Posted in 2021 January-June Stampin' Up!®Mini Catalog, Designer Series Paper, Guys cards

Happy Thoughts and Simple Stamping

Welcome to my blog with Happy Thoughts and Simple Stamping. I will be using the Stampin’ Up! Happy Thoughts stamp set and the Well Suited Designer Series Paper (DSP) from the 2021 January-June Stampin’ Up! Mini Catalog. This card is very simple and quick to make.

This card is a very masculine card which looks very nice and is super easy to put together. You could change the sentiment to be anything you want.

The Happy Thoughts stamp set is a great set for a beginner. Not only do you have several main categories of cards, but you also have a sentiment for the inside of the card.

The Well Suited DSP is so awesome for masculine cards! I really struggle with masculine cards. However, a great package of masculine Designer Series Paper can make all the difference. You can purchase this great DSP HERE.

Measurements

Measurements: Basic White Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Night Of Navy CS: 4 x 5 1/4 inches; Basic White CS: 2 1/4 x 4 inches; Well Suited DSP Striped Pattern: 1 3/8 x 2 1/4 inches and 2 1/4 x 2 5/8 inches; Well Suited DSP Diamond Pattern: 1 3/8 x 2 5/8 inches and 2 1/4 x 2 1/4 inches.

Stamping

There is minimal stamping for this card. You just need a sentiment that will fit inside the 2 inch circle punch. I started with the “Thinking of You” sentiment from the Happy Thoughts stamp set. I stamped the sentiment with Memento ink onto the 2 1/4 x 4 inch Basic White CS. Note: If you are new to stamping, please look back at my blog for applying the labels to the Cling stamps HERE.

Use the 2 inch Circle Punch to punch the sentiment out. Tip: I find it to be easy to punch when the punch is lying on the table and I use the heel of my hand to push down firmly and quickly.

Putting It All Together

The next step is to lay out the pieces so you can have an idea of where you want to adhere them. There is about a 1/8 inch border around all of the pieces.

Now we can adhere the pieces. I started with the upper left-hand corner followed by the upper right-hand corner. I finished up with the lower left-hand corner. Note: I have found the best adhesive to be the Tombow Multipurpose Liquid Glue because it allows you a little time to wiggle the piece in place before it really sticks.

Next use the Bone Folder on the Basic White CS card base at the 4 1/4 inch score line to make a crisp fold. Then adhere the front panel to the front of the Basic White CS card base.

Use Stampin’ Dimensionals to adhere the sentiment to the card front.

This step is optional. I felt the card was a little plain, so I used the Well Suited Twine Combo Pack to make a double stranded bow to place right under the sentiment. Note: I have a video to help with making a bow that you can watch HERE.

Viola! You have made a quick and easy masculine card that is good for any occasion just by changing the sentiment!

Thanks for visiting today. I hope you enjoyed how easy this card is. On Wacky Wednesday I will be showing some more Techniques for using the Gilded Leafing Embellishment so I hope you will be able to join me.

Product List

Have a most wonderfully creative day!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, encouragement, Fun/Fancy fold card, Religious, Winter Holiday

Dove of Hope- Happy New Year

Hello and Happy New Year! I do not think I am alone in being extremely excited to leave 2020 behind! I truly hope for a much better 2021! On that note I decided to create a New Year’s card with the Dove of Hope stamp set by Stampin’ Up!® and it is a Fun Fold!

The Dove of Hope stamp set by Stampin’ Up!® is another one of my favorite stamps from the 2020 Stampin’ Up! Mini Catalog. I love the versatility of the dove which could be used all year long for wishing a Happy New Year, religious celebrations (baptism, communion, confirmation), weddings and to just share some peace, joy and love.

The Dove of Hope stamp set is retiring but is still available until January 4, 2021. You may click HERE to purchase it. I also used the “Happy New Year” sentiment from the Itty Bitty Christmas stamp set which is in the 2020-2021 Stampin’ Up! Annual Catalog HERE

Measurements

Measurements: Whisper White Card Stock (CS) card base: 5 1/2 x 7 1/2 inches with a score line at 3 1/4 inches; Pacific Point CS: 4 1/8 x 5 3/8 inches, 3 1/4 x 3 1/4 inches and 7/8 x 2 7/8 inches; Coastal Cabana CS: 3 1/8 x 5 3/8 inches; the Brights Designer Series Paper* (DSP): 1) Coastal Cabana DSP: 3 x 5 1/4 inches and 2) Pacific Point DSP: 1 1/2 x 5 1/4 inches; and Whisper White CS: two at 3 x 3 inches and 3/4 x 2 1/4 inches. (*find out how you can get this paper at the end of the blog)

Stamping

Start off by stamping the dove in Pacific Point ink onto one of the 3 x 3 inch Whisper White CS. Add some snowflakes in Coastal Cabana ink. Some of the snowflakes are full strength and others are Stamped Off. This helps to add dimension to your card.

