Posted in beginner stamper, Cake, Designer Series Paper, flowers, Occasions Catalog 2019, Wedding

Sparkly Wedding Cake Card

Boy, what a day! I was planning on finishing the blog about this gorgeous, sparkly wedding cake card, but my youngest son had a Science Fair paper and display board to do. So we spent the whole day doing that! Now, I am going to get this out to you!

This beautiful wedding card is not hard to make as you will see by the following steps. This is the 3rd in a series of 3 cards made with Stampin’ Up!’s Piece of Cake stamp set.

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches folded at 4 1/4 inches; Petal Pink 5 x 2 1/4 inches, Floral Romance Designer Series Paper (DSP) 4 3/4 x 2 inches, Fresh Fig 3 x 2 1/4 inches and Whisper White 2 3/4 x 2 inches.

Some of the other products you will need are Memento Ink, Fresh Fig Ink and the Dark Flirty Flamingo Stampin’ Blend alcohol marker.

First stamp the cake platter in Memento ink onto the bottom half of the 2 3/4 x 2 inch piece of Whisper White.

Next stamp the cake in Fresh Fig onto the platter. As you can see, some ink got on my block. Fortunately it did not get on my cardstock!

Now add the little floral bouquet in Fresh Fig on top of the cake.

Use the Dark Flirty Flamingo Stampin’ Blend alcohol marker to color the roses and rosebuds, as well as the center of the daisy-like flowers.

Adhere the colored cake onto the 3 x 2 1/4 inch piece of Fresh Fig. Set aside.

The Floral Romance Designer series paper has this piece of Vellum in the pack. Isn’t it gorgeous? Vellum is a special type of paper that is more translucent. As such, the adhesive will often show through to the other side. Tip: I used a very thin line of the Multipurpose Liquid Glue around the edges.

When adhering the Vellum to the piece of Petal Pink cardstock, I gently massaged the glue into an even layer so that it did not show through.

Lay the two completed card pieces onto the Whisper White card base without using any adhesive. This is to help with placement of the sentiment. Stamp the sentiment “Mr & Mrs” in Memento Ink to the lower right hand corner of the card front.

Now use adhesive to adhere the Petal Pink piece to the card front.

Using Stampin’ Dimensionals on the cake piece, adhere it to the middle of the card front.

This is a very pretty wedding card. But we are not finished yet. We are going to add some bling!

These sparkly pink flowers and sequins are from the Gingham Gala Adhesive-Backed Sequins in the Stampin’ Up! 2019 Occasions Catalog. In order to transfer them easily, I use the Paper Piercing Tool.

First I added one flower sequin in the center, then one on either side of it to continue the garland.

Next I added 3 sequins. The 3rd sequin is on the little pink flower.

And Viola! You have made a wonderful, gorgeous and sparkly wedding card! Now to get invited to a wedding!

I am heading out of town for the rest of the week to attend a medical conference. You may or may not know that I am a retired Family Medicine Physician. I still try to keep my brain active by keeping up my medical education hours. My plan is to try to blog while there. I have the next 3 cards all ready to go! If it doesn’t work out, I will have the blogs for you next week.

I am going to be using the Stampin’ Up! Nine Lives stamp set. And yes, you guessed it, it has to do with cats!

Stampin’ Up!’s Sale-a-bration is still on for another month, until March 31, 2019. Some of the free products are running out, so don’t delay any further and make your order soon! For more details, go to my store by selecting the “Shop” button on top.

The Stampin’ Up! products I used today include: Stamp Set: Piece of Cake #148610; Cardstock: Whisper White #100730 and Fresh Fig #144242; Ink: Memento #132708 and Fresh Fig #147144; Clear Blocks: B #117147 and C #118486; Stampin’ Blends alcohol markers: Dark Flirty Flamingo #147032; Gingham Gala Adhesive-Backed Sequins #148561; Stampin’ Piece Mat #126199; Paper Piercing Tool;126189; Stampin’ Dimensionals #104430 and Multipurpose Liquid Glue #110755.

Posted in beginner stamper, Birthday, Cake, Photopolymer, Simple stamping

Happy Birthday Cake

Hello fellow stampers! Today I have a wonderful Birthday cake card for you!

This is the second in a series of 3 cake cards and is made with Stampin’ Up!’s Piece of Cake stamp set. Let’s get started!

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches folded at 4 1/4 inches, Flirty Flamingo 5 1/4 x 4 inches, Whisper White 3 1/2 x 2 1/4 inches and 3 x 1/2 inches. You will also need one of the Pearlized Doilies.

I will be using the Flirty Flamingo and Smoky Slate ink pads and the Stampin’ Blend alcohol markers in Dark Flirty Flamingo, Light Mango Melody and Light Smoky Slate. I will also use Memento ink (not pictured).

