Posted in 2020 August-December Mini Catalog, 2020-2021 Stampin' Up! Catalog, Avid Stamper, Christmas, flowers, Stamparatus, Stampin" Blends Alcohol Markers, Stamping-off technique, Winter Holiday

Stampin’ Up!® Poinsettia Petals Merry Christmas with Stamparatus Tips & Tricks

I am on day 4 of my 15-Day Christmas Card Challenge! Today I have a gorgeous poinsettia card wishing a Merry Christmas!

The Poinsettia Petals stamp set and coordinating Poinsettia Dies create the perfect poinsettia for this card. The background has a Christmas Layers Die which is in the 2020-21 Stampin’ Up Annual Catalog. The Poinsettia Petals and Poinsettia Dies are in the 2020 Aug-Dec Mini Catalog.

Measurements: Very Vanilla CS card base: 4 1/4 x 11 inches with a score line at 5 1/2 inches; Very Vanilla CS: 3 7/8 x 5 1/8 inches, 7/8 x 3 1/4 inches, 5 x 5 inches and 4 x 6 inches; Mossy Meadow CS: 4 1/8 x 5 3/8 inches and 3 x 4 inches; and Real Red: 4 x 5 3/4 inches.

Warning: this blog is a little longer than usual so I can introduce some new products with some tips.

Stamp the sentiment ” Merry Christmas” in Mossy Meadow ink onto the 7/8 x 3 1/4 inch Very Vanilla CS. Set aside.

To make the background a little more interesting I stamped some small dots from the Gather Together stamp set in Real Red and in Mossy Meadow by Stamping Off first. Set aside.

To make it more simple to stamp all the pieces for the poinsettia, berries and leaves I used the Stamparatus. Tip: The Poinsettia Petals stamps are Photopolymer. In order to get a good image, it is helpful to use the Stamparatus Deluxe Foam Mat. The other option which I had used for quite awhile it to use the Stamparatus Foam Mat with a Silicone mat on top.

I placed the card stock I want to stamp on about 1 inch from the inner edge. Tip: If the stamp is too close to the inner edge it will not stamp all the way. Position the two leaves and the berries on one half of the 4 x 6 inch Very Vanilla CS. Trick: I wrapped my magnets in colorful duct tape with a little extra tab to grab onto. This makes it easier to pick the magnets up. It also prevents them from getting stuck together.

Apply Memento Black Ink to the stamps, close the panel and press firmly and evenly.

Turn the Very Vanilla CS and stamp onto the other side. As you can see, there is an area that did not get stamped on the upper right leaf. This is the beauty of the Stamparatus. Just apply more Memento ink, close the panel, press more firmly on the unstamped area, lift the panel and Viola! the problem area is fixed!

Using the second panel, position the three sizes of poinsettia on the 5 x 5 inch Very Vanilla CS. Repeat the process. Note: If you wanted to make, say 25 cards, that were all similar, this is the way to do it quickly. You just keep stamping until you have as many as you want. Can you tell I love my Stamparatus!

When I am done stamping I stamp onto a scrap paper to remove most of the ink. I then use my Simply Shammy moistened with water to clean the stamps. The Simply Shammy can be rinsed out although the ink does stain it a bit.

I used the Stampin’ Blends Alcohol Markers to color the poinsettia, leaves and berries. The colors I used were: Light & Dark: Cherry Cobbler, Real Red, Mossy Meadow and Old Olive. I used Light Mango Melody for the center of the poinsettia. For the berries I used the Bronze and Ivory. The images are cut with the Poinsettia Dies.

The leaves and petals of the poinsettia can be curved with the Bone Folder to add dimension to the card.

The last piece needed is the branch of leaves from the Christmas Layers Dies. I cut the branch into three smaller branches. Now we can put it all together.

Adhere the branches onto the stamped Very Vanilla CS card piece. Use a Stampin’ Dimensional on the center of the largest poinsettia and adhere it to the card piece. Add the berries. Since the petals of the poinsettia are not adhered, the berries slide right under the petals.