Switching back to the Pacific Point ink, stamp the “Peace Joy Love” sentiment onto the 3/4 x 2 3/4 inch Whisper White CS.

In order to use just the part of the sentiment that says “And A Happy New Year” you will need a Pacific Point Stampin’ Write Marker. Color the bottom part of the sentiment, huff on it to moisten it a little, and stamp onto the other 3 x 3 inch Whisper White CS.

Putting it all together

Starting with the inside of the card, adhere the 4 x 5 1/4 inch Pacific Point CS to the inside panel of the Whisper White CS card base. Now adhere the 1 1/2 x 5 1/4 inch Pacific Point DSP to the right hand side.

To finish the inside, adhere the 3 x 3 inch Whisper White CS with the “Happy New Year” sentiment as shown.

Moving on to the card front, adhere the Coastal Cabana DSP to the Coastal Cabana CS. Then adhere the Coastal Cabana card piece to the front of the Whisper White CS card base.

To complete the card front, adhere the dove card piece to the 3 1/4 x 3 1/4 inch Pacific Point CS and the “Peace Joy Love” sentiment to the 7/8 x 2 7/8 inch Pacific Point CS.

Taking card to place the adhesive only on the left hand side, adhere the dove card piece to the card front. Be mindful of the placement so that the white panel underneath does not show around the dove card piece.

Lastly, apply adhesive to the left hand side of the sentiment and adhere it to the card front.

And Viola! Here’s hoping for more Peace, Joy and Love in 2021!

Joining My Team

*Here’s how to get your hands on this gorgeous colorful Designer Series Paper which comes in each color family plus the 2020-2022 In Colors. That is 5 packages of beautiful Designer Series Paper-for FREE when you sign up as a Stampin’ Up! Demonstrator! This is one of the best deals for joining my team as a Stampin’ Up! Demonstrator that Stampin’ Up! has put out there! To sign up click HERE now and then select the “JOIN” tab on top.

If you have any questions about joining, why you would want to join, or what’s in it for you- shoot me an email at theresastreasures.az@gmail.com and I will be happy to talk with you.

Purchasing Product

Product List

Thank you very much for coming by on this last day of 2020! May you and your family be Blessed with a wonderful year ahead!

Theresa

Posted in 2020 August-December Mini Catalog, Animals, Guys cards, Nature, Outdoors, Simple stamping, Sponging technique, Winter Holiday

Stampin’ Up!® Merry Moose Christmas #simplestamping card

Today I am returning to some simple stamping for my beginner stampers. The Merry Moose stamp set by Stampin’ Up! will not be available for much longer. It retires at the end of December. So if you would like this beauty, order early. Today is the start of the Giant Year End Close Out Sale. Check out all the sales and discounts at the end of my blog.

The Merry Moose stamp set is really fun and perfect for the outdoors person. I will show you a little technique with sponging & masking today to get the snowdrift.

Measurements: Shaded Spruce Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches; Whisper White CS: two at 4 x 5 1/4 inches; white copy paper: 4 x 6 inches.

Cut the 4 x 6 inch piece of copy paper as shown. This will be the mask to make the snowdrift.

Place the copy paper over one of the 4 x 5 1/4 inch Whisper White CS card pieces. Use a removable tape runner if needed to hold it in place. Using a sponge and the Balmy Blue ink dab the sponge on the ink. Sponge the ink onto the Whisper White CS in a gentle circular motion along the edge of the mask. Then sponge lightly above that to color the “sky”.

Leaving the mask in place, use the Shaded Spruce ink and the pine tree stamp to stamp two trees. Leave a space between the trees to stamp a third tree. Note: These are Photopolymer stamps and need a little padding from a Stampin’ Pierce Mat or catalog to look best.

Remove the copy paper mask. Stamp the third tree between the other two trees. Leave space under the third tree to put your sentiment.

Stamp the moose in Soft Suede ink. The moose is a Two Step Stamp. Here I stamped the detailed stamp after the plain stamp. However, I stamped the detailed stamp first followed by the plain stamp and felt it was easier for me to see to line everything up. Try it both ways to determine which works well for you. I did Stamp Off the plain moose stamp so that I could see the details on the moose more easily.

Stamp the sentiment “Merry Christmoose” in the Shaded Spruce ink.

Use the Shaded Spruce ink and stamp some pine trees on the other 4 x 5 1/2 inch Whisper White CS. I stamped once at full strength. The other two trees are Stamped Off first. Add the sentiment “enjoy the stillness of the season” over the trees. Adhere the panel to the inside of the Shaded Spruce CS card base.

Use your Bone Folder to fold the card base at the 4 1/4 inch score line. Adhere the front panel to the front of the card base.

Viola! That is all there is to it! This is a great card for the outdoors person and is so fun to make! Plus a little humor is good for the soul!

For those of you who love Bling! as much as I do, here is another version of the Merry Moose card with Rhinestone Basic Jewels added like stars in the sky.

Thanks for visiting today! Please leave me a comment and let me know which card has been your favorite during the first 7 days of my 15-Day Christmas Card Making Challenge.