The first stamp is the little bunch of swirled lollipops. Who remembers getting those at the State Fair as a kid? I do! Stamp the lollipops in different directions all around the Flirty Flamingo card piece. Keep in mind that a small heart will need to fit in between the lollipops, so do not stamp them too close together. Tip: Remember to use the Stampin’ Pierce Mat for the Photopolymer stamps

Now use the small heart to fill in between the lollipops. This is the background for your card, your own Designer Series Paper!

Adhere this to the Whisper White card base.

The cake platter is stamped in Smoky Slate. Stamp towards the bottom so there is enough room for cake and candles.

Stamp the cake in Flirty Flamingo.

And now the candles in Flirty Flamingo.

I used the Dark Flirty Flamingo Stampin’ Blend alcohol marker to color the icing.

Now color the candles in Dark Flirty Flamingo.

For the flames I used the Light Mango Melody Stampin’ Blend alcohol marker.

The shadow on the platter is done in the Light Smoky Slate Stampin’ Blend alcohol marker.

Using Memento ink, stamp the “Happy Birthday” sentiment onto the Whisper White strip on the right hand side.

Cut a banner end first by cutting the middle, then from each corner to the middle.

Apply the Stampin’ Dimensionals to the back of the cake.

Place the doily slightly to the right and adhere to the Flirty Flamingo card piece. Adhere the cake piece on top of the doily.

Apply the Stampin’ Dimensionals to the back of the “Happy Birthday” sentiment strip.

Adhere the “Happy Birthday” sentiment strip to the right side of the card front.

And now you have a wonderful Happy Birthday card! That went by so quickly, don’t you think? Remember how special it feels for someone to remember your birthday? Pass that feeling on to someone today and give them this card!

The Stampin’ Up! Sale-a-bration Sale is still running strong! Some of the free products have run out! Don’t delay any further as this sale is only until March 31, 2019. Place your order today! Remember that for every $50 you may choose a free Sale-a-bration product from the Sale-a-bration brochure. There are also some choices for spending $100. One new choice is the Painted Seasons bundle #150349. Please see my Facebook post at Theresa’s Treasures Arts and Crafts from February 21, 2019 for an example from that bundle. If you have any trouble ordering, please private message me on my Facebook page and I will be glad to help.

The Stampin’ Up! products I used today include: Stamp Set: Piece of Cake #148610; Cardstock: Whisper White #100730 and Flirty Flamingo #141416; Ink: Flirty Flamingo #147052, Smoky Slate #147113 and Memento #132708; Clear Blocks: A #118487, B #117147, and D #118485; Stampin’ Blends alcohol markers: Dark Flirty Flamingo #147032, Light Mango Melody #147943 and Light Smoky Slate #145054; Pearlized Doily #146936; Stampin’ Piece Mat #126199; Paper Snips #103579; Stampin’ Dimensionals #104430 and Multipurpose Liquid Glue #110755.

Posted in beginner stamper, Cake, Occasions Catalog 2019

Cake is the Answer!

Today is a very gloomy day outside and we are supposed to get a big snow storm. To top it off I have caught a sinus cold and I feel miserable. Good thing there is card making to be done to take my mind off of everything! When I get to making and creating cards, the time just flies by and I feel exhilarated!

Today is the first in a series of three cards made with Stampin’Up!’s Piece of Cake stamp set. Today’s card is very easy and simple to make.

This is the stamp set I will be using. There are many possibilities for the cake and the occasion. We will be making the card above as well as a birthday card and a wedding card in the next blog posts.

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches folded at 4 1/4 inches, Flirty Flamingo 4 1/2 x 1 inches, Whisper White 3 x 3 inches and 4 1/2 x 3/4 inches.

I will also be using Memento ink, and the Stampin’ Blends alcohol markers in Light Flirty Flamingo, Dark Flirty Flamingo and Light Mango Melody (not pictured) .

The first step is to lay the sentiment on the strip of Whisper White to be able to get the sentence straight. Once you have it straight, press the clear block over the Photopolymer stamp to adhere it. Now use the Memento ink and stamp the sentiment to the right side of the Whisper White strip. Tip: Always use the Stampin’ Pierce Mat with the Photopolymer stamps to get the best image.

Using the Memento ink, stamp the cake and the platter onto the 3 x 3 inch piece of Whisper White.

There is a Cake Builder punch but it will not be available to order again until March 18, 2019. It was overwhelmingly popular. So we are going to fussy cut the platter and cake with the Paper Snips. Leave a 2-3 mm border around the outside line of the image.

Use the Light Flirty Flamingo Stampin’ Blend alcohol marker to color the stripes and the smaller circles.

