Posted in beginner stamper, Cars, Cling Stamp, Designer Series Paper, Masculine, Occasions Catalog 2019

Fast Car Card

Still looking for a great card for your guy? This is a fast one, and is the last in a series of 3 masculine cards using the Stampin’ Up! Geared Up Garage Stamp Set. Today I introduce you to a card made with Stampin’ Up! Designer Series Paper.

Stampin’ Up! has several types of paper, one being Designer Series (DSP). This paper is a little thinner than cardstock and will have a pattern on both sides. Some come in 12 x 12 inch size. The Classic Garage Designer Series Paper comes in 6 x 6 inches with 4 each of 12 double-sided designs.

The designs are pictured above. For this card I chose the lug nut design.

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches folded in half at 4 1/4 inches; Whisper White 3 1/2 x 2 inches and 3 x 3/4 inches; Shaded Spruce 5 1/2 x 3 1/4 inches and Classic Garage DSP 5 1/2 x 3 inches.

This card will also be pretty quick to make. First I adhered the DSP to the Shaded Spruce. Then I adhered that piece to the card base.

I stamped the car image in Memento ink onto the Whisper White 3 1/2 x 2 inch piece.

Next, I stamped the sentiment “All Geared Up To Celebrate” onto the 3/4 inch strip of Whisper White. It is important to get the label on straight so you can stamp straight! See the post on the Stampin’ Up! Cling Stamps to help you do this.

I cut the banner edge as shown.

I added 3 Stampin’ Dimensionals to raise the sentiment up a bit.

You can leave the car this way, or choose to color it. Refer to the first post in this series for instructions on coloring and shading with the Stampin’ Blends markers.

So there you have it my friends! A fast car card that was fast to make!

Stampin’ Up! continues their Sale-a-bration sale! For every $50 you spend, you can choose a free product from the Sale-a-bration brochure.

Stampin’ Up! Products used include: Stamp Set: Geared Up Garage #148590; Cardstock: Whisper White #100730 and Shaded Spruce #146981; Classic Garage Designer Series Paper #148482; Ink: Memento #132708; Stampin’ Blends: Real Red combo pack #147935; Clear Block: C #118486 and D #118485; Paper Snips #103579; Stampin’ Dimensionals #104430; and Multipurpose Liquid Glue #110755.

Posted in beginner stamper, Cling Stamp, Father's Day, Grunge style, Masculine, Occasions Catalog 2019, Stamping-off technique

Father’s Day in January?

This is the 2nd in a series of Blog posts about masculine cards. I have had many a time when a holiday has crept up on me before I was able to get a card ready. Ever had that happen? Well, today I am making a Father’s Day card, mostly because the sentiment is in the stamp set -Geared Up Garage-which I started using the other day. But also, I want to be ready this year!

This style of card is “grunge”. It is a lot easier than it looks!

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches folded in half and burnished with the Bone Folder, Basic Black 5 1/4 x 4 inches, Whisper White 4 1/2 x 3 1/4 inches and a scrap of Whisper White 2 3/4 x 2 1/2 inches, and Real Red 2 1/4 x 1 inch.

You will also need Memento ink and a C block to start. Later you will need an A, B, C and D block.

Just a reminder for how to put the label on the new Cling Stamps. First remove the stamp. Then turn the label sheet so the words are backward. Pinch the middle of the desired label.

Gently remove the paper backing without removing the label. Place the stamp with the foam side down over the label, taking care to line up the edges. Press firmly.

Now gently remove the label attached to the stamp. This is very sticky! Do not set it down on anything. Put it on the block right away and when finished, directly back into the stamp case. I do not always put the labels on, but I typically will put on the labels for sentiments.

Use the Memento ink and stamp the Father’s Day sentiment onto the scrap of Whisper White. Note: You do not need the Piercing mat for the red rubber stamps, just stamp onto a smooth firm surface.

Use your paper snips to cut around the sentiment leaving a slight border.

Adhere the sentiment to the Real Red piece. Now cut a banner edge, first by making a cut in the center, then from each corner to the center as shown. Set aside.

Now for the “grunge”! Mount the lug nuts on an A block, the oil can on a B block, the tool box on a C block and the oil spill on a D block (Clockwise from top).

Start with the tool box since it is one of the larger images. Stamp an odd number of times.

Now stamp the oil can and then the lug nuts an odd number of times. I messed up and stamped 6 lug nuts! Fortunately the sentiment with cover one!

We are going to use a technique called “Stamping Off” for stamping the oil spill. First apply Memento ink to the oil spill stamp and stamp it on a scrap of paper. Then stamp onto the card piece. This gives a slightly lighter image. That way the oil spill doesn’t over-power the rest of the images. It just makes it “grungy”.

Continue to first stamp on the scrap paper, then on the card piece, until you like the result.

Adhere the Basic Black to the folded card base. Now adhere the stamped “grunge” piece.

Apply Dimensionals to the back of the sentiment banner and adhere to the front of the card. Viola! You have a Father’s Day card ready to go! Now, if you can just put it away somewhere where you can find it!

Stampin’ Up! products used include: Stamp set: Geared Up Garage #148590; Cardstock: Whisper White #100730, Basic Black 121045 and Real Red #102482; Ink: Memento #132708; Blocks A #118487, B #117147, C #118486 and D #118485; Paper Snips #103579; Dimensionals #104430; Multipurpose Liquid Glue #110755