To download the pdf of the retiring product in the 2020 August-December Stampin’ Up! Mini Catalog select the download button below.

To go to my Online Store select any photo below.

Product List

Have a wonderful Holiday Season and keep crafting!

Theresa

Posted in 2020 August-December Mini Catalog, Aqua Painters, Simple stamping, Watercolor wash background

Stampin’ Up!® Snowflake Wishes Watercolor Wash Notecards & Gift Box #simplestamping

Well, Thanksgiving is almost here and it is time to start thinking about Holiday Gifts. These festive Snowflake notecards and cheerful coordinating box will make a great handmade gift! This is a #SimpleStamping project because it is made primarily with Stamps, Ink and Paper. The only other tool you need is a Water Painter.

Although these cards look difficult, they are actually fairly simple. The variety of sentiments in the Snowflake Wishes stamp set makes this a great gift. There are lots of photos to easily guide you through this surprisingly simple project.

The Snowflake Wishes stamp set is rich with snowflake images. I am only going to use 5 of them.

The first step is to make the backgrounds. You will cut one sheet of the Fluid 100 Watercolor Paper at 4 3/4 inches. Next cut the 4 3/4 x 5 inch piece at 3 1/4 inches. This will give you 3 different backgrounds for 3 different notecards.

Watercolor Wash Background: Squeeze your Balmy Blue ink pad so some of the ink gets on the inside of the top. Using the Water Painter, apply a slight puddle of water on the 3 1/4 x 4 3/4 inch Fluid 100 Watercolor Paper. You want the puddle to be in the center, not touching the edge of the card piece. Note: I am using an old Aquapainter, but the new Water Painters can be found in the 2020-21 Stampin’ Up!® Annual Catalog on page 146, item #151298.

Take up some of the Balmy Blue ink with the Water Painter and apply it to the puddle of water on the Watercolor Paper. Move the ink and water around until you like the shape of the Watercolor Wash. If you desire a more intense color you could put a drop of the Balmy Blue Ink Refill on the top lid of the stamp pad.

Now for a little trick to make a creative effect. Shake some coarse sea salt onto the puddle of water. You will see that the salt crystals will take up some of the water and ink right away. Let this dry completely.

Repeat the above procedure using the 2 1/4 x 5 inch piece of the Watercolor Paper and Pacific Point ink.

The remaining 1 3/4 x 4 3/4 inch Watercolor Paper piece is done in Pool Party ink.

For the next step you will need to open up a package of Whisper White Note Cards & Envelopes. These are available in the 2020-2021 Stampin’ Up! Annual Catalog on page 153, item #131527. Note: these notecards also come in Very Vanilla #144236.

While the backgrounds dry, we can stamp the envelopes. This envelope is done in the Balmy Blue ink. The larger snowflake is stamped at full strength. The next snowflake is Stamped Off first.

I added a smaller snowflake at full strength to complete the front of the envelope. Next I stamped several snowflakes on the back flap of the envelope. Note: Be mindful of leaving space for someone to write an address and return address, and place a postage stamp.

The next envelope only uses 2 snowflake stamps and is stamped in Pacific Point ink. Again, stamp on the front and the back flap of the envelope.

The last envelope is stamped in Pool Party ink. I stamped the larger snowflake, one on top of the other, to make it look more full. The remainder are smaller snowflakes stamped on the envelope front and flap.

In order to give the backgrounds a little more time to dry, we will stamp the sentiments. Make 2 of the 3/4 x 4 inch Whisper White cardstock strips with the sentiment “Snowflake wishes for a Merry Christmas.” Make one of the “May your season sparkle” on 1 1/4 x 2 1/2 inch Whisper White cardstock.

Trim both ends of one of the “Snowflake wishes…” strips to make a banner end. Tip: Make a cut in the middle, then from one corner to the middle on each side to have the banner look even every time.

When the backgrounds have dried completely, brush the salt off of the card piece. Each will have a different look. The most noticeable effect is on the Pacific Point color. You can see that the ink is darker around where the salt crystal was. I just love this effect!

We will start with the Balmy Blue background. Stamp the sentiment “Thank you Snow much” in Pacific Point ink onto the lower right-hand corner. Then use the Balmy Blue ink to stamp the larger snowflake, followed by the medium snowflake and finally the smallest snowflake.

Now we will stamp on the Pacific Point ink background. Using Pacific Point ink, stamp the larger snowflake on the left-hand side followed by the group of snowflakes.

For the Pool Party ink background, I stamped one image on top of the other for the larger snowflake in Pool Party ink.

Now stamp the medium sized snowflake and finally the smaller snowflake in Pool Party ink.

Now we will put everything together.

Complete the Balmy Blue card by adhering the stamped card piece to the front of one of the notecards.

Adhere the background done in Pacific Point ink to the front of the notecard. Use Stampin’ Dimensionals to adhere the “Snowflake Wishes…” sentiment with the banner ends onto the card front.

