenge!

Today’s card is pretty simple but festive. The Stampin’ Up! Tree Angle stamp set has several trees to choose from. I just love the bold sentiment “Joy & Cheer”. The Designer Series Paper (DSP) is from the ‘Tis The Season DSP which is currently on sale at 20% off HERE.

Measurements: Whisper White Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Cherry Cobbler CS: 4 x 5 1/4 inches; Whisper White CS: 3 7/8 x 5 1/8 inches, 3 x 5 inches; Shaded Spruce CS: 1 1/4 x 5 1/8 inches; and ‘Tis the Season DSP: 11/2 x 5 1/8 inches.

Using Cherry Cobbler ink, stamp the sentiment “Happy wishes to you and yours” on the inside panel of the Whisper White CS card base. Stamp the sentiment “Joy & Cheer” onto the lower right-hand corner of the 4 x 5 1/4 inch Whisper White CS. Note: Use the Stampin’ Pierce Mat or a catalog with the Photopolymer stamps to get the best image.

Stamp the medium tree in Cherry Cobbler ink on the middle of the 3 x 5 inch Whisper White CS. Turn the card piece 180 degrees. Stamp the other 2 trees in Shaded Spruce ink as shown.

Fussy Cut all of the trees.

Adhere the ‘Tis the Season DSP to the Shaded Spruce CS. Adhere the “Joy & Cheer” card piece to the Cherry Cobbler CS, then to the front of the Whisper White CS card base. Tip: Use the Silicone Craft Sheet to keep from getting glue on your table.

Adhere the Shaded Spruce CS/’Tis the Season DSP to the card front. Adhere the Shaded Spruce tree as shown.

Use Stampin’ Dimensionals to adhere the last two trees as shown.

Time for the Bling! The Star Designer Elements are in the 2020-21 Stampin’ Up! Annual Catalog HERE.

Add one star to the top of each tree.

Viola! You have a nice traditional Christmas card to wish some Joy & Cheer to someone special.

Thank you so much for visiting today. I hope you enjoyed the 15-Day Christmas Card Challenge. You can see all of the cards on my “Home” tab up top. There are links to the blog post under each photo so you can look at the ones you like.

Product List

Have a very nice day! I hope all is well and stays well with you this Holiday Season!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Gratitude/ Thanks, Winter Holiday

Kylie’s Stampin’ Up!® Demonstrator Training Program Blog Hop- December 2020- Winter Thank You Cards

Thank you for joining me for our Stampin’ Up!® Demonstrator Monthly Team Blog Hop! I am so excited that you could join us today for this blog hop! I know you will get lots of ideas and creative inspiration!

We are a group of Stampin’ Up!® Demonstrators from around the world that are taking part in training that is helping us to build a successful Stampin’ Up!® business and reach some goals we have set. I am a Demonstrator in Arizona, USA. I really appreciate your support.

You may be starting here at Theresa’s Treasures or have come from another blog – either way you can find the link list at the bottom of this post so that you can see every blog post and idea today. Enjoy!

The theme for the cards today is: Thank You. I have many customers who support me and I like to send them a Thank You card every once in awhile. The following set of cards is for my awesome customers. These are thank you notes to send for anyone who orders during the month of December.

This thank you card is super easy and quick to make. You will need to emboss a 4 x 5 1/4 inch Whisper White Card Stock (CS) with the Winter Snow Embossing Folder. Next punch a bunch of trees with the Pine Tree Punch from the ‘Tis The Season Designer Series Paper (DSP). The last piece is the “thanks” which is cut out with the Well Written Dies. The colors are: Cherry Cobbler, Garden Green and Real Red.

I adhered the trees with Stampin’ Dimensionals. The sentiment is adhered with Tombow. An afterthought was that you could cut the sentiment out with an Adhesive Sheet which would make it easier to adhere it to the card front.

Thank you for visiting my blog today. If you would like to purchase the products to make this card, just select from the supply list below the list of blog participants.

There is an amazing line up of Stampin’ Up!® demonstrators from around the world that are working hard to learn how to be even more successful. I know you are going to love seeing all the amazing projects today. Be sure you comment and show us some love so we are inspired to keep creating and sharing fantastic ideas.

Don’t miss one blog link. Remember you are currently on my page – Theresa McEntee-Theresa’s Treasures. See who is below me to know where to go next.

You can click on any photo below to go to my Online Store.

Product List

Thanks again for visiting! Have an awesome day!

Theresa