Posted in beginner stamper, Designer Series Paper, encouragement, Inspiration, Mini Catalog 2020, Punch

Bonus! Card and Bookmark from one 6 x 6 inch Best Dressed Designer Series Paper!

This is a great way to use most of the 6 x 6 inch piece of a Designer Series Paper (DSP). I know a lot of folks don’t really read a real live book anymore, but you can use the bookmark in your planner, recipe book, Bible, etc. Nonetheless, an inspirational card and bookmark is a wonderful handmade gift to give someone.

Measurements: Whisper White cardstock (CS): 8 1/2 x 5 1/2 inches with a score line at 4 1/4 inches, 6 1/4 x 2 inches, 5 x 2 inches and 5 x 2 1/2 inches; Best Dressed DSP: 6 x 6 inches (I will show you how to cut to 5 1/4 x 4 inches and 5 1/4 x 1 3/4 inches); and Melon Mambo CS: 5 x 2 inches. You will also need the following Punches: 1 3/4 inch Circle, Pretty Label, Butterfly Duet and Scalloped Tag Topper.

Using the new Stampin’ Up! Paper Trimmer, make the first cut on the Best Dressed DSP at 5 1/4 inches.

Turn the paper 90 degrees. The second cut is at 4 inches. The larger piece is 5 1/4 x 4 inches, which is what you will need for the card front. The smaller piece is 5 1/4 x 2 inches. Tip: I labeled the cutting blade “CUT” and the score blade “SCORE” so I would remember which was which. It is so sad when you accidentally CUT when you meant to SCORE!

The third cut will trim the 5 1/4 x 2 inches down to 5 1/4 x 1 1/4 inches. This will be the piece for the bookmark. You will end up with a little bit of left over DSP, but not much.

Now for some stamping! I love the Butterfly Wishes stamp set because there are several different types of butterflies. These two happen to coordinate with the Butterfly Duet Punch. Stamp the larger butterfly in Melon Mambo ink onto one end of the 5 x 2 1/2 inch Whisper White CS. Stamp the smaller butterfly in Melon Mambo ink on the other end.

There are two sentiments, one for the card and one for the bookmark. Stamp the sentiment “Love to celebrate you” in Melon Mambo ink in the center of one end of the 5 x 2 inch Whisper White CS. Stamp the other sentiment “It was a perfect day because of you” in the center of the other end. Be mindful about the placement so that the punches will be able to go around the sentiments.

The punches are the 1 3/4 inch Circle Punch and the Pretty Label Punch. Use the Circle Punch to punch out the sentiment “Love to celebrate you”. Tip: I find it easier to use the punches if I lay them upside down on the table and use the heel of my hand to push down firmly and quickly.

Use the Pretty Label Punch to punch out the sentiment “It was a perfect day because of you”.

Punch out a Pretty Label using the Melon Mambo CS.

Use the Butterfly Duet Punch to punch out the two butterflies.

Punch out the smaller butterfly first, then the larger butterfly.

Use the Scalloped Tag Topper Punch with the 6 1/4 x 2 inch Whisper White CS to make the bookmark. Tip: This punch is a little different. I do flip it upside down so I can see where the paper is, but you need to squeeze it firmly and quickly to make it punch the paper. It may be better to squeeze with both hands.

Gather all the pieces as shown above to make the bookmark.

Adhere the 5 1/4 x 1 3/4 inch DSP to the Whisper White CS bookmark.

Use Stampin’ Dimensionals on the back of the sentiment and the small butterfly. Adhere these to the bookmark.

For a finishing touch, I used 6 inches of the 5/8 inch Polka Dot Tulle Ribbon and then tied a bow around it with 10 inches of Whisper White Bakers Twine.

Use the Bone Folder on the 8 1/2 x 5 1/2 inch Whisper White CS to get a nice crisp fold at the 4 1/4 inch score line. This is the card base. Adhere the 5 1/4 x 4 inch Best Dressed DSP to the front of the card base.

Adhere the Melon Mambo CS Pretty Label to the back of the Pretty Label with the sentiment on it.

Apply Stampin’ Dimensionals to the back of the sentiment label and the large butterfly. Adhere the sentiment to the card front.

I had to remove one of the Stampin’ Dimensionals so that the butterfly would sit properly over the label with the sentiment.

Tie a bow with 10 inches of the 5/8 inch Polka Dot Tulle and one with 10 inches of the Whisper White Bakers Twine. Use Glue Dots to adhere the bows to the card front.


Viola! You have a beautiful card! But wait……

Viola! You have a beautiful card and a matching bookmark! What a great gift to give to someone to uplift their spirits!