Adhere the Pool Party background to the front of a notecard. Use Stampin’ Dimensionals to adhere the “May your season…” sentiment to the card front.

Now that we have all the awesome notecards done, let’s create a nice box for them to go in. The Mini Paper Pumpkin Boxes on page 152 of the 2020-21 Stampin’ Up! Annual Catalog are perfect for these notecards. Lay the box flat with the matte surface on top. Stamp the largest snowflake in Balmy Blue ink.

Follow with the Pool Party ink and a medium snowflake. Finish with a small snowflake in Pacific Point ink.

Assemble the box and add the second “Snowflake wishes….” sentiment to the front.

Match the envelopes to the notecards and place in the Mini Paper Pumpkin Box.

Viola! You have a cheerful set of Holiday cards in a lovely box to give to someone special.

Thanks so much for stopping by today. I am having a “Black Friday” ordering special. For any order of $35 or more between November 22 to November 27, 2020- you will receive a package of Rhinestone Basic Jewels for free from me! I really value your business and appreciate your support!

You may click on any photo below to be directed to my Online Store, or click HERE to go right to the Online Store.

Product List

Take some take to start crafting today and have a wonderful week!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Gratitude/ Thanks, Spotlight Technique, Thanksgiving

Stampin’ Up!® Floral Essence for Thanksgiving Spotlight Note Card

Hello fellow stampers and crafters! Today I have a darling little note card made with the versatile Floral Essence Stampin’ Up! stamp set using the Spotlight Technique. These note cards are 4 x 4 inches when complete and could be used at place settings for the Thanksgiving meal (assuming that is possible this year!). Note: This card is CASE’d from Shannon West’s presentation during our recent Onstage Convention.

I am using two exceptional stamp sets: Floral Essence and A Wish For Everything. Why are they exceptional? There are endless possibilities for the beginner stamper to use the flowers in the Floral Essence stamp set, depending on the color of ink and paper chosen. Purple, pink, and yellow for Spring; bolder brighter colors for Summer; and red/green or blue/white for Winter. The colors chosen for today’s card are Fall colors. The words in the “A Wish For Everything” cover, well, just about everything a beginner would need.

Measurements: Cinnamon Cider Card Stock (CS): 4 x 8 inches with a score line at 4 inches; Very Vanilla CS: 3 3/4 x 3 3/4 inches, 2 3/4 x 3 7/8 inches and 1 x 4 inches; In Good Taste Designer Series Paper (DSP): 3 7/8 x 3 7/8 inches.

You will also need: Cinnamon Cider, Bumblebee and Just Jade ink, Champagne Rhinestone Basic Jewels, the Classic Label Punch, the 2-inch Circle Punch and the Metallic Ribbon from the Basket Weave & Metallic Ribbon Combo pack. All products are found in the 2020-21 Stampin’ Up!® Annual Catalog except the Metallic Ribbon which is on page 45 of the 2020 Stampin’ UP!® Aug-Dec Mini Catalog.

Let’s get stamping!

Use the Cinnamon Cider ink to stamp the largest solid flower slightly right of center. Be mindful of the upper border of the flower as you want it to be 1/4 inch from the top. Use the Bumblebee ink to stamp the smaller solid flower on either side as shown. Tip: The Floral Essence stamps are Photopolymer, or see-through stamps. You get the best image if you stamp on something with a little “give” to it. I am using the Stampin’ Pierce mat, covered in white scrap paper. You may also try using your catalog.

Use the Bumblebee ink to stamp the center of the large solid flower. There is a different center stamp for the smaller solid flower. Stamping off Technique: stamp once onto scrap paper before stamping the center of the smaller solid flower onto your card. This will result in the center of the smaller solid flower being a little lighter than the flower itself.

Stamp the stems in Just Jade ink. I did turn the stamp upside down to stamp the stem for the Bumblebee flower to the left. I stamped twice to get the stem for the Bumblebee flower on the right. Add the leaves.

You may fill in the open space by stamping a few leaves using the single leaf stamp.

Use the Cinnamon Cider ink to stamp a large solid flower off to the right side of the 3 3/4 x 3 3/4 inch Very Vanilla CS. This will be the inside of your card, so leave a little space for writing. While you have the Cinnamon Cider handy, stamp the sentiment “Happy Thanksgiving” onto the 1 x 4 inch Very Vanilla CS strip. Note: The sentiment is a Red Rubber stamp. You do not need the extra padding. The image for the red rubber comes out with more clarity when stamped on a hard surface. I just forgot to take the Stampin’ Pierce Mat away.

With Bumblebee ink stamp two more small solid flowers on the inside of the card. Stamp the center of the Cinnamon Cider flower. When stamping the center for the Bumblebee flowers remember to stamp off first. Add the stems and leaves in Just Jade ink.

Spotlight Technique: Use the 2 inch circle punch to punch out the Cinnamon Cider flower. I turned my card 180 degrees and put the punch upside down on the craft table so that I could see what I was punching. I wanted the edge of the circle to be 1/4 inch down from the top of the card piece.