Use Stampin’ Dimensionals in the center of the two remaining poinsettias and adhere them to the first poinsettia. Adhere the leaves in place. Use Stampin’ Dimensionals to adhere the sentiment “Merry Christmas”.

Adhere the Cherry Cobbler CS to the front of the Very Vanilla CS card base, then adhere the Mossy Meadow CS. Finish the card by adhering the poinsettia panel to the card front.

Add a little sparkle with the Wink of Stella Glitter Brush.

Of course, I think the card needs a little more Bling! Add the Cherry Cobbler rhinestones that are in the Holiday Rhinestone Basic Jewels for a touch of sparkle in the background.

Viola! You have a gorgeous poinsettia card to wish someone a Merry Christmas!

Thanks for hanging in there today. This one was a little long. I wanted to be sure to introduce some new products and techniques with a few tips & tricks..

All of the products I used to create this card are pictured below. Select any photo to go to my Online Store and start shopping. If you have any questions, please send me an email at theresastreasures.az@gmail.com

Product List

I hope you give this one a try. It is a little bit of a challenge, but the end result gives a nice feeling of accomplishment. Have a great day and spend some quality time stamping soon!

Theresa

Posted in 2020 August-December Mini Catalog, beginner stamper, Christmas, Coloring Techniques, flowers, Fun/Fancy fold card, Mini Catalog 2020, Stampin" Blends Alcohol Markers, Winter Holiday

Super Simple Gatefold Fun Fold with Poinsettia Petals for an Elegant Christmas Card

Hello and Happy Friday! This month is flying by! I was looking forward to visiting my family for Thanksgiving, but they have a shelter in place order. Needless to say, none of use is getting together in person. We might try meeting on Zoom. Looking on the bright side- I can stay home and make more Christmas cards!

The card for today’s Fun Fold Friday is called a Gate Fold Card. The band with the poinsettia on it is a Belly Band. This elegant holiday card is super simple to make so you can send one to your friends & family to spread the Holiday Cheer.

Measurements: Very Vanilla Card Stock (CS) card base: 5 1/2 x 8 1/2 scored at 2 1/8 and 6 3/8 inches; Very Vanilla CS: 5 x 5 inch for stamping, a 2 inch circle and 1 3/4 x 2 3/4 inches; Red Velvet Paper: 2 x 3 inches and 1 1/2 x 9 1/8 inches; and the Poinsettia Place Designer Series Paper (DSP): 2 x 5 3/8 inches. You will also need 9 1/8 inches of the Vanilla open weave ribbon from the Forever Greenery Trim Combo Pack.

Stamping: Starting with the Memento Black ink, stamp one of the complete poinsettias, two berry sprigs and three leaves onto the 5 x 5 inch Very Vanilla CS. Use the Real Red ink to stamp the sentiment “May Magic & Wonder bloom this holiday” onto the 1 3/4 x 2 3/4 inch Very Vanilla CS.

I used the Stampin Blends Alcohol Markers to color the images. If you have not tried them yet, I highly recommend them. I have tried other alcohol markers that are more expensive and have not gotten results as good as I have with the Stampin’ Blends. The colors for this card are: Light & Dark Real Red, Dark Cherry Cobbler, Light & Dark Mango Melody, Light & Dark Old Olive and Dark Mossy Meadow. I will show you how I got the look I did, but this is just one way. There are many other ways to color with the Blends. To start off, I colored the leaves completely with the Light Old Olive.

I added some shading with the Dark Old Olive followed by the Dark Mossy Meadow. You could go over the leaf again with the Light Old Olive to blend everything together.

The berry sprigs were colored first with Light Real Red, then Dark Real Red followed by a little Dark Cherry Cobbler. For the poinsettia, I outlined the top layer of petals with the Dark Cherry Cobbler to try and achieve a 3D look. Next I colored the entire poinsettia with the Light Real Red.

I blended the Cherry Cobbler outline into the Light Real Red with the Dark Real Red. To add a finishing touch, I added a little more shadow with the Dark Cherry Cobbler. Note: The best part of coloring with the Stampin’ Blends Alcohol Markers is experimenting with them yourself to see what kind of look you get.