Use the Dark Flirty Flamingo Stampin’ Blend alcohol marker to color the larger circles and the layers.

Place the strip of Flirty Flamingo on the card just below half-way. Hold the cake in place and use a pencil to draw a light line where the top of the cake is.

Use the Memento ink to stamp the candles just at the pencil mark.

Use the Dark Flirty Flamingo Stampin’ Blend alcohol marker to color the candles.

Use the Light Mango Melody Stampin’ Blend alcohol marker to color the flames.

Adhere the sentiment strip to the Flirty Flamingo strip.

Adhere the strip about 1/4 inches below the candles.

Use the Mini Stampin’ Dimensionals on the back of the cake and the platter.

Adhere the cake then the platter.

That was a quick and easy card that I hope you will enjoy making. It is a wonderful card to send when wanting to just send a hello or quick note and is sure to put a smile on the recipients face!

In the next post we will be making a Birthday card, so I hope you will join me!

Stampin’ UP! Sale-a-bration is going on until March 31, 2019 but some of the free choices have already run out, so don’t delay in making your order. For every $50 ordered you can choose a free product from the Sale-a-bration brochure. The Butterfly Elements, Lovely Lipstick and Grapefruit Foil sheets and the Precious Parcel card kit have run out.

Stampin’ Up! products used include: Stamp set: Piece of Cake #148610; Cardstock: Whisper White #100730 and Flirty Flamingo #141416; Ink: Memento #132708; Stampin’ Blend Alcohol Markers: Flirty Flamingo combo #147278 and Light Mango Melody #147943; Clear Blocks: D #118485 and I #118488; Paper snips #103579; Stampin’ Pierce Mat #126199; Multipurpose Liquid Glue #110755 and Mini Stampin’ Dimensionals #144108.

Posted in beginner stamper, Cake, Occasions Catalog 2019, Photopolymer

Take Time to Eat Cake

I had meant to have a nice blog out for you today, but every time I turned around there was an obstacle. Ever have a day like that? The sentiment on today’s card, “Life is too short to say no to cake,” really strikes home. Life is too short, so we all have to take time to savor the sweet things, even if it means the blog doesn’t get done until late at night.

This card again uses the Stampin’ Up! stamp set Amazing Life. The colors are Lemon Lime Twist and Berry Burst.

Measurements: Whisper White card base 8 1/2 x 5 1/2 inches folded at 4 1/4 inches, Lemon Lime Twist 5 1/4 x 4 inches, Berry Burst 5 x 3 3/4 inches and Whisper White 4 x 3 inches.

You will also need Memento ink (not pictured), Berry Burst ink and the Mini Ruffled Ribbon in Lemon Lime Twist.

The first step is to use the Berry Burst ink and the little flower stamp to create a background. You don’t really need to stamp the center because it will be covered by the next layer.

Lay the next layer over the top of the stamped background to ensure you have everything stamped.

Tip: The best way to get a Photopolymer strip on straight is to lay it on the paper and pick it up with the block.

Use the Berry Burst ink and position the stamp right on the edge of the Whisper White 4 x 3 inch piece. Take care to go straight down and straight up without rocking so you do not get ink where you do not want it.

Stamp around all of the edges.

Now use the Memento ink to stamp the sentiment on the bottom half of the framed card piece.

Use the Berry Burst ink to stamp the cake on the top half.

Adhere the stamped flower piece to the Lemon Lime Twist. Measure out the ribbon to be about 1 inch longer on either side so it will wrap around the card piece.

Use the Glue Dots by putting the ribbon right on the dot. Put a Glue Dot on each end, then wrap the ribbon around just a little lower than the middle of the card piece. Push firmly on the back of the card piece.

Now adhere this piece to the card base.

Apply Stampin’ Dimensionals to the back of the stamped cake piece.

Adhere the cake piece to the stamped flower piece.

Tip: To easily adhere the clear rhinestones, use the Paper Piercing Tool. Lift up the rhinestone with the tool and position on your card, then use your finger to press the rhinestone down onto the cardstock.

And there you have it! Better late than never!

Stampin’ Up products used include: Stamp Set: Amazing Life #148750; Cardstock: Whisper White #100730, Berry Burst #146944 and Lemon Lime Twist #146947; Ink: Memento #132708 and Berry Burst #147143; 3/8 Inch Mini Ruffled Ribbon in Lemon Lime Twist # 146947; Clear Rhinestones #144220; Clear Blocks: C 118486, E #118484 and I #118488; Paper Snips #103579; Paper Piercing Tool #126189; Mini Glue Dots #103683; Stampin’ Dimensionals #104430 and Multipurpose Liquid Glue #110755.