Here is the end result.

Use a Mini Glue Dot to adhere the Metallic Ribbon to the back of the card piece you just punched.

Use a Bone Folder to fold the 4 x 8 inch Cinnamon Cider CS card base at the 4 inch score line. The Bone Folder makes a nice crisp fold. Adhere the inside panel of your card.

Adhere the 3 7/8 x 3 7/8 inch In Good Taste DSP to the card front. Now adhere the punched out card piece.

Apply Stampin’ Dimensionals or strips of the Foam Adhesive Sheets and adhere the punched out circle to the card front to complete the Spotlight Technique. Tip: I have been using the Foam Adhesive Sheets in place of the Stampin’ Dimensionals. I have had a joint fusion in my right index finger. The thumb and index finger no longer come together so it makes peeling off the small hexagonal backing of the Stampin’ Dimensionals a challenge. I found that if I cut the Foam Adhesive Sheets into 1/4 inch strips, I can use those which make peeling the backing off a bit easier.

Use a Mini Glue Dot to adhere the bow, and a Stampin’ Dimensional to adhere the sentiment. This little note card looks great, but I think we need some Bling!

The Champagne Rhinestone Basic Jewels match perfectly! That is one remarkable point regarding Stampin’ Up! products-everything matches! Each color of card stock has coordinating ink. Some colors also have matching ribbon or embellishments! In this case the Cinnamon Cider coordinates with the Metallic Ribbon, the DSP, the Cinnamon Cider ink and the Champagne Rhinestones! Anyhow, I digress. The Take Your Pick tool helps to easily transfer the tiny rhinestones to your card.

Viola! You have a darling little note card to wish someone a Happy Thanksgiving!

Thanks for joining me today. I hope you can find some time to do some crafting. If you ever have any questions, especially if you are hung up on a project, shoot me an email and I will do my best to help you sort it out. My email is: thereastreasures.az@gmail.com.

If you are in need of any product, click on any photo below to go to my online store. Let me know if I can help you narrow down your wish list to a shopping list. The Holidays will be here before you know it. It’s a great time to purchase product to make your cards. You can also get to my online store by clicking HERE.

Product List

Have a tremendous week!

Theresa

Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Punch, Punch Art, Winter Holiday

Stampin’ Up!® Perfectly Plaid Christmas Card

Hello! Happy November! I can’t believe how fast this year is going for me! I am showing a Christmas card today because I am worried I will not be able to create and send all of my Christmas cards on time. It is good to get started early. However, I am not forgetting Thanksgiving. I plan to do a few Thanksgiving cards in the blogs over the next few weeks.

This is a fun and simple Christmas card using the Perfectly Plaid stamp set, the Pine Tree Punch and the ‘Tis The Season Designer Series Paper (DSP). You will find the Perfectly Plaid stamp set and Pine Tree Punch in the 2020-21 Stampin’ Up! Annual Catalog. The ‘Tis The Season DSP is in the 2020 Stampin’ Up! August-December Mini Catalog. Let’s get started!

Measurements: Whisper White Card Stock (CS): 4 1/4 x 11 inches with a score line at 5 1/2 inches and 2 1/4 x 4 inches; Real Red CS: 4 x 5 1/4 inches; and ‘Tis The Season DSP 2 x 5 1/4 inches and 4 different designs at 2 1/4 ix 6 inches.

Using Garden Green ink, stamp the sentiment “Merry Christmas” on the 2 1/4 x 4 inch Whisper White CS leaving space around the sentiment so you can punch it out. Stamp the sentiment “Hoping that your busy year…” on the inside of the 4 1/4 x 11 inch Whisper White CS card base.

Use the Everyday Label Punch to punch out the sentiment “Merry Christmas”. Set aside.

Get together the Pine Tree Punch and the 4 ‘Tis The Season DSP strips that measure 2 1/4 x 6 inches.

Punch out one Pine Tree from each strip of ‘Tis The Season DSP.

Adhere the 2 x 5 1/4 inch strip of the ‘Tis The Season DSP to the 4 x 5 1/4 inch Real Red CS. Fold the 4 1/4 x 11 inch Whisper White CS card base at the 5 1/2 inch score line and use the Bone Folder to make the fold crisp. Adhere the Real Red/DSP card piece to the front of the Whisper White CS card base.

Position all of the Pine Trees and the sentiment on the card front. Adhere two of the Pine Trees flat.

Adhere the third Pine Tree and the sentiment with Stampin’ Dimensionals.

Adhere the fourth Pine Tree to the inside of the card.

Now for the Bling! The Champagne Rhinestone Basic Jewels and the Star Designer Elements can both be found in the 2020-2021 Stampin’ Up! Annual Catalog.

Place a star over each tree and then scatter the Champagne Rhinestone Basic Jewels.

Viola! You have a fun and simple Christmas card!