Cut all the images out either by Fussy Cutting with your Paper Snips or using the coordinating Poinsettia Dies with the Stamp and Cut Machine. Fold the Very Vanilla card base with the Bone Folder to get crisp folds.

Adhere the Poinsettia Place DSP to the front flaps. Adhere the 2 x 3 inch Red Velvet to the inside. Use Stampin’ Dimensionals to add the sentiment card piece on top of the Red Velvet.

Add the berry sprigs. Tip: For very delicate items I use a tweezers to position the item after first applying a wee bit of glue.

Wrap the 1 1/2 x 9 1/8 inch Red Velvet Paper around the card so that it is snug but not tight. You want it to slide off easily, but not fall off. Also wrap the ribbon around. I did not need to glue the ribbon to the Red Velvet except where I attached the ends of the Belly Band in the front. Tip: I recommend using a strong adhesive to attach the ends of the Belly Band. Examples of a strong adhesive are the Tombow Multipurpose Liquid Glue and the Tear & Tape. Both can be found in the 2020-21 Stampin’ Up!® Annual Catalog.

Adhere the poinsettia leaves to the Very Vanilla 2 inch circle. Use Stampin’ Dimensionals to adhere the poinsettia.

Use Stampin’ Dimensionals to adhere the Very Vanilla CS Circle to the front of the Belly Band, covering the ends of the Belly Band. Add some Bling! with the Holiday Rhinestone Basic Jewels. Tip: I use the Take Your Pick Tool to transfer the rhinestones to the card.

Viola! That is all there is to it! This card is a really fun way to share the Holiday Cheer with a loved one!

Click on the image to go to my Online Store

On Tuesday, November 24, 2020 there will be 10% off select products from the Annual Catalog. If you are still planning your Christmas cards, look over pages 56 to 63 of the 2020-21 Stampin’ Up! Annual Catalog. There are 12 stamp sets for the Holidays! Click HERE to check it out now!

Thank you to all of you who came by today. I so appreciate you! Thank you to all of you who have placed orders to help me keep my business going. These are difficult times and it is so nice to have your support. I have my own “Black Friday” Special. When you place an order for $35 or more between November 22 -27, 2020, you will receive your choice of a free package of Rhinestone Basic Jewels or a Bone Folder from me!

I hope you have a wonderful weekend and are able to start on your Holiday cards & gifts!

Theresa

Posted in 2020 August-December Mini Catalog, Autumn, flowers, Gratitude/ Thanks

Kylie’s Monthly International Blog Highlights Gallery-August 2020-Stampin’ Up!® Poinsettia Petals Bundle

Welcome to Theresa’s Treasures today for Kylie’s August 2020 Monthly International Blog Highlights Gallery! The Stampin’ Up!® Poinsettia Petals Bundle has been so much fun to create with! I hope you enjoy my card!

I started this card off by stamping a lot of the poinsettias. I set them up on the Stamparatus so I could stamp all the pieces together. Then I colored them in all kinds of colors.

I settled on this particular one for today because of the fall colors. I used the Stampin’ Blend Alcohol Markers in Cajun Craze and Calypso Coral for the poinsettia, and Old Olive and Mossy Meadow for the leaves. So Saffron is the color for the center of the poinsettia.

I used the same colors of Stampin’ Blends to color a strip of Poinsettia Place Designer Series Paper (DSP). The sentiment “Thanks for all you do” is stamped in Cajun Craze and is from the Ornate Thanks stamp set. The elegant border around the sentiment is from the Ornate Layers Dies and is cut in Cajun Craze Card Stock (CS). The card base is Very Vanilla CS.

I added a little sparkle with the Gold Gilded Gems and the gold-trimmed All the Trimmings Ribbon in Old Olive.

I am so grateful for all of you around the world who contribute to Kylie’s International Blog Highlights Gallery. I love to visit your blogs and see your creativity!

I would be so grateful if you would vote for me this time! Thanks in advance!

I hope you have a beautiful and creative day!

Theresa