Thanks for joining me. I hope you try this out. It is a lot of fun to make! Remember that the new Annual Catalog is just around the corner, and there are many stamp sets, punches, dies and embellishments which are retiring. Go to my online store by clicking SHOP HERE and look at the Last Chance Products. There are several on sale, some at 60% off! Let me know if I can be of assistance in placing your order. Contact me in a comment on this blog, private message me on my Theresa’s Treasures Facebook page by clicking HERE, or send me an email at: theresastreasures.az@gmail.com. Also notify me if you would like a 2020-2021 Stampin’ Up! Annual Catalog mailed to you. I would love to have you as my customer!

To purchase a product listed below, click on the photo and you will go to my Online store.

Product List
Posted in Animals, beginner stamper, Easter, Mini Catalog 2020, Rabbit, Sponging technique

Welcome Easter Cute Bunny

Hello and Good Day! I hope you amazing people are doing well and hanging in there with all the social distancing and self quarantine. It is really different. Easter will be very different as I will be “going” to mass online. Not the usual pretty dress, and new shirt and tie affair I am used too.

This is a cute Easter card with Springtime colors. It is very simple to make using the Welcome Easter stamp set in the Stampin’ UP! Mini Catalog.

Measurements: Card Base is Petal Pink card stock (CS): 8 1/2 x 5 1/2 inches with a score mark at 4 1/4 inches; Whisper White CS: 4 1/2 x 3 1/4 inches and 2 3/4 x 2 1/4 inches; Best Dressed Designer Series Paper (DSP): 5 1/2 x 2 inches; 5/8 inch Organdy Striped Ribbon 7 inches and a bow.

Let’s Get Started:

I wanted the “Happy Easter” sentiment to be able to fit inside the Pretty Label punch. One thing you can do is cut the stamps so you can use a different arrangement for the sentiments. It is a little scary at first! They do fit back together on the block so you can use the original arrangement. Use the Melon Mambo ink to stamp the ‘Happy” onto the 4 1/2 x 3 1/4 inch Whisper White CS.

Stamp the “Easter” sentiment just under the “Happy” and slightly to the right. See how it fits nicely inside the Pretty Label Punch? Go ahead and punch the sentiment out.

Stamp the bunny and the little bee in Memento ink onto the 2 3/4 x 2 1/4 inch Whisper White CS. I just love this cute bunny!

Stamp the little patches of grass in Granny Apple Green ink just under the bunny. Tip: It is best to use the size of block that most closely fits the size of the stamp. You have more control and will not rock the stamp as much, thereby avoiding the halos you can get around your stamp. Sometimes you have to place the stamp on the diagonal to achieve this.

Use the Pineapple Punch Stampin’ Write Marker to color the bee. The Petal Pink Stampin’ Write Marker is used for the bunny’s ears and feet. Add a little bit of black with the Black Stampin’ Write Marker on the bee and the bunny’s nose.

Now we are going to use the Sponging Technique. To get the sponge ready, cut the Stamping Sponges in quarters, then cut each quarter in half. I attach a square of the coordinating color of cardstock with the name of the color written on it by stapling it to the top.

The Sponging Technique is an easy way to add a slight border to the card piece. Dab the ink with the sponge, then brush the edge of the card piece back and forth as you move along the edge. Tip: Start with light pressure so you only get a little ink on the card piece. You can always add more color but you can’t take it away!

This is the completed bunny piece with just a hint of Melon Mambo ink along the edge.

Use the Sponging Technique on the Pretty Label sentiment and the strip of Best Dressed DSP. On the DSP just sponge the two long sides.

We will adhere the ribbon with Glue Dots. Apply one Glue Dot to each end of the 7 inch piece of Organdy Striped Ribbon. Tip: I find it easiest to put the ribbon on top of the Glue Dot while it is still on the roll.

Adhere the ribbon to the strip of Best Dressed DSP, slightly to the left. Use the Bone Folder to make a crisp fold on the card base.

Adhere the DSP piece to the front of the card base, slightly to the left. Use a Glue Dot to adhere the bow to the top left of the card.

Now add some Stampin’ Dimensionals to the back of the bunny and the sentiment. Tip: Make your Stampin’ Dimensionals last twice as long by cutting them in half.

Adhere the bunny piece, then the sentiment piece.

Viola! You have a very sweet Easter card! I hope you are able to observe the Easter season in a way that is still meaningful to you. It may take some creativity. Stay open to new ways of doing things. I have really been enjoying meeting with my friends on Zoom. That may be a great way for you and your family to get together.

Thank you so much for joining me today. I really enjoyed making this cute card.

Today is the last day for Stampin’ Up!’s Sale-a-bration! This is your last chance to chose free product with a $50 or $100 order. There are new items on the list which include the Dual Butterfly Punch and several DSP’s. Check out my store by clicking here.