Thank you so much for stopping by today. Announcements: Be sure to order from the Stampin’ Up! August-December Mini Catalog as soon as possible. Some items will sell out, and once they are on backorder you may not get them before Christmas. Consider purchasing a stamp kit as a gift. There are all inclusive kits in both the Annual and Mini Catalogs. If you would like a paper catalog, shoot me an email at: theresastreasures.az@gmail.com.

To get to my online store, click on any one of the photos below.

Product List

Have a wonderfully creative week!

Theresa

Posted in 2020 August-December Mini Catalog, Halloween, Owl, Stampin" Blends Alcohol Markers

Have a Hoot Halloween Boo!

I love getting costumes made for my kids, even though now that they are older the costumes are more complicated. I love to sew and don’t get a chance until Halloween. However, even more than sewing costumes, I love to stamp and create fun Halloween cards to send out!

The card I created for today is very quick and simple to make. The images are from the Stampin’ Up!® Have a Hoot stamp set in the August-December 2020 Mini Catalog. The little owl is so adorable!

Measurements: Basic Black Card Stock (CS) card base: 4 1/4 x 11 inches with a score line at 5 1/2 inches; Whisper White CS: 4 x 5 1/4 inches and 2 x 2 3/4 inches; Mango Melody CS: 2 x 2 3/4 inches; and Magic in this Night Designer Series Paper (DSP): 2 x 5 1/2 inches. Note: when cutting the DSP, position a spider’s web in the center and on the top of the card piece.

Using the Memento Black ink, stamp the owl in the tree onto the 2 x 2 3/4 inch Whisper White CS.

Use the Memento ink to stamp the little owl hiding behind the pumpkin onto the lower righthand corner of the 4 x 5 1/4 inch Whisper White CS. Stamp the “Boo!” sentiment above the owl.

I used the Stampin’ Blends Alcohol Markers in: Basic Black, Pumpkin Pie, Mango Melody, So Saffron, Cinnamon Cider, Bronze and Just Jade.

I started with the Dark Cinnamon Cider around the outer edges of the owl, then filled it in with the Light Cinnamon Cider.

I colored the tree with the Bronze, the spider with Basic Black, the talons and beak with Dark Mango Melody and the eyes with Dark So Saffron.

The pumpkin was colored along the outer edge with Dark Pumpkin Pie. Next I colored with Light Pumpkin Pie and then Dark Mango Melody blended in moving toward the center of the pumpkin. The eyes of the owl and pumpkin face are colored in Dark So Saffron. I colored the stem in Dark Just Jade.

The owl was again colored with the Dark Cinnamon Cider around the outer edges and Light Cinnamon Cider toward the center of the owl.

Adhere the 4 x 5 1/4 inch Whisper White CS with the owl and pumpkin to the inside of the Basic Black CS card base.

Use the Bone Folder to fold the Basic Black card base at the 5 1/2 inch score line to get a crisp fold. Adhere the 2 x 5 1/2 inch Magic In This Night DSP to the card front on the left with the spider’s web on top.

Adhere the owl in the tree to the 2 x 2 3/4 inch Mango Melody CS slightly off-set. Adhere this to the card front.

Now the Bling! The Iridescent Pearls in the 2020 Mini Catalog are so awesome! As you move the pearls, the color changes from Pretty Peacock to Gorgeous Grape to Shaded Spruce!

I added a few of the Iridescent Pearls to the center of the strip of DSP and then scattered around on the Basic Black CS.

Viola! Such an adorable Halloween card that was so quick to put together! Thanks for visiting today!

There is a 24 hour Stamp Sale coming up! The 15% off selected stamp sets starts September 23, 2020 at 12 am and ends at 11:50pm. More information is below including a list of the stamp sets on sale. Consider purchasing stamp sets for gifts to give this holiday season. Shop HERE and use Host Code: RVC2GE3V before check out.

Happy crafting!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Designer Series Paper, encouragement, Love/Affection, Nature, Simple stamping

Stamping on Designer Series Paper with Forever Fern Wishing You Happiness

These beautiful colorful cards are so easy to make! The leaves come from the Forever Fern stamp set and the sentiments are from So Sentimental. Both of these sets are so versatile. The So Sentimental has several great sentiments in addition to those in the photo, including “hello baby”, “healing hugs”, “for you”, and “this calls for confetti”.

Here is the card I will demonstrate today. The colors are Magenta Madness, Rich Razzleberry, Blackberry Bliss and Balmy Blue.

Measurements: Rich Razzleberry Card Stock (CS) card base: 5 1/2 x 8 1/2 inches with a score line at 4 1/4 inches: Whisper White CS: 4 x 5 1/4 inches and 2 1/2 x 3 inches; Artistry Blooms Designer Series Paper (DSP): 4 x 5 1/4 inches; and Balmy Blue CS: 2 5/8 x 3 1/8 inches.

Stamp the sentiment “Wishing you much happiness today and always” from the So Sentimental stamp set in Blackberry Bliss ink onto the 2 1/2 x 3 inch Whisper White CS. Then use the Blackberry Bliss ink and the largest bunch of leaves from the Forever Fern stamp set and stamp the leaves to frame the sentiment. Be sure to use a scrap paper underneath so you don’t stamp on your table! Our nickname for Blackberry Bliss is Blackberry Mess!

Next use the Balmy Blue ink to stamp a smaller bunch of flowers on the upper left corner, and the Magenta Madness ink to stamp the berry design on the lower right corner of the sentiment. This creates a little frame around the sentiment.

Use the Blackberry Bliss ink and the larger bunch of leaves to stamp onto the Artistry Blooms DSP. I tried to visualize where the sentiment will be and use that as a focal point for the end of the stems.

Next use the Magenta Madness ink to stamp the berry design, and the Balmy Blue ink to stamp the smaller bunch of leaves. I continued to use the focal point for the ends of the stems. On some I turned the stamp around and stamped with the stem off the edge of the paper to fill in the blank spots.

I wanted to make the inside a little more fancy. I started on the top of the 4 x 5 1/4 inch Whisper White CS with the Blackberry Bliss ink and the large bunch of leaves, and worked down the right side. I used the Balmy Blue ink with the small bunch of leaves and then the Magenta Madness with the berry design on the bottom.

Adhere the stamped Whisper White CS panel to the inside of the 5 1/2 x 8 1/2 inch Rich Razzleberry CS card base. Use you Bone Folder to fold the card base at the 4 1/4 inch score line so you get a nice crisp fold.

Adhere the stamped sentiment card piece to the 2 5/8 x 3 1/8 inch Balmy Blue CS. Use Stampin’ Dimensionals or the new Foam Adhesive Sheets on the back. Tip: If you have arthritis in you fingers, I have found that cutting the Adhesive Sheets into 1/4 inch strips is much easier to use than the little hexagonal Stampin’ Dimensionals. I just have a hard time peeling of the backs of those hexagons!

Adhere the stamped DSP to the front of the Rich Razzleberry card base, then add the sentiment card piece to the middle of the front.

And now for some Bling! I am so in love with the Artistry Blooms Self Adhesive Sequins Pack because there are 4 colors with 2 different sizes! They go with just about everything! To easily transfer the sequin I use the Take Your Pick tool. I slide the pointed end under the adhesive on the back of the sequin and than just set it down where I want it, apply a little pressure, and it sticks in place.

Viola! You have stamped on Designer Series Paper to make a wonderful, colorful card to wish some happiness to someone!

I really appreciate that you stopped by today. I hope you enjoyed the card and will give it a try. Experiment with different papers and stamps to see what you like. There are so many possiblities!

If you would like to purchase any of the Stampin’ Up! products from my Online Store, you may click HERE or click on any of the photos below to get to the Online Store.

Product List

Here’s wishing you happiness today and everyday!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Nature

Forever Greenery in Blue-SIP Series #1

What is a SIP series? SIP stands for stamps, ink and paper. The next three cards I am going to show on my blog will primarily be made with just SIP (and a little Bling! of course).

These are the three cards I will show over the next few blogs. I am using the Forever Fern stamp set (part of the Forever Greenery Suite) and three ink colors: Misty Moonlight, Pretty Peacock and Seaside Spray.

You will be so surprised at how simple this card is to make!

Measurements: Whisper White Card Stock (CS): 11 x 4 1/4 inches with a score line at 5 1/2 inches and 5 x 3 3/4 inches; Misty Moonlight CS: 5 1/4 x 4 inches.

On the 5 x 3 3/4 inch Whisper White CS and using the largest stamp of the leaves in the Forever Fern Stamp Set, stamp with the Misty Moonlight ink once at full strength on the bottom left corner. Do not add any ink to the stamp and stamp again in the upper right hand corner, turning the stamp. This is another way of Stamping Off where you stamp both the full strength and the stamped off images on the card.

Stamp the next 3 images with the Pretty Peacock ink. The bottom left hand corner is stamped at full strength. The top upper right hand corner stamp is at full strength, and the lower image is the Stamped Off image.

Now use the small bunch of leaves with the Seaside Spray ink. Stamp at full strength on the top left hand corner, followed by a Stamped Off image right above it. Stamp another full strength image on the bottom of the left hand corner.

Stamp the sentiment “love and laughter FOREVER AFTER” in Misty Moonlight ink. Note: I have tried stamping the sentiment before stamping all the leaves as well. Either way works. Just see which way works well for you.

Use the Bone Folder to fold the 11 x 4 1/4 inch Whisper White CS at the 5 1/2 inch score line. Adhere the 5 1/4 x 4 inch Misty Moonlight CS to the front of the Whisper White card base. Now adhere the stamped 5 x 3 3/4 inch piece. You may certainly stop here as this is a very nice elegant card. However, if you are like me this card needs a little Bling!

In the New 2020-2021 Stampin’ Up! Annual Catalog there are many new choices for embellishments (Bling!) on pages 156-158. These are part of the Artistry Blooms Adhesive-backed Sequins. They match perfectly!

I find it to be very easy to move the sequins from the acetate to the card with the Take Your Pick tool. I just slide the pick under the adhesive on the sequin and move it to the card. Easy as that!

And Viola! you have a nice elegant card with Bling! You can change up the sentiment to be anything from “Happy Birthday” to “Get Well” to “With Sympathy”. It makes for a very versatile card.

Thanks for stopping by today. I hope you try the Forever Fern stamp set with your favorite colors. I have also played around with purples and pinks. It is very easy to make very elegant looking cards!

Do you want a FREE bundle? There is a joining special until June 30, 2020! When you sign up as a Stampin’ Up! Demonstrator, you not only get to choose $125 worth of great stamping stuff for $99, you get to choose any one stamp set with dies, or any one stamp set with a punch! Click HERE and then click on the “SPECIALS” tab. Scroll down and you will see the “Sign Up Now” button. You will also get other perks, including a 20-25% discount on future orders! Let me know if you have any questions by commenting on this blog or email me at theresastreasures.az@gmail.com. I would love to have you on my Stamping Gems Team!

If you need a product, just click on the image below and you will go directly to my Online Store.

Product List

Happy Crafting!

Theresa

Posted in 2020-2021 Stampin' Up! Catalog, Love/Affection, Stampin" Blends Alcohol Markers, Summer

Celebrate Sunflowers and Celebrate You

Boy is it hot today! Even though it is only 7 am I have been out watering my flowers I am hot and sweaty! I love flowers both real and on stamps. The Celebrate Sunflowers stamp set by Stampin’ Up! is just so beautiful and fun to color. Especially if you have some Stampin’ Blends Alcohol Markers. The Blends make it possible to color the flowers so they are just so lovely!

This card can be used for several occasions making it very versatile.

Measurements: Whisper White Card Stock (CS): 11 x 4 1/4 inches with a score line at 5 1/2 inches, 5 x 3 3/4 inches, 2 1/2 x 2 1/2 inches and 3 1/2 x 3/4 inches; Bumble Bee CS: 5 1/4 x 4 inches.

Using Memento Black ink, stamp the sentiment “Let’s Celebrate You” onto the 3 1/2 x 3/4 inch Whisper White CS. Stamp the smaller sunflower onto the 2 1/2 x 2 1/2 inch Whisper White CS. Then stamp the larger sunflower on the 5 x 3 3/4 inch Whisper White CS slightly on the right and leaving enough space on top for the sentiment.

The Stampin’ Blend Alcohol Marker colors I used are the light and dark Soft Suede, Daffodil Delight, Mango Melody, and Old Olive. I also used Light Calypso Coral (not pictured).

I colored the leaves with the Light Old Olive, then added the Dark Old Olive as an accent.

The center of the flower is colored first in Light Daffodil Delight, then Light Soft Suede. The Dark Soft Suede is used to make some dots on the Light Soft Suede.

The first layer of petals is colored with the Light Daffodil Delight. I accented these petals with Dark Daffodil Delight by drawing on the lines that are already on the petals. The back petals are also colored in Light Daffodil Delight but I used the Dark Daffodil Delight more heavily on those petals. Set this aside while we color the larger sunflower.

The top layer of petals are colored in the Light Daffodil Delight. The next layer of petals are colored in Light Mango Melody. The center of the flower was done with the Light and Dark Soft Suede and Light Daffodil Delight.

The back layer of petals are colored in Dark Mango Melody. I used the Dark Daffodil Delight to accent the Light Daffodil Delight petals in the first layer by drawing on the lines that were already there.

I used the Dark Mango to accent the petals colored in Light Mango and added Light Calypso Coral to accent the Dark Mango petals.

I used the edge of the Light Daffodil Delight to accent the border around the sentiment. Tip: Use a light touch as the alcohol markers bleed slightly and if held on the paper too long they will leave a blotch.

Use your Paper Snips to fussy cut the smaller sunflower. Sometimes I leave a slight white border around the image when I fussy cut. Today I cut right next to the outer black line. Either way looks fine.

Use the Bone Folder to make a crisp fold at the 5 1/2 inch score line on the 11 x 4 1/4 inch Whisper White CS card base. Adhere the 5 1/4 x 4 inch Bumble Bee CS to the front of the card base. Now adhere the larger sunflower panel to the Bumble Bee CS.

Adhere the smaller sunflower and sentiment to the card front with Stampin’ Dimensionals.

And now for the Bling! No card of mine is complete without some Bling! The Gold Glitter Dots add just the right amount of sparkle.

I use the Take Your Pick tool to transfer the Gold Glitter Dots easily from the acetate sheet to the card front.

Viola! You have a lovely, cheery and bright card to help someone celebrate–a birthday, a promotion, a great report card–anything!

Thanks for being here today! I hope your day is very bright and cheery!

Product List

Theresa🦋